编号 : 7371 型号:WMC2-4030 制片人: Flow 创建时间:2007 参数: 运行时间:21000小时 工作台长度: 4000 mm 工作台宽度: 3000 mm 切割头:Paser ECL 设备: 磨料点胶系统 供水 冶金材料(10吨) 新控制台搁板 备件 备用高压泵 (37 kW) 2017年:新
水切割机 FLOW WMC2-DWJ3 型号:流量WMC2-DWJ 3020-SCC-2P-DCF-LP-1xUP-100iD 建设年份: 2006 工作区域:2,000 x 3,000 mm, 泵: 6000 bar 2 个带角度校正的切割头。 数字驱动系统, 动态水射流轴系统, 带有快速释放装置的切割头的精确安装, PaserShield, FLOW喷磨切割系统PASER® – 动态水射流版本, FLOW喷头磨料 PASER ECL Plus, FLOW磨料加药系统PASER,FLOW磨料储存和输送系统PASER, FLOW WaterVeyor 磨料污泥清除系统、出丝助剂 FLOW UltraPierce、 和更多。 机器规格 总工件支撑: X轴:约3,100毫米桥 Y 轴:约 2,100 mm 基轴 带一个切割头的净切割面: X轴:3,000 mm 桥 Y 轴:2,000 mm 基轴 带两个切割头的净切割面(从): X轴: 2,600 mm Y 轴:2,000 mm Z轴最大行程:约200mm 最大工件高度: ...
品牌:流量 出厂年份: 2014 型号: 马赫4 4060 XD 生产时间:780 应用类型:水切割 位置: 法国 机器类型:水射流切割机 可用性:立即 技术资料 控制单元 品牌:流量 主驱动器 轴数:5 附加信息 机器优势 机器技术优势: - 工作表面 4000X6000 MM - 动态水刀 XD 3D 切割和倒角可达 55 - 流量泵超喷气发动机 94I-D 75 KW 5L/MN - 公称压力 6500 BAR - 工作压力 6000 BAR - 切割头流滤嘴 4 - 2聚焦加农炮 - 2 个金刚石喷嘴 - 磨料进料和配料系统 - 2 软件许可证流
品牌:流量 年份: 2007 型号: WMC2 4030 生产时间:4247 应用类型:水切割 位置: 捷克共和国 机器类型:水射流切割机 可用性:立即 技术信息 控制单元 品牌:流量 型号: 流霸 6.0 运动 X 轴运动:4000 MM Y 轴运动:3000 MM 媒体 泵驱动功率:4150 附加设备 - 研磨材料 5吨 - 备用高压泵 37 KW -备件 - 悬臂架 附加信息 机器历史 材料类型:塑料,钢 机器优势 技术机器优势: - 水处理系统 - 磨料斗 - 包括ADS(磨料输送系统) - 帕瑟ECL切割头 - 流量加元 6.0 软件 - 流程大师 6.0 软件 - 包括机架系统 定性机器优势: - 定期保养,状况非常好! - 2016年安装新
品牌: FLOW 年份: 2013 型号: MACH3 4020B 应用类型:水切割 位置: 西班牙 机器类型:水射流切割机 可用性:立即 技术信息 控制单元 品牌: FLOW 其他信息 机器优势 技术机器优势: - 切割面积 = 4000 X 2000 MM - FLOW PASER ECL PLUS 切割头 - ECL铠混合管 - HYPLEX 混合型 30D 高压泵 - 4,150 BAR |3. 1 升/分钟 |30CV型 定性机器优势: - 它包括一个双工作区,1。每个 5X2 带有单独的安全屏障,用于在一个区域装卸,而机器 另一个区域操作
品牌: FLOW 年份: 2021 型号: MACH 200-400 制作小时数:170 应用类型:水切割 位置: 奥地利 机器类型:水射流切割机 可用性:立即 技术信息 控制单元 品牌: FLOW 主驱动器 轴数:5 其他信息 机器优势 技术机器优势: - Z轴:PIVOT+ - Z轴数量:1 - 切割面积:4. 0 X 2。0 (米) - 泵:50HP 增压器 60K (ULTRAJET 60IS) - 散热:水-空气冷却器 - 捕手:涂漆低碳钢 - 软件:1X FLOWXPERT 1X FLOW MASTER (FLOWCUT + FLOWPATH) - 另外:1X ULTRA PIERCE 1X EKOWA 水处理系统 - 3D头部 定性机器优势: - 2022年3月机器调
品牌:流量 年份: 2003 型号: WMC 2 4020 马赫 4 生产时间:6580 应用类型:水切割 地点: 德国 机器类型:水射流切割机 可用性:立即 GINDUMAC ID: DE-WAT-FLO-2003-00001 技术信息 一般数据 测量宽度: 4000 MM 测量深度: 2000 MM 附加信息 机器优势 技术机器优势: - 78000 PSI 泵 75KW - 包括流大师 6 的流软件 - 两个头 - 一个已安装 + 即用型,一个作为备件提供
x-travel: 3000 mm y-travel: 4000 mm z-travel: 640 mm Control: Siemens Sinumerik 840D table-size: 3000 x 4000 mm swivelling +/-: 57 Grad traversing speed: x-axis: 20000 mm/min y-axis: 20000 mm/min z-axis: 12000 mm/min positioning accuracy: +/-0,1 mm/m repeating accuracy: +/-0,025 mm total power requirement: 15 kW weight of the machine ca.: 4 t equipped with: - CNC Siemens control Sinumerik 840D,Handwheel and Siemens SIMATIC S7-300 and SIMODRIVE 611, 1GB HHD Drive - Machine works with 2D cutting head - High pressure translator pump model 20 XD -55 (415Mpa, 75KW) - Paser 3 abrasive blast cutting system - Water softening dosing system - height sensor and collision monitoring for the 2D head, - Pneumatic tool clamping New X-axis spindles in 2017 New table support system 2017, Abrasive desludging system & new grease lubrication system 2017 Operating hours approx. 16700h dismantled and stored ...
