数控折弯机

ALIKO SP4200-220 220吨数控液压折弯机于2006年在芬兰制造。该机器经过 专门设计，经过完美优化，即使是最密集的折弯，压� ��达 220 吨，行程为 900 毫米的滑块，能够高效生产大型非标准零件。所有这� ��，再加上稳定的设计和低能耗，使 ALIKO CNC 220-4200 数控压力机成为市场上其他折弯机的最佳选择。该报� ��还包括用于卸下适配器的适配器和托架。机器的总� �量为21500 kg。 ALIKO SP4200-220折弯机技术参数 - 冲压力： 220 t （2200 kN） - 最大工件长度：4200 mm - 滑块行程：900 mm - 最大刀具重量：1500公斤 - 响应时间：100 ms - 用于卸下适配器的适配器和托架 - 脚踏控制 - 压缩空气压力： 6 bar - 油箱容量：400升 - 最大油压：310 bar - 功率：11 kW - 电源：400 V;50赫兹 - 机器重量： 21500 kg

控制：使用 Step 12 装置进行改造 框架之间的距离： 2200 mm 行程： 100 mm 不带支架的开口高度：250mm 喉咙深度： 400 mm 工作高度：1030mm 折弯速度：7 mm/sec 接近速度：77 毫米/秒 回程速度：76 毫米/秒 尺寸（长x宽x高）： 2930 x 1595 x 2380 mm 重量：6200kg X1、X2 和 Y �

容量100吨 弯曲长度 3100 mm 轴数 6

pressure: 100 tchamfer lenght: 3140 mmdistance between columns: 2700 mmcolumn arm: 420 mmdayligth: 470 mmstroke: 200 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 100 mm/sectable width: 60.0 mmtable height: 960 mmoil volume: 150 L0: 300 barcontrolled axis: 8 AnzahlNumber of working hours: 47.800 htotal power requirement: 12.5 KWweight of the machine ca.: 7150 kgrange L-W-H: 4295 x 2285 x 2635 mm maintained condition () with approx. 47.800 operating hoursFurnishing:- CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) swiveling operation - front left Tool & program library- CNC-controlled back gauge adjustment (X1+X2 axis) Adjustment range .. 700 mm- CNC-controlled vertical adjustment of the stop fingers (R1+R2) Adjustment range .. 250 mm- CNC-controlled adjustment of the stop fingers left-right (Z1+Z2)- Hand control device for manual movement of the axe ...

压力/折弯机 AMADA HFE M2 1003 弯曲长度 3100mm 压力/德鲁克 100吨 数控 4 轴 / 数控 4 轴 制造年份。/ 建造年份 2012.10 条件/条件：非常好，准备操作/非常好，准备立即使� � 不包括弯曲工具/不带弯曲工�

AMADA HFE 170-3 L 数控折弯机于 2000 年在法国制造。该机床设计用于折弯最大长度为 3100 mm 的工件，具有七个数控轴（Y1、Y2、X1、X2、R、Z1、Z2） 和 170 吨冲压力。这允许非常高的加工精度，并且由于偏转� ��头补偿功能，沿着弯曲板的整个长度存在所需的角� �。 所有加工参数均通过位于手臂上的直观且易于使用的A MADA数控装置进行编程。该压力机使用了 15656 小时（每天运行 5.5 小时，运行 8 小时）。折弯机的总重量为12400公斤。 AMADA HFE 170-3 L 折弯机技术参数 - 数控控制器：天田 - 最大冲压力： 170 t （1700 kN） - 数控轴数：7 （Y1， Y2， X1， X2， R， Z1， Z2） - 最大工件长度：3100 mm - 偏转箭头补偿 - 滑块最大行程：350 mm - 响应时间：100 ms - 工作时间：15656小时 - 功率： 16 ...

