开槽机

编号 ： 6485 型号： Q28B-4X200 制片人：ACL 创建时间：2006年 参数： 最大板材厚度：4-6 毫米 功耗： 4 kW 缺口： 250 x 250 mm 机器重量： 1350 kg 设备： 可调角�

机器类型：管道开槽机 制造商： ALMI 条件：非常好 报价类型：二手机器 规格： 功率：5 种尺寸 Ø 28 – 61 mm 驱动类型：el./mech。 推进力： 2.2 kW 备注：下部结构 重量： 100 kg 该机器状况非常好，可以立即使用，我们可以查看和� ��示。 如果您对我们的报价感兴趣，我们将非常高兴。 错误、修改和在售除外�

Description: Serial number: A6739. 2018 Massa: 450 KG Voltage: 220/230 V , Frequency: 50 HzApprox. Onsite Dimension. (l x w x h): 900 x 1,000 x 1,350 mm, weight approx.: 450 kg

plate thickness: 1,50 mmblade length: 150 x 150 mmtable:: 457 x 305 mmcutting angle: 90 °adjustment of stroke: 20,0 mmweight: 73,0 kgrange L-W-H: 460 x 630 x 1150 mm- Notching with a burr-free cut, without deformation of the cut edges- For punching out corners, shapes, etc. up to a maximum of 150 x 150 mm- Body made of high-quality gray cast iron for precise work- Blades made of surface-hardened tool steelFurnishing:- manual notching machine- 2x material stops- Scales support tables- hand leverThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

板材厚度： 4 毫米钢， 3 毫米不锈钢 角度在 30 到 120 度之间可调 重量： 1.000 千�

供应 22391 规格： - 切割长度可达 200 mm - 切割厚度 - 强度为 400N/mm² 的钢 6 mm - 不锈钢，强度 600 N/mm² 4 mm - 无级可变切割角度调节 30 - 120 - 气动夹紧 - 自动裁切间隙调整 - 锁定挡块左+右每300毫米 - 工作台支撑面 1000 x 800 mm - 带 T 型槽和深度挡块 - 工作台高度约 900 毫米 - 深度停止 - 驱动 400 V / 4 kW - E – 脚踏开关 - 大约需要空间 宽 1000 x 高 1350 x 深 1510 mm - 约重 1800 公�

型号 ： K 30 – 120 规格： 板材厚度 6 mm at 400 N/mm² 600 N/mm² 时为 4 mm 切割长度 200 mm 角度调整范围：30 - 120 ° 驱动功率约为 4 KW

: 4,0 mm: 3,0 mm: 30 - 120 Gradblade length: 150 x 150 mmwork height max.: 900 mmtable:: 1000 x 650 mmengine output: 3,0 kWweight: 850 kgrange L-W-H: 1250 x 1000 x 1160 mmFurnishing:- Notching machine with angle adjustment 30° - 120°- Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- adjustable lift height adjustment- 2x staking stops with movable and interchangeable stop bars- free-moving footswitch- Operation manualBOSCHERT angle adjustment:- the one-piece 30° upper knife is within one tool both with a left anddirectly connected to a right lower knife- once for each notch over 30°left and once on the right.- the swivel adjustment becomes pneumatic, immediatelyafter completion  ...

: 4,0 mm: 3,0 mm: 30 - 120 Gradblade length: 150 x 150 mmwork height max.: 900 mmtable:: 1000 x 650 mmengine output: 3,0 kWweight: 850 kgrange L-W-H: 1250 x 1000 x 1160 mm Machine like NEW () Furnishing:- Notching machine with angle adjustment 30° - 120°- Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- adjustable lift height adjustment- Waste bin- free-moving footswitch- Operation manualBOSCHERT angle adjustment:- the one-piece 30° upper knife is within one tool both with a left anddirectly connected to a right lower knife- once for each notch over 30° left and once on the right.- the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightni ...

: 4,0 mm: 3,0 mm: 30 - 120 Gradblade length: 150 x 150 mmwork height max.: 900 mmtable:: 1000 x 650 mmengine output: 3,0 kWweight: 850 kgrange L-W-H: 1250 x 1000 x 1160 mmFurnishing:- Notching machine with angle adjustment 30° - 120°- Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- adjustable lift height adjustment- 2x staking stops with movable and interchangeable stop bars- Waste bin- free-moving footswitch- Operation manualBOSCHERT angle adjustment:- the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife- once for each notch over 30° left and once on the right.- the swivel adjustment becomes pneumatic, immediately a ...