This Flow MACH4 4060 XD Waterjet Cutting machine was manufactured in the year 2014. It is equipped with a Flow control unit and has 5 axis. The machine has a working pressure of 6000 bar.
This Flow Mach3 4020B Waterjet cutting machine was manufactured in the year 2013 in the United States. It is equipped with a Flow control unit. The machine has a cutting area of 4000 x 2000 mm.
This Flow Mach 200-400 Waterjet cutting machine was manufactured in the year 2021 in the United States and has 170 production hours. It is equipped with a Flow control unit. The machine has a cutting area of 4.0 x 2.0 m.
This Flow WMC2 4030 Waterjet Cutting Machine was manufactured in the year 2007 in United States. It is operated with a FlowMaster 6.0 control unit and it counts with a pump drive power of 4150 bar. It also has a new pump installed in 2016 and it comes with a water treatment system and an abrasive material hopper.
Number of Hours: 10000 h; Cutting area: 3000 x 2000mm; Z-axis travel: 150 mm/ 178 mm; Linear accuracy: 0.038 mm by 1 m; Repeatability: 0.050mm; Cutting speed: 7.6 m/min; Travel speed: 12.7 m/min; Equipment: DYNAMIC Waterjet XD cutting head Hyperjet pump 94IS 65000 bar 5-axis head +/- 60° Steel deck
4.7L high pressure pump Table catcher: 4000/2000/700 - 4 lease drain bins Qualicot grid Abrasive pulser 1996 / 16000h CNC: NUM 720 (worked with a buried rainwater tank)
Metal length x width : 3000 mm x 2000 mm Operating pressure : 4000 Bar The machine includes: x, y, z axes, a cutting pool, an oil cooler pump, an electric cabinet with a special computer with WinXP and Flowcut and FlowCNC software, protective barriers and a sand addition system. Some spare parts , all documents come with machine
Pressure atmospheric maximum: 4000 bar X - axis: 3000 mm Y - axis: 2000 mm Sheet thickness: 0,00 mm Number cutting heads: 0 CNC Brand: _Unknown / Other CNC Model: Flowcut FLOW - MACH3 3020B CNC Waterjet 3000 x 2000 x 4000 Bar MACH - ID 6372 Make: FLOW Type: MACH3 3020B Control: FLOWCUT YOP: 2013 Hours: 3000 Working area X Axis 3.000 mm Working area Y Axis 2.000 mm Working area Z axis 178 mm Power resonator 4000 bar kW / Amp Feed rate X-Axis 12.700 mm Feed rate Y-Axis 12.700 mm Feed rate Z-Axis 12.700 mm Control FLOWCUT Cutting hours 3000 H Linbear straightness a ...