容量 220 吨 长度 3000 mm 轴数 8

pressure: 50.0 tchamfer lenght: 2090 mmdistance between columns: 1665 mmcolumn arm: 400 mmtable width: 60,0 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 100 mm/secstroke: 200 mmtable height: 910 mmdayligth: 470 mmNumber of working hours: 27.900 htotal power requirement: 6.0 KWweight of the machine ca.: 4850 kgrange L-W-H: 3458 x 2450 x 2450 mm maintained condition () with only approx. 27.900 operating hoursFurnishing:- CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) swiveling operation - front left- CNC-controlled back gauge adjustment (X1+X2)- CNC-controlled vertical adjustment of the stop fingers (R1+R2)- CNC-controlled adjustment of the stop fingers left-right (Z1+Z2)- Hand control device for manual movement of the axes- AMADA manual upper tool clamping system- 1x freely movable foot switch- side protection device (pivoting doors) incl. SICK saf ...

100 吨 x 3000 毫米，带 ANTIL 机器�

220吨 x 4000mm

弯曲长度 2500 mm 弯曲力 80吨 轴数 4

pressure: 40 tchamfer lenght: 1300 mmdistance between columns: 1000 mmcolumn arm: 300 mmajustment speed: 180 mm/secworking feed: 10 mm/secreturn speed: 150 mm/secwork stroke: 180 mmback stop - adjustable: 650 mmtotal power requirement: 5,5 kWweight: 2,5 tOverall size: 2,12 x 2,0 x 2,1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 tchamfer lenght: 1300 mmdistance between columns: 1000 mmcolumn arm: 300 mmajustment speed: 180 mm/secworking feed: 10 mm/secreturn speed: 150 mm/secwork stroke: 180 mmback stop - adjustable: 650 mmtotal power requirement: 5,5 kWweight: 2,5 tOverall size: 2,12 x 2,0 x 2,1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 tchamfer lenght: 1300 mmdistance between columns: 1000 mmcolumn arm: 300 mmajustment speed: 180 mm/secworking feed: 10 mm/secreturn speed: 150 mm/secwork stroke: 180 mmback stop - adjustable: 650 mmtotal power requirement: 5,5 kWweight: 2,5 tOverall size: 2,12 x 2,0 x 2,1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 tchamfer lenght: 1300 mmdistance between columns: 1000 mmcolumn arm: 300 mmajustment speed: 180 mm/secworking feed: 10 mm/secreturn speed: 150 mm/secwork stroke: 180 mmback stop - adjustable: 650 mmtotal power requirement: 5,5 kWweight: 2,5 tOverall size: 2,12 x 2,0 x 2,1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tchamfer lenght: 3100 mmdistance between columns: 2550 mmcolumn arm: 450 mmajustment speed: 160 mm/secworking feed: 10 mm/secreturn speed: 120 mm/secwork stroke: 270 mmback stop - adjustable: 650 mmtable height: 850 mmtable width: 100 mmtank capacity: 200 ltotal power requirement: 7,5 kWweight: 7,5 tOverall size: 3,76 x 2,15 x 2,76 mGENERAL SPECIFICATIONSHydraulic operation with two cylinders – AssistmachHigh performance hydraulic gear pump – RexrothHigh pressure filter (with clogging detector and bypass) placed before all components,Air removal filter in the reservoirFast descent by gravity, bending phase and return of the ram are controlled electronically via a proportional flow valves hBending force controlled by proportional pressure valves – RexrothQuality oil with high viscosity indexFrame is designed and sized using Analyze programHydraulic components from lead ...

