二手 AK BEND 出售

: 1550 mm : 4,5 mm : 4,0 mm roll diameter: 140 / 210 mm : 2,2 kW : 1210 kg : 2650 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1050 mm : 5,5 mm : 5,0 mm roll diameter: 130 / 195 mm : 2,2 kW : 1050 kg : 2150 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2050 mm : 4,5 mm : 4,0 mm roll diameter: 140 / 210 mm : 1,1 kW : 1530 kg : 3220 x 1200 x 900 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

板材宽度：1050 mm 板材厚度：3.3 mm 弯曲：3.0 mm 卷长：1050 mm 卷直径：90.0 mm 最小直径：130.0 mm 电机功率：1.1 kW 重量：570 kg 尺寸 L-B-H：1，800 x 800 x 1，130 mm 设备： - 带电动驱动的 不对称 3 辊圆折弯机- 硬化辊 - 电动后滚轮调节 - 顶部滚轮旋转 - 锥形弯曲装置 - 自制动主电机 - 数字显示 - 脚踏开关 数据f&uml，此广告是用ModulMWS创建的 - LogoTech oHG的机器管理。

板材宽度：3100 mm 板材厚度：13.0 mm 弯曲：10.0 mm 顶卷直径：300 mm 侧卷直径：210 mm 子卷直径：270 mm 总功率要求：11.0 kW 设备： - hydr.-4辊 圆折弯机 - 锥形弯曲装置 - 感应淬火辊- 两侧辊 的数字显示屏- 移动控制面板 - 2 速 - 液压-折叠轴承 - CE - Mark /符合性 声明 - 床。说明 此广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。

板材宽度：3100毫米 板材厚度：8.0毫米 ST 弯曲：6.0毫米 ST 上卷直径：230毫米 侧卷直径：210毫米 子卷直径：190毫米 总功率要求：7.5千瓦 机器重量约：6，020公斤。 空间要求约为：5142 x 1390 x 1300 mm 设备：- 液压4辊圆折弯机 - 锥形弯曲装置，液压可调 - 感应淬火辊 - 两个侧辊 的数字显示 - 移动控制面板 - 2速 - 液压折叠轴承 - CE - 标志/符合性声明 数据fü，本广告是用ModulMWS创建的 - LogoTech oHG的机器管理。

sheet width: 2050 mm plate thickness: 4,5 mm pre-bending: 4,0 mm min. dia.: 210 mm roll diameter: 140 mm weight of the machine ca.: 1530 kg dimensions of the machine ca.: 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 900 mm table load: 1.000 kg Frontal Loading Center (A): 150 mm Side Loading Center (B): 150 mm Rotating speeds: 0,1 - 1,1 UpM T-slots: 6 x M16 Tilt Angle: 90-180-105 ° Tilting Speed: 30 sn min./90° weight of the machine ca.: 930 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

板材厚度：2.5 mm 滚筒体间距：260 mm 投影：500 mm 滚筒中心距离：92 mm 安装：35 mm 速度：3.5 m/min 总功率要求：1.5 kW 机器重量约：295 kg 空间要求约：1200x700x1200 mm 设备： - 电动串珠机 - 3 套渗流辊 - 脚踏开关 - 德国 - CE 标志/符合性声明 上的操作说明 ! !为您服务机器租赁长达60个月，无需首付，无残值， 个人建议和根据要求计算个人租赁费率。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。

板材厚度：4 mm 辊筒体间距：260 mm 投影：500 mm 卷筒中心距离：132 mm 安装：40 mm 速度：5 m/min 总功率要求：2.2 kW 机器重量约：350 kg 空间要求约：1650x700x1280 mm 设备： - 电动串珠机 - 3 套渗流辊 - 脚踏开关 - 德国 - CE 标志/符合性声明上的 操作说明 ! !为您服务机器租赁长达60个月，无需首付，无残值， 个人建议和根据要求计算个人租赁费率。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。