- 切割长度：220毫米 - 容量：4毫米 - 切割角度：90° - 所需功率 ： 2.2 kW - 工作电压：400 V - 宽 x 高 x 深尺寸：约 850 x 1100 x 1100 毫米 - 重量：约600公�

容量： 225 x 225 x 4 毫米钢 工作台尺寸： 1000 x 800 mm 电机功率： 4 kW 原产国： 意大利 机器长x宽x高：1100 x 820 x 1050 mm 机器重量： 700 kg

发动机。可调角度开槽机（二手） 制造商： COMACA 型号 Junior T 10 刀长 210 mm x 210 mm 切割能力：低碳钢 4 mm 切割能力 不锈钢 3 mm 每分钟冲程 45 工作台尺寸 1280 x 650 mm 可变角度切割装置 VARCUT 200 切割角度范围从30度到150度 驱动功率 2.9 kW 重量约 450 kg 空间要求 长 1280 米 宽 930 毫米 高 1500 毫米 2 个角度挡块 脚踏开关 载重量 10 吨 操作说明 该机器处于一流的状态，可立即使用。 提供叉车，自由装载的卡车 可能便宜的运输 机器位置 48324 Sendenhorst 咨询电话：0157-35496006 价格为净价加19%增值税�

板材厚度：6.0 mm压力：18 t切割角度 - 上刀：90 刀片长度：225 x 225 mm工作电压：380 V总功率要求：5.5 kW机器重量约：650 kg空间要求约：1.10 x 0.80 x 1.05 m - 角度停止可调此广告是使用ModulMWS创建的 - LogoTech oHG的机器管理�

切割长度： 225 mm 片材厚度： 3 毫米 电气。连接： 380 V， 1.5 kW 重量： 约 800 公斤 空间要求：1080 x 820 x 1050 mm

plate thickness: 6,0 mm STplate thickness: 4,0 mm VAtable-size: 1200 x 900 mmblade length: 250 x 250 mmstrokes per minute: 45 minadjustable: Winkel 30°-135° mmwork height max.: 1050 mmengine output: 4,0 kWweight of the machine ca.: 1.300 kgrange L-W-H: 1200 x 1350 x 1600 mmFurnishing:- Robust electro-hydraulic notching machine- with adjustable angle, electro-hydraulic adjustment- 2x speeds- Inching mode for adjusting the shear blades- 2x adjustable stop rulers- Machined work table, with T-slots- free-moving footswitch- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

板厚： 4 mm 刀片长度： 250 mm 角度可调范围：FEST 90 坡度表面积：900 x 800 mm总功率要求：kW机器重量约： 0.65 t尺寸：1.2 x 0.9 x 1.1 m液压开槽机 - 脚踏开关 - 2 个钣金挡�

板材厚度：见TD mm压力：见TD t总功率要求：4 kW机器重量约：0.950 t空间要求约：900 x 1050 x 1300mm m开槽机制造商DURMA类型：VN2006建造年份：新技术数据� ��割能力：6-4mm切割尺寸：200 x 200mm切割角度：30-140行程每分钟数：28mm/m电机功率：4k W工作压力：210 3045 PSL棒油容量：50lt。高度：1300毫米宽度：1050毫米长度� ��900重量：950千克噪音功率（空）：66 dBA噪音功率（收费）：77分贝此列表是使用ModulMWS创建 的 - LogoTech oHG的机器管理�

plate thickness: 6.5 mmthickness at Niro-steel: 5.0 mmangle adjustable from - to: 30 - 140 Gradno. of strokes: ca. 50 Hub/mintable:: 950 x 1030 mmblade length: 220 x 220 mmtotal power requirement: 4.0 kWweight: 800 kgrange L-W-H: 1100 x 950 x 1280 mm current new price approx. 25.000 euros Special price on requestFurnishing:- electro-hydraulic notching machine- Multi-functional machine with 2x workstations 1x notching, 1x bending station including bending tools- manual angle adjustment 30 - 140 degrees 2x handwheels for angle adjustment- large / stable work table- 2x angle stop, adjustable- automatic cutting gap adjustment- freely movable foot switch- Connection cable + 16A plug- Cutting performance: 6.0 mm to 60° ST 5.0 mm to 60° VA 4.0 mm to 30° ST 3.0 mm to 30° VA Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9397094The data for this ad was cr ...