pressure: 135 tchamfer lenght: 3100 mmdistance between columns: 2550 mmcolumn arm: 450 mmajustment speed: 160 mm/secworking feed: 10 mm/secreturn speed: 120 mm/secwork stroke: 270 mmback stop - adjustable: 650 mmtable width: 120 mmtable height: 850 mmtank capacity: 200 ltotal power requirement: 11 kWweight: 8,5 tOverall size: 3,76 x 2.15 x 2,76 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 175 tchamfer lenght: 3100 mmdistance between columns: 2550 mmcolumn arm: 450 mmajustment speed: 160 mm/secworking feed: 10 mm/secreturn speed: 120 mm/secwork stroke: 270 mmback stop - adjustable: 650 mmtable width: 120 mmtable height: 920 mmtank capacity: 200 ltotal power requirement: 15 kWweight: 9,6 tOverall size: 3,76 x 2.25 x 2,92 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 tchamfer lenght: 3.100 mmdistance between columns: 2.550 mmcolumn arm: 450 mmajustment speed: 140 mm/secworking feed: 10 mm/secreturn speed: 120 mm/secwork stroke: 270 mmback stop - adjustable: 650 mmtable height: 920 mmtable width: 120 mmtank capacity: 200 lweight: 11 ttotal power requirement: 18,5 kWOverall size: 3,77 x 2,27 x 2,96 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 tchamfer lenght: 3100 mmdistance between columns: 2.550 mmcolumn arm: 450 mmajustment speed: 140 mm/secworking feed: 10 mm/secreturn speed: 120 mm/secwork stroke: 370 mmback stop - adjustable: 650 mmtable height: 920 mmtable width: 150 mmtank capacity: 300 lweight: 13,8 ttotal power requirement: 30 kWOverall size: 3,99 x 2,7 x 3,28 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 tchamfer lenght: 3100 mmdistance between columns: 2.550 mmcolumn arm: 550 mmajustment speed: 100 mm/secworking feed: 10 mm/secreturn speed: 100 mm/secwork stroke: 370 mmback stop - adjustable: 650 mmtable height: 1030 mmtable width: 150 mmtank capacity: 400 lweight: 19,5 ttotal power requirement: 37 kWOverall size: 3,99 x 2,7 x 3,28 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 175 tchamfer lenght: 3700 mmdistance between columns: 3100 mmcolumn arm: 450 mmajustment speed: 140 mm/secworking feed: 10 mm/secreturn speed: 120 mm/secwork stroke: 270 mmback stop - adjustable: 650 mmtable height: 920 mmtable width: 120 mmtank capacity: 200 lweight: 11,2 ttotal power requirement: 15 kWOverall size: 4,35 x 2,69 x 3,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 175 tchamfer lenght: 3700 mmdistance between columns: 3100 mmcolumn arm: 450 mmajustment speed: 140 mm/secworking feed: 10 mm/secreturn speed: 120 mm/secwork stroke: 270 mmback stop - adjustable: 650 mmtable height: 920 mmtable width: 120 mmtank capacity: 200 lweight: 12,3 ttotal power requirement: 18,5 kWOverall size: 4,36 x 2,69 x 3,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 tchamfer lenght: 3700 mmdistance between columns: 3100 mmcolumn arm: 450 mmajustment speed: 140 mm/secworking feed: 10 mm/secreturn speed: 100 mm/secwork stroke: 370 mmback stop - adjustable: 650 mmtable height: 920 mmtable width: 120 mmtank capacity: 300 lweight: 14,8 ttotal power requirement: 30 kWOverall size: 4,36 x 2,69 x 3,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 175 tchamfer lenght: 4100 mmdistance between columns: 3550 mmcolumn arm: 450 mmajustment speed: 140 mm/secworking feed: 10 mm/secreturn speed: 120 mm/secwork stroke: 270 mmback stop - adjustable: 650 mmtable height: 920 mmtable width: 120 mmtank capacity: 200 lweight: 11,6 ttotal power requirement: 15 kWOverall size: 4,67 x2,25 x 2,92 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 tchamfer lenght: 4100 mmdistance between columns: 3550 mmcolumn arm: 450 mmajustment speed: 140 mm/secworking feed: 10 mm/secreturn speed: 100 mm/secwork stroke: 270 mmback stop - adjustable: 650 mmtable height: 920 mmtable width: 120 mmtank capacity: 200 lweight: 19,8 ttotal power requirement: 18,5 kWOverall size: 4,67 x2,27 x 2,96 