子类目
(三级类目)
生产厂家:
(品类: 107)
CONTROLS PLC SIEMENS S7 FEEDSTOCK TUBE external diameter min.: 30 mm external diameter max.: 120 mm length min.: 3000 mm lenght max.: 7500 mmPRODUCT (PROFILE, TUBE) length min.: 4000 mm lenght max.: 8800 mmCHARACTERISTICS DRAWING MACHINE force: 450 kN drawing length max.: 8800 mm number of parallel trains / strands max.: 1 speed max.: 100 m/min drive system -drawing machine-: chain Function: Semi-automatic (pull chain runs forwards, front bench can be rotated)Products: Round tubes, precision tubes, cardan shafts, squaresmax. drawing rod / pointed end diameter: 80 mmmin. drawing rod / pointed end diameter: 25 mmmax. drawing rod / pointed end length: 220 mmmin. drawing rod / pointed end length: 170 mmmumber of drawing jaws: min. 1 jaw and 1 reserve jawdrawing ...
工作宽度: 2040 mm 板材厚度:约 1 mm 后料: 600 mm 手机尺寸: 2400 x 1070 x 1100 mm 重量:约 900 kg ... 更多信息
规格: - 最大工作宽度 2040 mm - 最大材料厚度为 40 kg / mm²,强度 4 mm - 弯曲角度调节可预选 0 - 135 ° - 上梁的最大开口宽度/行程 350 mm - 高度可调性 - 弯曲梁 100 mm - 下梁 100 mm - 上梁驱动 400 V / 4 kW - 折弯梁驱动 400 V / 4 kW - 大约需要空间 宽 3200 x 高 1650 x 深 1500 mm - 重量约。 3900 千克
修枝剪 2000 x 3 mm 铡刀剪 K20 Wülkow Dillenburg 机器位置:76661菲利普斯堡 可以在现场查看机器。它工作得很好。 您可以随时安排看房预约。 我们很乐意听取您的意见 ... 更多信息
4-roll Hydraulic plate bender 8000 x 40 mm. 1960 Froriep 8000Х40 mm Plate rolling machine - 4 rolls 8000Х40 mm ... 更多信息
技术参数约: -莫特。从动上滚轮 -手动。中辊进给 - 两个下辊都可以水平调节 - 轴径约 60 毫米 - 有效轴长约 120 毫米 - 一级工作速度 - 弯曲能力约: - - L. 和 T – R 1200 mm 70 x 7 mm 的外部熨斗 - - L – 铁内层 R 1200 mm 75 x 10 mm - - 扁钢 R 450 mm 100 x 15 mm - - 扁杆立柱 R 700 mm 60 x 10 mm - - 方棒 R 450 mm 30 x 30 mm - - 带特殊工具的管子 R 900 mm 50 x 5 mm -跟: - 标准折弯辊组 - 驱动 400 V / 3 kW - 重量约 1200 公斤 - 大约需要空间 宽 900 x 高 1500 x 深 1200 mm
板材宽度:5 mm板材厚度:1000 mm支架宽度:mm总功率要求:4 kW机器重量 约:2.8吨空间要求 约:m手动背影,脚部释放,设计稳定 设计材料宽度 x 板材厚度 1000 x 5 mm行程速率 50 /分钟重量,约 2,800 kg驱动 4 kW数据 fü,此广告是使用 ModulMWS 创建的 - LogoTech oHG 的机器管理
板材宽度:2500 mm板材厚度:30 mm弯曲:总功率要求:kW机器重量 约:t空间要求 约:m轴承数 2210015机器类型 液压板材折弯机制造HAUSLER类型 RMA 2500/301962年 控制类型 常规 附加信息最大板材宽度 2500 mm最大厚度 30 mm3 辊压材料顶板 450 mm该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理
最大工作宽度: 2040 mm 适用于最大 4.5 mm 的纸张 上脸颊的开口宽度: 320 毫米 可调节性弯曲脸颊: 120 毫米 上脸颊驱动:2.2千瓦 下脸颊驱动:2.2千瓦 电气。连接: 5 千瓦 重量: 3700 kg 空间要求:3250 x 1000 x 1900 mm ... 更多信息
工作长度: 1020 mm 最大纸张功率: 3.5 mm 尺寸(宽 x 深 x 高),约 1640 x 1860 x 1390 mm ... 更多信息
Description: SPECIFICATIONS Character: Haeusler Type: RMA 2,500x30 Year of construction: 1962 Mechanical: Yes Roller length: 2,500 mm Sheet thickness: 30 mm Number of rolls: 3 Upper roller diameter: ø450 mmweight approx.: 24,000 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 7,200 x 2,750 mm ... 更多信息
This ZDAS PKZZ 1000/4000 Stamping machine was built in the Czech Republic in 1962 and retrofitted in 1999. It operates with a stamping force of 10000 kN, stroke of 500 mm, and table dimensions of 4000 x 2100 mm. ... 更多信息
Guillotine shears, plate shears, plate shears, crank guillotine shears-Mechanical guillotine shears-Cutting width: 2040 mm-Max. Cutting thickness: 2.0 mm-Rear stop-Installation dimensions: 2650/1900/H1070 mm-Transport dimensions: 2650/730/H1070 mm-Weight: 1378 kg ... 更多信息
Description: Plate shears - mechanical - technical details, plate width 2000 mm, plate thickness 3 mm, distance between columns 2080 mm, total power requirement 5 kW, machine weight approx. 2.5 tweight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 2,850 x 1,450 x 1,410 mm ... 更多信息
工作宽度: 1040 mm 片材厚度: 12 毫米 后挡板:手部最大 500 mm 驱动功率:380 V,11 kW 空间要求:2500 x 2150 x 1900 mm 重量: 4100 kg ... 更多信息
板材宽度:1500 mm板材厚度:5 mm弯曲:4 顶部卷筒直径:185 mm子卷直径:185 mm侧卷直径:145 mm总功率要求:kW机器重量约:t机器尺寸 长 x 宽 x 高:4.0 x 1.23 x 1.6 m-锥形弯曲装置压。折叠轴承本广告的数据是使用Modul MWS创建的 - 徽标科技oHG的机器管理
板材宽度: 2000 mm 板厚: 1 mm 柱间距离: 2100 mm 总功率要求:6 kW 机器重量: 0,39 t最大弯曲长度 2000 mm 机器高度 1200 mm 机器长度 2400 mm 机器宽度 1000 mm机器重量 0,39 t ... 更多信息