合缝机

sheet thickness - max.: 1,5 mmRoller stands: 7 Profile height max.: - mmspeed: 15 m/mintotal power requirement: 2,2 kWweight of the machine ca.: 260 kgdimensions of the machine ca.: 1,5 x 0,6 x 1,15 mElectric 380 Volt: Forming head made of two divided all-steel side links between which the shafts run in needle bearings on both sides. The head is mounted on an all-steel housing in which the drive motor is housed. Machine rollable. The set of rollers is probably standing seam, but on the other hand we cannot describe the profile rollers. The buyer must obtain the appropriate roller set.Selling due to owners illness and retirement.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet thickness - max.: 1,5 mmRoller stands: 7 Profile height max.: - mmspeed: 15 m/mintotal power requirement: 2,2 kWweight of the machine ca.: 260 kgdimensions of the machine ca.: 1,5 x 0,6 x 1,15 mElectric 380 Volt: Forming head made of two divided all-steel side links between which the shafts run in needle bearings on both sides. The head is mounted on an all-steelhousing in which the drive motor is housed. Machine rollable. The set of rollers is probably standing seam, but on the other hand we cannot describe the profile rollers. The buyer must obtain the appropriate roller set.Selling due to owners illness and retirement.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

对于卡扣式折叠和匹兹堡折叠的生产，我们提供折叠� ��型机，这些机器使用辊压成型工艺从扁平钣金带中� �各种钣金材料生产折叠工件。 断续器 辊压成型机，用于生产初始长度达 32 mm 的金扣式折叠和 S 形或 L 形折叠 – 以及折叠高度为 13 mm 的匹兹堡褶皱，材料厚度可重塑 – 钢 + 铝 0.6 mm 至 1 mm – 不锈钢 0.6 至 0.7 mm，成型站 9 件 – 吞吐速度 15 m/min，每米落料 20 件 – 冲孔距离 50 mm，尺寸约 2.3 x 0.7 m x H 1.1 m， 驱动功率 3 kW，重量 450 kg

Lockformer RAS 类型 22.15 输出功率： 2,2 kW 最大厚度： 1.5 mm 轮子直径： Ø 85 mm x 40 mm 电压：380 V 尺寸（长 x 宽 x 高）：1700 x 600 x 1100 mm 重量：约 350 公斤