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 tchamfer lenght: 4100 mmdistance between columns: 3550 mmcolumn arm: 450 mmajustment speed: 140 mm/secworking feed: 10 mm/secreturn speed: 100 mm/secwork stroke: 370 mmback stop - adjustable: 650 mmtable height: 920 mmtable width: 150 mmtank capacity: 300 lweight: 17,0 ttotal power requirement: 30 kWOverall size: 4,71 x 2,55 x 3,1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 tchamfer lenght: 4100 mmdistance between columns: 3550 mmcolumn arm: 550 mmajustment speed: 100 mm/secworking feed: 10 mm/secreturn speed: 80 mm/secwork stroke: 370 mmback stop - adjustable: 650 mmtable height: 1030 mmtable width: 150 mmtank capacity: 400 lweight: 22,0 ttotal power requirement: 37 kWOverall size: 4,99 x 2,7 x 3,28 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 175 tchamfer lenght: 4600 mmdistance between columns: 4050 mmcolumn arm: mmajustment speed: mm/secworking feed: mm/secreturn speed: mm/secwork stroke: mmback stop - adjustable: mmtable height: mmtable width: mmtank capacity: lweight: ttotal power requirement: kWOverall size: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 tchamfer lenght: 4600 mmdistance between columns: 4050 mmcolumn arm: mmajustment speed: mm/secworking feed: mm/secreturn speed: mm/secwork stroke: mmback stop - adjustable: mmtable height: mmtable width: mmtank capacity: lweight: ttotal power requirement: kWOverall size: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 tchamfer lenght: 4600 mmdistance between columns: 4050 mmcolumn arm: mmajustment speed: mm/secworking feed: mm/secreturn speed: mm/secwork stroke: mmback stop - adjustable: mmtable height: mmtable width: mmtank capacity: lweight: ttotal power requirement: kWOverall size: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 tchamfer lenght: 6100 mmdistance between columns: 5100 mmcolumn arm: 450 mmajustment speed: 120 mm/secworking feed: 10 mm/secreturn speed: 100 mm/secwork stroke: 270 mmback stop - adjustable: 650 mmtable height: 1050 mmtable width: 120 mmtank capacity: 200 lweight: 19,8 ttotal power requirement: 18,5 kWOverall size: 6,67 x 2,55 x 3,1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 tchamfer lenght: 6100 mmdistance between columns: 5100 mmcolumn arm: 450 mmajustment speed: 100 mm/secworking feed: 10 mm/secreturn speed: 100 mm/secwork stroke: 370 mmback stop - adjustable: 650 mmtable height: 920 mmtable width: 150 mmtank capacity: 300 lweight: 23,5 ttotal power requirement: 30 kWOverall size: 6,67 x 2,55 x 3,1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 tchamfer lenght: 6100 mmdistance between columns: 5100 mmcolumn arm: 450 mmajustment speed: 100 mm/secworking feed: 10 mm/secreturn speed: 80 mm/secwork stroke: 370 mmback stop - adjustable: 650 mmtable height: 1030 mmtable width: 150 mmtank capacity: 400 lweight: 30 ttotal power requirement: 37 kWOverall size: 6,67 x 2,7 x 3,28 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 230 tchamfer lenght: 3600 mmdistance between columns: 3150 mmcolumn arm: 300 mmtable width: 200 mmdayligth: 450 mmstroke: 200 mmback stop - adjustable: 500 mmworking feed: 7,0 mm/secreturn speed: 80,0 mm/secwork height max.: 965 mmoil volume: 275 lPressure power: 265 bartotal power requirement: 18,7 kWweight of the machine ca.: 13300 kg.range L-W-H: 4100 x 2200 x 2670 mmFurnishing:- DELEM CNC control, model DA 56 (conversion in 2014) Pivoting control panel in front left- CNC electric backgauge (X axis) with 3x stop fingers, manually adjustable from the side- CNC pneumatic height adjustment of the stop fingers (R axis)- manual table crowning Adjustment by hand crank, with analogue display- 1x reversible MULTI V - universal die block- 1x complete set of upper tools- other / various application tools- free-moving 2hand/foot controlThe data for this ad was created with ModulMWS - t ...