I - beam section - flat steel: 80 x 20 (d 1200) mm I-beam section - upend: 80 x 25 (d 2100) mm L-beam: 50 x 50 x 6 (d 1000) mm bar material - diameter: 40,0 (d 800) mm square material: 60x60x3 ( d 4000 ) mm rectangle: 80x30x3 ( d 6000 ) mm roll surface width: 177x60 (18x5 Nut) mm tool adaptor: 60 mm range L-W-H: 940 x 1260 x 1390 mm bar material dia. max.: 70 x 2 (d 1600) mm turning speeds: 6,4 m/min. total power requirement: 4,75 kW weight: 1080 kg range L-W-H: 950 x 1400 x 1450 mm Furnishing: - electro-hydraulic ring/profile bending machine - Hydraulic lower/side roller adjustment for extra small bending radii - Lower/side roller can be delivered individually - 3x powered rollers - divided roller segments - Digital position display of the bottom/side rollers Display with TouchScree function - hardened tool holder (42CrMo4) - Machine base - 2x manually adjustable side guides - Horizon ...

I - beam section - flat steel: 80 x 16 (d 1200) mm I-beam section - upend: 50 x 15 (d 1000) mm L-beam: 50 x 5 (d 1200) mm round material: 40,0 (d 800) mm bar material dia. max.: 70 x 2,0 (d 1600 ) mm square material: 80x30x3 (d 4000) mm channels - flange: UNP 80 (d 800 ) mm bending speed: 4,4 m/min roll diam. toproll: 157 mm bore: 50,0 mm total power requirement: 1,1 kW weight: 485 kg Furnishing: - electro-hydraulic ring/profile bending machine - Hydraulic lower/side roller adjustment for extra small bending radii - Lower/side roller can be delivered individually - 3x powered rollers - divided roller segments - Digital position display of the bottom/side rollers Display with TouchScree function - hardened tool holder (42CrMo4) - Machine base - 2x manually adjustable side guides - Horizontal and vertical work possible - freely movable control panel - Pressure gauge / pressure indicator  ...

L-beam: 40 x 5 (d 500) mm I - beam section - flat steel: 80 x 15 (d 700) mm I-beam section - upend: 50 x 10 (d 800) mm round material: 30,0 (d 700) mm bar material dia. max.: 60 x 2 (d 1200) mm square material: 50 x 30 x 3 mm range L-W-H: 670 x 530 x 1350 mm weight: 185 kg total power requirement: 0,75 kW Furnishing: - Robust electro-motor ring/profile bending machine - Horizontal and vertical work possible Machine head foldable by 90° - 1x free moving footswitch - segmented standard rollers (divided) - 2x motor driven rollers - manual delivery of the top roller - analogue position display of the top rollers (scale) - manually adjustable lateral/straightening rollers - CE mark / declaration of conformity - User manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I-beam section - upend: 100 x 20 (d 2100) mm bar material dia. max.: 100 x 3 (d 3000) mm L-beam: 80x80x8 (d 2000) mm square material: 50 x 25 x 2 (d 600) mm I - beam section - flat steel: 120 x 30 (d 600) max.140b mm bar material - diameter: 60,0 (d 1000) mm tool taper: 80,0 mm turning speeds: 4,2 m/min. weight: 1.600 kg range L-W-H: 1240 x 1375 x 1540 mm Ausstattung: - elektro-hydraulische Ring-/Profilbiegemaschine - hydraulische Unter-/Seitenwalzenverstellung für extra kleine Biegeradien - Unter-/Seitenwalze einzel zustellbar - 3x angetriebene Walzen - geteile Walzensegmente - digitale Positionsanzeige der Unter-/Seitenwalzen Anzeige mit TouchScree Funktion - gehärtete Werkzeugaufnahme (42CrMo4) - Maschinenuntergestell - 2x hydraulisch zustellbare Seitenführungen - horizontaler und vertikaler Arbeitseinsatz möglich - freibewegliches Bedienpult - Manometer / Druckanzeige für die  ...