板厚：4 mm刀片长度：200 mm角度可调 - 至：jede Seite 15 - 60 Grad表面积：1000 x 780 mm总功率要求：5,0 kW机器重量：0.9吨 尺寸：1.6 x 1.1 x 1.75 m液压开槽机 - 脚踏开关 - 2 件。 钣金挡�

板材厚度：2.0毫米管径：60.0毫米电机：400伏设备：- 电动管道开槽机- 用于管道 12 - 16 - 22 - 27 - 33 - 42 - 48和60 mm- 壁厚2.0毫米数据fü，本广告是用ModulMWS创建的 - LogoTech oHG的机器管理�

plate thickness: 4,0 mm STplate thickness: 3,0 mm VAtable-size: 1200 x 780 mmblade length: 200 x 200 mmstrokes per minute: ca. 60 minangle adjustable from - to: 15 - 150 Gradengine output: 4,0 kWweight of the machine ca.: 1200 kgdimensions of the machine ca.: 1700 x 1000 x 1500 mmFurnishing:- electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels- front panel- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- lateral clippings ejection- free-moving footswitch- Operation manual Machine link :http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9397088The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4,0 mm STplate thickness: 3,0 mm VAtable-size: 1200 x 780 mmblade length: 200 x 200 mmstrokes per minute: ca. 60 minangle adjustable from - to: 15 - 150 Gradengine output: 4,0 kWweight of the machine ca.: 1200 kgdimensions of the machine ca.: 1700 x 1000 x 1500 mmFurnishing:- electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels- front panel- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- lateral clippings ejection- free-moving footswitch- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

板材厚度：6 mm压力：-t总功率要求：4 kW刀片长度：250 mm切割角度：90 冲程速率：35冲程/分钟- 新机器 - 具有固定切割角度，自动。切割间隙调整，2个机甲。 压持，2个定位停止，工作台上的校准尺，可移动的脚 踏开关和内部深度停止有关确切的标准设备和可用选� ��的更多信息，请访问我们或直接致电我们 数据fü，此广告是使用ModulMWS创建的 - LogoTech oHG的机器管理�

规格： - 切割长度可达约 220 毫米 - 切割厚度 - 钢，强度 400 N/mm² 4 mm - 不锈钢，强度为 600 N/mm²，强度为 3 mm - 切割角度 90 ° - 行程速率高达约 35 1/分钟 - 深度停止左+右 - 工作台支撑面 600 x 400 mm - 工作台高度约 1000 毫米 - E – 脚踏开关 - 驱动 400 V / 2.2 kW - 空间要求约 宽 800 x 高 1200 x 深 650 mm - 重量约 500公斤

Description: HOFFMANN MS35-SF Notching Saw dimension (l x w x h) approx. (2 packs) 1720 x 1150 x 1790 mm 2700 x 1000 x 1180 mmApprox. Onsite Dimension. (l x w x h): 1,720 x 1,150 x 1,790 mm, weight approx.: 1,200 kg

板材厚度：4.0毫米镍铁板厚度：3.0毫米刀片长度：200� ��米角度可调 - 至：30 - 120度行程速率：60冲程/分钟油含量：60升。工作台：� � 1000 x 800 mm总功率要求： 2.62 kW重量： 800 kg尺寸 L-W-H： 1000 x 1500 x 1440 mm设备：- 坚固的液压切槽机，可调节角度调节范围 30 - 120 度 使用 2x 前手轮进行调整- 液压夹紧和锁定- 切割深度可无级调节，带数字显示屏- 2x 锁定精度停止，带用于钣金切割的带材- 用于切割材料的收集容器 - 用于提升触发的自由移动脚踏板数据fü，此广告是� ��用ModulMWS创建的 - LogoTech oHG的机器管理�

板材厚度 4.0 毫米 不锈钢板厚度 3.0 mm 刀长 200mm 角度无级可调 30-135 度 冲程速率 60 冲程/分钟 油容量 60 升 工作台： 1000 x 800 mm 电机：4kW 重量 970 kg 尺寸 长 - 宽 - 高 1000 x 1660 x 1473mm 配件 备用刀�

板厚： 6 mm刀片长度： 200 mm角度可调范围 - 至： 30 - 135 分级表表面积： 780 x 1000 mm总功率要求：3,0 kW机器重量 ca.： 1,1 t尺寸： 1,4 x 0,8 x 1,3 m液压开槽机- 脚踏开关- 数字角度显示- 机器灯- 配件见图�

Description: Table approx. 1100 x 730 mm , Includes documentationApprox. Onsite Dimension. (l x w x h): 1,100 x 900 x 1,000 mm, weight approx.: 300 kg