压缩力：400 t 工作宽度： 4100 mm 净支架宽度： 3150 mm 支架放电： 330 mm 电气。连接： 400 V， 37 kW 重量： 约 25 t 空间要求：4100 x 2300 x 3910/530 mm

pressure: 230 tchamfer lenght: 5000 mmdistance between columns: 4050 mm: 800 mm: 500 mm: 300 mm: 600 mm: BC 45 Grafik : 18,7 kW: 22,0 t: 6,0 x 2,2 x 3,75 m- 4 stop fingers- Crowning device- Adjustment of the finger height manually via crank 140 mm- Groove in the front of the table- various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 90,0 tchamfer lenght: 2600 mmdistance between columns: 2050 mmcolumn arm: 310 mmajustment speed: 80,0 mm/secworking feed: 10,0 mm/secreturn speed: 80,0 mm/secback stop - adjustable: ca. 725 mmstroke: 120 mmdayligth: 475 mmtable height: 860 mmoil volume: 130 ltr.total power requirement: 11,0 kWweight of the machine ca.: 5500 kg. good condition ()Furnishing:- electro-hydraulic CNC press brake- with DELEM CNC control model DA 66W 2D graphical programming automatic bending sequence calculation and collision detection high quality color LCD screen (TFT)- swiveling operation, front left- controlled axes: Y1 + Y2 + X + R + CNC crowning- electric back gauge, on ball screws- with 2x manually adjustable stop fingers- motorized, electric CNC crowning- Upper tool holder system A (Amada), with upper wedge crowning- Lower tool holder Sysetm A (Amada)- LAZER Safe front laser protection device ...

pressure: 300 tchamfer lenght: 3100 mmdistance between columns: 2550 mmcolumn arm: 500 mmram stroke speed: 140 mm/secreturn speed: 150 mm/secwork speed: 10,0 mm/secwork stroke: 320 mmdayligth: 590 mmtable height: 905 mmoil volume: 400 ltr.voltage: 400 Voltworking pressure: 283 barNumber of working hours: ~ 21.835 htotal power requirement: 23,0 kWweight: 18.250 kgDimensions (HxWxD): 4550 x 2250 x 3050 mm current new price ~ 135.000 euros--------------------------------------------------Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds--------------------------------------------------Furnishing:- DELEM CNC control model DA 66T (touch screen) 2D graphic touch screen programming mode 17 high-resolution color TFT Complete Windows application suite Delem Modusys compatibility (module scalability and adaptivity) U ...

pressure: 200 tchamfer lenght: 4050 mmdistance between columns: 3650 mmtable width: 190 mmstroke: 250 mmthroat: 315 mmrapid traverse: 100 mm/sworking feed: 8 mm/secreturn speed: 75 mm/sectable height over floor: 800 mmtank capacity: 240 ltotal power requirement: 18,5 kWweight of the machine ca.: 17 tdimensions of the machine ca.: 4,4 x 1,8 x 3,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

库存号： 3866 CNC折弯机 制造商： BEYELER， 类型： PR 8 150D x 3100 mm 机床编号：96/445/002，制造年份：1996 规格： 折弯长度 3100 mm Gr. 压力能力 150 吨 行程长度 215 mm 立柱通道 2550 mm 投影 305 毫米 总功率 7.5 kW CNC控制 Cybelec DNC 908 PS Presscad Fabr. 在 4 轴 Y1-Y2-x1-x2 轴上控制 长度： 1900 mm， 高度： 2600 mm， 宽度： 3500 mm， 重量： 9500 kg

pressure: 150 tchamfer lenght: 4100 mmstroke: max. 315 mmControl: Cybelec ModEva15T pressing speed: 1 --> 10 mm/secclosing speed: max. 200 mm/secStop Time max.: 110 mScompressed air: max 8 bartotal power requirement: kWweight of the machine ca.: 13,2 t- Automatic bounce compensation- Hydraulic crowning of the lower beam- Table with hydraulic die clamping- 2 pieces of aluminum support arms with 3 grooves including stainless scale andAngle stop- hydraulic ram clamping type RF-A”- Hydraulic unit for punch and die clamping- Lifting and installation height increase by 100 mm- Roller conveyor guide on the front of the lower beam for front support arms- 2 pieces of H-axes manually with handwheel (height adjustment of the frontSupport arms over 200 mm, the weight is balanced by gas springs)- 2 pieces of hydraulic bending aids- 1st and 2nd measuring point for the Mini-Rotax angle measuring dev ...