I-beam section - upend: 120 x 25 (d 1600) mm bar material dia. max.: 140 x 3 (d 3000) mm L-beam: 100x100x10 (d 1600) mm square material: 140 x 40 x 3 (d 4000) mm I - beam section - flat steel: 200 x 35 (d 1000) mm bar material - diameter: 70,0 (d 800) mm tool taper: 100,0 mm 0: 315 mm turning speeds: 5,4 m/min. total power requirement: 11,0 kW weight: 2.240 kg range L-W-H: 1500 x 1650 x 2100 mm Furnishing: - hydr. Roller drive - Planetary gear delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard set of rollers, hardened - Hydraulically adjustable lateral straightening rollers - mobile control panel - 3 driven rollers - digital display - Machine can be used horizontally and vertically - CE mark / declaration of conformity - Operating instructions in German Special accessories included in the price: - hydraulic side roller adjustment  ...

plate thickness: 1,25 mm throat: 250 mm distance between roll centers: 62,0 mm engine output: 0,7 kW weight: 170 kg range L-W-H: 0,7 x 0,6 x 1,3 mm Furnishing : - 4x pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of various types of beads - high accuracy due to precision-bearing shafts - Clearly arranged switching elements - Underframe equipped with storage compartment - powerful drive motor, even under continuous load - Mobile foot switch for right and left rotation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mm plate thickness: 3,3 mm pre-bending: 3,0 mm roll diameter: 90 mm min. dia.: 130 mm total power requirement: 1,1 kw weight of the machine ca.: 570 kg dimensions of the machine ca.: 2100 x 800 x 1130 mm Domestic equipments: - Asymmetrical 3-roll round bending machine with motor drive - Upper roller swung out - Conical bending device - Main engine with brake device Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1300 mm table load: 7.000 kg Frontal Loading Center (A): 150 mm Side Loading Center (B): 150 mm Rotating speeds: 0,1 - 0,9 UpM T-slots: 6 x M24 Tilt Angle: 90-180-100 ° Tilting Speed: 30 sn min./90° weight of the machine ca.: 3.050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

片材宽度：2100毫米 片材厚度：8.0毫米 ST 弯曲：6.0毫米 ST 上卷直径：190毫米 侧卷直径：150毫米 卷下直径：170毫米 总功率要求：3.0千瓦 机器重量约：3，290公斤。 空间要求约为：4042 x 1380 x 1254 mm 设备：- 液压-4辊 圆弧弯曲机 - 锥形弯曲装置，液压可调 - 感应淬火滚子 - 两个侧滚子 的数字显示屏 - 移动控制面板 - 2个速度 - 液压 - 折叠轴承 - CE - 标记/符合性声明 此广告是使用ModulMWS创建的 - LogoTech oHG的机器管理。

sheet width: 3100 mm plate thickness: 6 mm pre-bending: 5 mm upper roll diameter: 170 mm min. bending diameter: Ø 255 mm bending speed: 4,5 m/min total power requirement: 4 kW weight of the machine ca.: 2300 kg dimensions of the machine ca.: 3800x1100x1130 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I - 钢 - 平： 120 x 15 （d 750） mm I-钢 - 直立： 60 x 10 （d 800） mm 角钢： 50 x 5 （d 1200） mm 圆形材料： 35.0 （d 800） mm 毛坯直径 最大： 70 x 2 （d 1200） mm 方形材料： 50 x 40 x 3 mm 弯曲速度： 4.3 m/min 卷直径 - 顶部： 155 mm 孔径： 50.0 mm 总功率要求： 1.5千瓦 重量：320千克 尺寸 L-W-H：730 x 830 x 1350 mm 设备： - 机座 - 水平和垂直工作插件 - 脚踏开关 - 标准滚子（分体式） - 2个驱动滚筒 - CE标志/符合性声明 - 德语 操作说明 本广告的数据是使用ModulMWS创建的 - LogoTech oHG的机器管理。

plate thickness: 2,5 mm roll-body distance: 260 mm throat: 500 mm distance between roll centers: 92 mm tool adaptor: 35 mm speed: 3,5 m/min total power requirement: 1,5 kW weight of the machine ca.: 295 kg dimensions of the machine ca.: 1200x700x1200 mm Domestic equipments: - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