最大切割长度： 200 mm 板材厚度： 4 mm 切割角度调整：30 - 135° 冲程速率：60 rpm 电气。连接： 400 V， 4 kW 重量：957 kg 尺寸： 1600 x 1000 x 1500 mm

供应 22346 规格： - 切割长度可达 200 mm - 切割厚度 - 钢可达 6 mm - 不锈钢直径达 4 mm - 无级可变切割角度调节 30 - 135° - 行程速率 60 1/分钟 - 工作台支撑面，带 T 型槽 800 x 1000 mm - 深度停止与刻度和角度调整 - 工作台高度 860 mm - 驱动 400 V / 2.2 kW - E. - 脚踏开关 - 大约需要空间 宽 1000 x 高 1650 x 深 1700 mm - 约重 1300 公斤

规格： - 切割长度 250 mm - 切割角度 90 - 切割厚度 - 普通钢可达 4 mm - 不锈钢最大 3 mm - 铝最大 5 mm - 行程速率高达约 55 转/分 - 工作台尺寸 宽 800 x 深 800 mm - 工作高度约为 940 毫米 - 停止的长度和度数无级可调 - 驱动 400 V / 4 kW - 注油 50 l - E - 脚踏开关 - 空间要求约为 宽 800 x 高 1250 x 深 900 mm - 重量约 700公�

plate thickness: 8,0 mm STplate thickness: 5,0 mm VAtable-size: 1000 x 950 mmblade length: 200 x 200 mmstrokes per minute: 60 H/minadjustable: Winkel 30°-140° mmwork height max.: ca. 950 mmoil volume: 60 lengine output: 4,0 kWweight of the machine ca.: 1200 kgrange L-W-H: 1000 x 1120 x 1700 mm from a maintenance workshop New price at the time ~ 21.000 eurosFurnishing:- Robust electro-hydraulic notching machine- with adjustable angle, electro-hydraulic adjustment- Adjustment by hand wheels (left + right knife segment)- hardened knives also for cutting stainless steel- front panel- electro-hydraulic knife clamping- Inching mode for setting the shear blades selectable (manual mode)- planed table surface, with T-slots to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- 2x blank holders- 1x free moving footswitch- front scrap switch  ...

plate thickness: 4 mmblade length: 200 mmtable surface area: 1000 x 780 mmangle adjustable from - to: 30 - 140 Gradwork height max.: 910 mmthickness at Niro-steel: 3 mmtotal power requirement: 4 kWweight of the machine ca.: 970 kgdimensions of the machine ca.: 1 x 1,66 x 1,47 mElectric 380 Volt: Foot switch: Squaring arm: 2 Stck.Hydraulic notching machine with adjustable angle from 30° to 140°, aut.cutting gap adjustment, hydr. clamping of the knives. As a rare special accessory, the machine has a lifting height and cutting length adjustmentDigital display. The height adjustment works, but in the cutting length range it always cuts the full length of 200 mm. Since the length reduction option is almost never ordered when purchasing these machines, except for a specific special application, we did not have the electronic device repaired. You can see the function of the machine in the v ...

规格： - 切割长度 250 mm - 切割角度 90 - 切割厚度 - 普通钢可达 4 mm - 不锈钢直径达 3 mm - 铝最大 5 mm - 行程率可达约 55 转/分 - 台面尺寸 W 800 x D 800 mm - 工作高度约为 940 毫米 - 长度和度数可无级调节 - 驱动 400 V / 4 kW - 注油 50 l - E - 脚踏开关 - 大约需要空间 宽 800 x 高 1250 x 深 900 mm - 约重 700 公�

开槽机，很少用 开槽机，使用较少 型号： VA 200/ 4 建设年份 / 赎罪日： 1995 制造商 / 品牌： 肯普弗莱 工作台尺寸： 1000 x 800 mm 性能：/容量： 4 毫米 / 用于钢 / 钢 400 Nm/毫米^2 3 毫米（用于不锈钢 600 牛米/毫米^2） 刀片长度： 205 mm 冲程数：每分钟 60 次 刀头： 30...135 （ 无级变 ） 重量/重量： 1，15 吨 连接功率：4 kW

plate thickness: 6 mmpressure: 12 tcutting range: Breite x Länge 200 mmno. of strokes: 15 Hub/mincutting angle: 30 - 140 °total power requirement: 4 kWweight of the machine ca.: 1,02 tdimensions of the machine ca.: 1065 x 900 x 1210 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

