恩斯特EG3M去毛刺机于1988年在德国制造。最大厚度为 70 mm 的工件的表面加工通过安装在机床中的去毛砂辊和两 以相反方向移动的刷辊进行干式”加工,用于边缘 圆。为了防止工件被拉入恩斯特EG 3 M去毛刺机的中心,要去毛刺的板材通过松弛轴承上的 驱动滚轮压在传送带上。恩斯特 EG 3/M 1400 自动去毛刺机还允许使用磁力带加工较小的工件。去 刺机的总重量为3500公斤。 恩斯特EG3M去毛刺机技术参数 - 最大工件厚度:70 mm - 最小工件厚度:1 mm - 最小工件长度:350 mm - 磁带上的最小工件长度:80 mm - 带抽吸装置的最小工件长度:100 mm - 磁力带上的最小板材表面(无凹口):40 cm2 - 带抽吸装置的最小板材表面:100 cm2 - 砂纸尺寸:1540 x 1400 mm - 砂纸速度:14米/秒 - 移 ...
品牌: ERNST 年份: 2012 型号: NEPTUN E/B 制作小时数:12000 应用类型:去毛刺 位置: 拉脱维亚 机器类型:去毛刺 可用性:立即 技术信息 控制单元 品牌: ERNST 工件 工件 Y: 1500 MM Z轴工件:0.8-100 MM 工件重量: 100 KG
钣金去毛刺机 制造商: 恩斯特 型号: EM5/N900 建造年份:1999年 控制类型:常规 工作宽度: 880 mm 工件高度: 1-70 mm 研磨鼓直径: 420 mm 机器重量约: 2,800 kg 尺寸约: 2,500 x 1,715 x1,675 mm 在湿磨过程中工作的自动钣金去毛刺机 自动磁力过滤系统 湿式砂光装置 洗涤和烘干设施 磁悬浮宽度: 200 mm 小零件的最小长度:80毫米
working width:1400 mm Workpiece thickness max.: 80 mm work height max.:1000 mm Feed speed:4m/min I Stufe, 8 II Stuf m/min. Required air-pressure:max. 5 bar voltage:50 Hz, 380 V workpiece length:320 mm workpiece thickness min.:1 mm weight of the machine ca.:3500 kg Documents:vorhanden
working width:880 mm workpiece height:1- 70 mm work height max.:1000 mm Feed speed:4- 8 m/min. voltage:50 Hz, 400 V weight of the machine ca.:2.800 kg dimensions of the machine ca.:2500 x 1715 x1675 mm width:min. 350 mm Sanding cylinder diameter:420 mm electr. connected load:20 KW Required air-pressure:1 x R3/ 8 " pressure:5 bar tank:des Bandfilter ca.200 l automatic magnetic filter unit:vorhanden grinding tools:1540 x 900 mm accessories::9 Bänder Documents:vorhanden
制造商: 恩斯特自动磨床, 类型: 840-2, 建造年份: 2003, 机器装配: 横向/长/长/长/长/刷, 研磨宽度 mm: 1305, 研磨高度 mm: 3-120, 砂光带数量: 4, 砂光带尺寸: 2620 X 1350/5400 X 150, 电动工作台高度调节: 是, 滚轮: 否, 皮带 1 酷勒研磨单元: 是, 皮带 1 功率 kW: 18.5, 体积 2 热靴单元: 单工靴, 卷 2 组合单元 滚筒/热靴: 否, 体积 2 功率 kW : 否 30, 卷 3 组合单元 滚轮/热靴: 单工履带, 皮带 3 功率 kW : 30, 卷 4 组合单元 滚筒/热靴: 双工双工鞋, 卷 4 功率 kW: 37, 电子触摸 mm: 是, 电动工作台高度调整: 是, 进给可变 m/min: 13.5-60, 输送带驱动 kw: 约 4, 工作台高度常数: 880, 真空表: 是, 分段研磨鞋: 是, 除尘: 是, 电离: 是, 重量 kg ...
制造商: 恩斯特, 类型: Vakuum 通风器, 年份: 1993, 进气口直径 mm: 约 120 mm, 发动机功率 kW: 2,5, 流量约 m3/h: 1500, V 型皮带驱动电机: 是, 出口侧 mm: 约 100, 年份 :1993
Manufacturer: Ernst, Type: 830-2, Monting of the machine: längs / längs / längs, Sanding width mm: 1.350, Sanding hight mm: 3 - 120, Number of sanding belts: 3, Sanding belt dimensions: 1.400 x 3.150, Band 1 Leistung kW : 11, Belt 1 shoe unit: yes, Band 1 Schleifbandgeschwindigkeit m/s : 2 - 10, Belt 2 shoe unit: yes, Band 2 Leistung kW : 11, Band 2 Schleifbandgeschwindigkeit m/s : 2 - 10, Band 3 Leistung kW : 18, Band 3 Schleifbandgeschwindigkeit m/s : 1 - 7, Frequency control of belts: 3, Continous adjustable feeding speed m/min: 8 - 30, Vacuum table: yes, Brushing unit: 3 kW, Diameter/ brush bristles: 200,
制造商: 恩斯特 , 类型: AB 1 1300, 年份: 1982, 控制: 否, 压缩空气净化: 是, 装置数量: 2, 装置直立安装: 是, 卷筒运输: 是, 进料速度连续可调: Gekoppelt an Schleifmaschine, 转子喷嘴: 卡纳尔, 免费文本: Arbeitsbreite 1400/Arbeitshöhe 80/inkl.涡轮机, 年份 :1982
制造商: 恩斯特, 类型: 830 J-2, 机器的蒙廷: 淬火机, 砂光宽度 mm: 1380, 砂光高度毫米: 3 - 120, 砂光带数量: 3, 砂光带尺寸: 5.400 x 150 + 3.150 x 1.400, 横向砂光单元: 1, 朗施莱法格栅: 2, 带 1 莱斯顿 kW : 15, 带 2 莱斯通 kW : 30, 波段 3 莱斯顿 kW : 37, 连续可调进料速度 m/min: 12 - 36, 中间磨漆: 否, 恒定工作台最高价: 约 880, 真空工作台: 7,5, 刷涂装置: 1,1, 重量(公斤): 7.400
Description: Includes accessories such as replacement tips, dial gauge holder and more. (see pictures) Approx. Onsite Dimension. (l x w x h): 400 x 350 x 100 mm, weight approx.: 10 kg
working width: 1380 mm workpiece height: 70 mm : total power requirement: 45 kW weight of the machine ca.: 5.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
work piece width: 1500 mm plate thickness: 0,8 - 100 mm Brush width: 490 mm Brush diameter: 200 mm immersion travel: ca. 1.5 - 2.0 mm grinding speed: 200 - 1200 U/min band speed: 0,8 - 4.0 m/min work height max.: 950 mm Required air-pressure: 5.0 bar Air consumption: 80.0 l/min. number of brushing / polishing units: 8 Stück Control: NC Touch voltage: 400 V total power requirement: ca. 40.0 kW weight of the machine ca.: 6.100 kg. dimensions of the machine ca.: 3700 x 2750 x 2080 mm Well maintained condition with lots of accessories New price including accessories approx. 180.000 euros Special price on request Furnishing : - ERNST dry wide belt sanding machine TYP ATLAS ER ROTOR” Area of application: - Slag removal / deburring / edge rounding / finish grinding etc. - ERNST NC control including touch screen Control of the entire system graphically supported color terminal Adjustme ...