板材宽度：1250 mm 板材厚度：5.5 mm 弯曲：5.0 mm 卷筒直径 - 顶部：140 mm 最小直径：210 mm 电机功率：2.2 kW 速度：5.7 rpm 重量：1365 kg 尺寸 L-W-H：2，020 x 900 x 1，200 mm 设备： - 2个由 电动机驱动的中心滚轮- 上脸颊旋转 - 锥形弯曲装置 - 脚踏开关 - 自制动主电机 - CE标志/符合性声明 包括特殊设备： - 电动后滚轮调节 - 硬化滚子 - 数字显示 本广告的数据是使用ModulMWS创建的 - LogoTech oHG的机器管理。

片材宽度： 2050 mm 板材厚度： 最大 4.5 mm板材厚度：弯曲4.0毫米 卷筒长度：2050毫米 最小直径：210毫米 卷筒直径 - 顶部：140毫米 重量：1530公斤 尺寸 L-W-H：3220 x 1200 x 900 mm 设备： - 顶部和下部滚子电气 驱动- 顶部滚子旋转输出 - 锥形弯曲装置 - 不对称滚子排列 - 自制动主电机 - 9月控制和控制面板 - 安全线 - 脚踏开关 - 德国 操作说明 - CE标志/符合性声明 价格中包含的特殊设备： - 硬化滚轮 - 电动后滚轮调节 - 数字显示 数据 fü，此列表是使用ModulMWS创建的 - LogoTech oHG的机器管理。

sheet width: 1050 mm plate thickness: 1,8 mm pre-bending: 1,5 upper roll diameter: 70 mm min. dia.: 105 mm total power requirement: 1,1 kW weight of the machine ca.: 320 kg dimensions of the machine ca.: 1700x700x1100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2100 mm plate thickness: 8 mm pre-bending: 6 mm upper roll diameter: 190 mm lower roll diameter: 170 mm side roll diameter: 150 mm total power requirement: 3 kW weight of the machine ca.: 3.450 kg Machine dimensions approx.: 4040x1380x1255 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 25 mm pre-bending: 20 mm upper roll diameter: 390 mm lower roll diameter: 360 mm side roll diameter: 300 mm total power requirement: 18,5 kW weight of the machine ca.: 17.100 kg Machine dimensions approx.: 5800x2100x2000 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...

sheet width: 3100 mm plate thickness: 6 mm pre-bending: 4 mm upper roll diameter: 210 mm lower roll diameter: 190 mm side roll diameter: 170 mm total power requirement: 7,5 kW Overall size: 5200x1400x1300 mm machine weight ab.: 5.400 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

板材宽度：4100 mm 片材厚度：13.0 mm ST 弯曲：10.0 mm ST 上卷直径：360 mm 侧卷直径：250 mm 子卷直径：330 mm 总功率要求：11.0 kW 机器重量约：16，000 kg. 空间要求约为：6542 x 1677 x 1900 mm 设备：- 液压-4辊圆折弯机 - 锥形弯曲装置，液压可调 - 感应淬火滚子 - 两个侧滚子 的数字显示屏- 移动控制面板 - 2个速度 - 液压 - 折叠轴承 - CE - 标记/符合性声明 本广告是用ModulMWS创建的 - LogoTech oHG的机器管理。

sheet width: 2100 mm plate thickness: 6 mm pre-bending: 4 mm upper roll diameter: 160 mm lower roll diameter: 140 mm side roll diameter: 120 mm total power requirement: 2,2 kW Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mm plate thickness: 5,5 mm pre-bending: 5,0 mm roll length: 1280 mm min. dia.: 210 mm roll diam. toproll: 140 mm weight: 1365 kg range L-W-H: 2.020 x 900 x 1.200 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round material: 40 mm tube diameter: 70x2 mm square material: 80x30x3 mm L-beam: 50 x 5 mm I - beam section - flat steel: 80 x 16 mm I-beam section - upend: 50 x 15 mm roll diameter: 157 mm Shaft diameter: 50 mm bending speed: 2,95 m/min total power requirement: 1,1 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: 1000x950x1450 mm Domestic equipments: - Special steel shafts (42CrMo4) hardened and ground - a set of standard rollers - lower rollers up and down hydraulically deliverable - digital display for lower rollers - separate control panel - in one direction manually adjustable lateral straightening rollers - manual lubrication - horizontal and vertical operation - CE mark / Declaration of Conformity - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