能力 约41.9 x 2.7 R21 x 8 毫米 精选 - 脚踏板 - 操作说明（荷兰） 气动�

Description: Round steel 30 mm Square steel 120 x 8 mm Angle steel 30 mmApprox. Onsite Dimension. (l x w x h): 1,000 x 1,500 x 1,800 mm, weight approx.: 400 kg

Description: Round steel 30 mm Square steel 150 x 8 mm Angle steel 90x8 / 50x6 mmApprox. Onsite Dimension. (l x w x h): 1,000 x 500 x 1,800 mm, weight approx.: 400 kg

圆角器（角冲头）适用于提供半径为矩形边缘。使用� ��种冲床和冲孔工具，可以加工纸张，纸板，铝复合� �料，最大2mm的铝（例如标志）和有色金属等材料。 转角圆角机 NPR-45 含 1 件冲孔刀 R 4 或 R 8 �

质量卓越的手动切口剪，用于无毛刺切割厚度达 1.5 mm 的薄板钢板/ST40 – 铝 2 mm，背景导向刀梁，剪切长度 150 x 150 mm，千斤顶角 90，尺寸 460 x 500 x 810 mm，重量 75 kg

Description: Flat steel scissors: Knife length: 220 mm Sheets up to: 11 mm Flat steel up to: 120 x 13 mm Profile steel scissors: Angle iron up to: 80 x 8 mm T-iron up to: 80 x 8 mm U and I steel up to: 120 mm Number of strokes: approx. 55 / min. Steel bar shears: Round steel up to: 32 mm Square steel up to: 30 mm Notcher: Sheets up to: 10 mm Latch width up to: 40 mm Latch depth up to: 80 mm Hole punch: Punching capacity: approx. 35 t = 25 Ø x 11 mm / 20 Ø x 13 mmApprox. Onsite Dimension. (l x w x h): 800 x 1,250 x 1,800 mm, weight approx.: 900 kg

开槽单元 RASKIN 125 x 125 x 3 毫米 可以在德国境内运输�

板厚： 3 mm 刀片长度： 250 mm 角度可调 - 至： Fest 90 毕业台表面积： 900 x 790mm总功率要求： kW机器重量： 0,7 t尺寸： 1,2 x 0,9 x 1,2 m开槽机- 脚踏开关- 急停开关- 可变释放角�

液压组合冲床 液压铁工、冶金工人 4 千瓦 900公�

pressure: - tpunching cross-cut in cmm: - stroke: 20 mmplate thickness: 4 mmblade length: 205 mmtable-size: 700 x 825 mmcutting capacity stainless steel: 3 mmthroat: 300 mmstrokes: 50 p. min.oil tank: 35 ltotal power requirement: 3 kWweight of the machine ca.: 720 tdimensions of the machine ca.: 0,7 x 0,83 x 1,1 mElectric 380 Volt: Hole punching device: Foot switch: Support arms: Squaring arm withh mm-scale: Puch tools ( diverse ): Fixed angle hydraulic punching/nothing machine, more automatic cutting gap regulation and HOLE PUNCHING HEAD.The cutting head is guided stably in guide columns over the entire stroke length, so that an exact cut is always made. The cutting angle is negative, i.e.the knives cut from front to back. This means the sheet metal cannot bendmove forward. The automatic cutting gap adjustment (patented) worksover the lower blades (therefore no tipping of the cutt ...

plate thickness: 4 mmblade length: 205 mmtable-size: 700 x 825 mmcutting capacity stainless steel: 3 mmthroat: 300 mmstrokes: 50 p. min.oil tank: 35 ltotal power requirement: 3 kWweight of the machine ca.: 720 kgdimensions of the machine ca.: 0,7 x 0,83 x 1,1 mElectric 380 Volt: Hole punching device: Foot switch: Support arms: Squaring arm withh mm-scale: Puch tools ( diverse ): Fixed angle hydraulic asuklink machine, more automaticCutting gap regulation and HOLE PUNCHING HEAD.The cutting head is guided stably in guide columns over the entire stroke length, so that an exact cut is always made. The cutting angle is negative, i.e.the knives cut from front to back. This means the sheet metal cannot bendmove forward. The automatic cutting gap adjustment (patented) worksover the lower blades (therefore no tipping of the cutting head and abrasion ofthe knife tips) and burr-free cuts are  ...

西马斯夫开槽机 型号 AF226/B - 卡帕西蒂特 220 x 220 x 6 毫米 - 液压 - 板连接 650 x 650 mm - 沃特贝丁 - 面条 - 纪录片 - 400V 荷兰马赫 金属加工机械 恩斯赫德 - 荷兰 （距离德国边境3公里