pressure: 150 tchamfer lenght: 3100 mmdistance between columns: 2550 mmcolumn arm: 405 mmtable width: 150 mmajustment speed: 200 mm/secworking feed: 10.0 mm/secreturn speed: 120 mm/secstroke: 215 mmdayligth: 465 mmtable height: 960 mmoperating pressure: 320 baroil volume: 200 lvoltage: 3x 400 Vtotal power requirement: 15.0 KWweight of the machine ca.: 9500 kgrange L-W-H: 3958 x 2350 x 2750 mm maintained condition ()Furnishing:- BEYELER electro-hydraulic CNC press brake- CNC control CYBELEC model DNC 800 HP numerical CNC control unit 2D graphical programming & product display Color screen Tool & program library clear and logically structured screen pages Collision display Swivel operation, front right- CNC controlled axes (Y1+Y2-X-R-Z1+Z2)- CNC-controlled back gauge adjustment (X-axis)- CNC-controlled vertical adjustment of the stop beam (R-axis)- CNC-controlled adjustment of the stop fin ...

pressure: 100 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 255 mmstroke: 215 mmdayligth: 410 mmtable height: 890 mmajustment speed: 100 mm/secworking feed: 6,5 mm/secback stop - adjustable: max. 500 mmoil volume: 160 ltr.total power requirement: 5,5 kWweight: 7200 kgrange L-W-H: 3750 x 1450 x 2500 mmFurnishing:- electro-hydraulic press brake- CNC CYBELEC EURO III control unit- Control panel, right front- CNC electric back gauge (X axis)- 2x manually adjustable stop fingers- freely movable 2-hand/foot control- side protection device (protective grille)- rear protective device (protective grille)- Operating instructions machine + control Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9308337The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60.0 tchamfer lenght: 2050 mmdistance between columns: 1550 mmcolumn arm: 255 mmstroke: 165 mmdayligth: 360 mmtable height: 890 mmajustment speed: 85.0 mm/secworking feed: 6,5 mm/secback stop - adjustable: max. 500 mmoil volume: 100 ltr.total power requirement: 4,0 kWweight: 4600 kgrange L-W-H: 2700 x 1450 x 2400 mm Machine from a workshop for the disabled maintained condition ()Furnishing:- CNC electro-hydraulic press brake- CNC CYBELEC EURO IV control unit high resolution screen Clear, concise menus in the operators language Tools and products library- Control panel, right front- CNC controlled axes: Y1 + Y2 + X axis- CNC electric back gauge (X axis)- 2x manually adjustable stop fingers- AMADA-SYSTEM A upper tool adapter including upper wedge crowning very many bending/insertion tools (stamps + matrices)- 2x front material/sheet metal support arms- freely movable 2-hand/foot  ...

折弯机 制造商： 贝耶勒 型号：RT 1600x5100 CNC 建造年份：1986年 数控：赛贝莱克DNC60 压力：160至。 弯曲长度： 5，100 mm

250吨 x 3000mm 3100mm 本长 框架之间3200mm 海量模具包 弯曲辅助和语音控制!

500吨 x 5000mm Y1 Y2 X1 X2 R1 R2 Z1 Z2

3000 x 100 吨 由 Bystronic 定期维护，最近更换了机油。 Modeva 10 图形 CNC X1、Y1、Y2、R1、Z1、Z2 2021 年安装的新 Fiessler 灯罩 液压顶部工具夹紧 全套 250 V30 R1 顶部工具，包括分段部分

百超 PR 150 吨 x 4100mm 床身数控折弯机。包括西贝莱克DNC 1200 6轴控制。（Y1， Y2， X， Z1， Z2， R）自动啼叫。激光防护罩。液压顶部工具夹紧。侧面 和后部安全围栏。工具轮播。S/无04430044。2004 年新品