板材宽度：2600 mm 片材厚度：10.0 mm 弯曲：8.0 mm 顶卷直径：230 mm 侧卷直径：190 mm 子卷直径：210 mm 总功率要求：7.5 kW 机器重量约：5，560 kg。 尺寸 L-W-H： 4.650x1.380x1.300 mm 设备： - 液压-4 辊圆折弯机 - 锥形弯曲装置 - 感应淬火辊 - 两个侧辊 的数字显示- 移动控制面板 - 2 种速度- 液压折叠轴承 - 德国 - CE 标志上的操作说明 / 符合性声明 本广告的数据是使用 ModulMWS 创建的 - LogoTech 的 机器管理 呵呵。

板材宽度：1050 mm 板材厚度：1 mm 卷直径：56 mm 空间要求约：1600 x 700 x 1050 mm 设备： - 顶部滚筒手动旋转 可选设备： - 硬化滚子 ! !为您服务机器租赁长达60个月，无需首付，无残值， 个人建议和根据要求计算个人租赁费率。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。

sheet width: 2100 mm plate thickness: 13 mm pre-bending: 10 mm upper roll diameter: 230 mm lower roll diameter: 210 mm side roll diameter: 190 mm total power requirement: 7,5 kW weight of the machine ca.: 4.620 kg dimensions of the machine ca.: 4150x1400x1300 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

bending speed: 2.1 m/min Bending capacity - square: 30x30 mm bending capacity - flat iron: 80x15 mm Bending capacity - flat iron on edge: 50x10 mm tube diameter: 1 oder 60x2 mm Shaft diameter - upper: 35 mm Shaft diameter - lower: 30 mm total power requirement: 0,75 kw range L-W-H: 650 x 500 x 1300 mm weight: 170 kg Standard features: - hardened special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 960 mm table load: 3.500 kg Frontal Loading Center (A): 150 mm Side Loading Center (B): 150 mm Rotating speeds: 0,1 - 0,9 UpM T-slots: 6 x M20 Tilt Angle: 70-90-180 ° Tilting Speed: 30 sn min./90° weight of the machine ca.: 1.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

板材厚度：4.0毫米 投影：260毫米 卷筒中心距离：132毫米 行程：55 顶部滚筒毫米 支架：35毫米，12毫米 槽毫米 总功率要求：3.0千瓦 机器重量约：450公斤。 尺寸长宽高：1.6 x 0.9 x 1.2 米 设备： - 水化。调整 - 3套滚轮 接缝，双接缝，珠子，法兰滚子 - 双脚按钮 - 德语 操作说明 - CE标志/符合性声明 本广告的数据是用ModulMWS创建的 - LogoTech oHG的机器管理。

板材宽度：1550毫米 板材厚度：4.5毫米 弯曲：4.0毫米 卷长：1550毫米 最小直径：190毫米 卷筒直径-顶部：130毫米 电机功率：2.2千瓦 弯曲速度：5.3米/分钟 重量：1360公斤 尺寸 L-B-H：2，320 x 900 x 1，200毫米 设备： - 2个由 电动机驱动的中心滚筒- 上脸颊旋转- 锥形弯曲装置 - 9月控制面板 - 自制动主电机 - CE标志/符合性声明 价格中包含的特殊设备： - 硬化滚轮 - 电动后滚轮调节 - 数字显示 此列表的数据是使用ModulMWS创建的 - LogoTech oHG的机器管理。

sheet width: 2600 mm plate thickness: 10 mm pre-bending: 8 mm upper roll diameter: 230 mm lower roll diameter: 190 mm side roll diameter: 210 mm total power requirement: 7,5 kW weight of the machine ca.: 5.560 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

板材厚度：1.25 mm 滚筒体间距：250 mm 投影：260 mm 滚筒中心距离：62 mm 安装：26 mm 速度：6.3 m/min 总功率要求：0.7 kW 重量：170 kg 尺寸 L-W-H：1020x600x1500 mm 设备： - 电动串珠机 - 5 套渗流辊 - 脚踏开关 - 德国 - CE标志/符合性声明的 操作说明 ! !为您服务机器租赁长达60个月，无需首付，无残值， 个人建议和根据要求计算个人租赁费率。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。

板材厚度：2.5 mm 滚筒体间距：260 mm 投影：500 mm 卷筒中心距离：92 mm 安装：35 mm 速度：3.5 m/min 总功率要求：1.5+0.55 kW 机器重量约：320 kg 空间要求约：1200x700x1200 mm 设备： - 谐波可液压上下切换 - 3 套珠辊 - 脚开关 - 德语 操作说明- CE 标志/符合性声明 ! !为您服务机器租赁长达60个月，无需首付，无残值， 个人建议和根据要求计算个人租赁费率。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。

bar material - diameter: Ø 35 mm I-beam section - flat steel: 60x10 mm L-beam: 50 mm tube diameter max.: Ø 60x2 mm square material: 45x45x3 mm roll diam. toproll: 162 mm roll diam. bottom roll: 152 mm Shaft diameter: 50/40 mm turning speeds: 3,3 m/min total power requirement: 1,5 + 0,75 kW weight: 450 kg range L-W-H: 1050x950x1450 mm Domestic equipments: - hydr. Delivery of the top roller - standard roller set - side straightening rollers - Upper roll holder: 50.0 mm - Under roller diameter: 40.0 mm - Control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

板材宽度：3100 mm 板材厚度：16.0 mm ST 弯曲：20.0 mm ST 上卷直径：360 mm 侧卷直径：250 mm 子卷直径：330 mm 总功率要求：15.0 kW 机器重量约：13，200 kg。 空间要求约为：5542 x 2100 x 1983 mm 设备：- hydr.-4辊 圆弧弯曲机 - 锥形弯曲装置，液压可调 - 感应淬火辊 - 两个侧辊 的数字显示 - 移动控制面板 - 2个速度 - 液压 - 折叠轴承 - CE - 标志/符合性声明 本广告是用ModulMWS创建的 - LogoTech oHG的机器管理。

板材厚度：4 mm 滚筒体间距：260 mm 投影：500 mm 滚筒中心距：132 mm 安装：40 mm 速度：5 m/min 总功率要求：2.2+0.55 kW 机器重量约：450 kg 空间要求约：1800x700x1600 mm 设备： - 谐波可通过液压方式打开 和关闭- 3 套渗漏辊 - 脚开关 - 德国 - CE 标志/符合性声明上的 操作说明 ! !为您服务机器租赁长达60个月，无需首付，无残值， 个人建议和根据要求计算个人租赁费率。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。

table diameter: 715 mm table load: 500 kg Frontal Loading Center (A): 150 mm Side Loading Center (B): 150 mm Rotating speeds: 0,1 - 1 UpM T-slots: 6 x M16 Tilt Angle: 90-180-110 ° Tilting Speed: 30 sn min./90° weight of the machine ca.: 675 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm weight: 1265 kg dimensions: 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

板材厚度：2.5毫米 投影：260毫米 卷筒中心距离：92毫米 重量：295公斤 尺寸 L-W-H：1.2 x 0.7 x 1.2毫米 设备： - 3套滚筒 - 电动串珠机 - 脚踏开关 - 德国 - CE标志上的操作说明/符合性声明 本广告是用ModulMWS创建的 - LogoTech oHG的机器管理。

sheet width: 3100 mm plate thickness: 10 mm pre-bending: 8 mm upper roll diameter: 270 mm lower roll diameter: 250 mm side roll diameter: 210 mm total power requirement: 11 kW weight of the machine ca.: 7750 kg Overall size: 5600x1450x1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 6 mm pre-bending: 5 mm upper roll diameter: 200 mm min. bending diameter: Ø 300 mm bending speed: 5 m/min total power requirement: 5,5 kW weight of the machine ca.: 4.000 kg dimensions of the machine ca.: 4800x1300x1270 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.