| 描述: |
? ? ? ? ? ? ?427?
二手机
Valley. Crank shears with an inclined blade for a sheet of 20x2000 mm,
model NLZ427B, are designed for cutting sheet metal with a thickness
of up to 20 mm and a tensile strength of S 500 MPa.
Scissors can be used in the procurement workshops of metal structures,
machine-building enterprises, repair and other plants, when used in
climatic zones with a temperate and cold climate
version UHL, dry and humid tropical - version O; placement category 4
according to GOST 15150 - 69
The lower value of the air temperature must be at least +5 0С.
Designed for cutting metal up to 20mm thick
1. Maximum cutting force, kN 1000
2. The largest dimensions of the metal being cut with temporary
3. resistance <500 MPa, mm
4. thickness 3-20
5. width 2000
6. Distance from the cutting edge of the fixed knife to the bed
(outreach), mm: Without overhang
7. Frequency of knife strokes, min:
8. single, not less than 30
9. when cutting the largest dimensions of the cut
10. metal, no more than 6
11. The angle of inclination of the movable knife 2g50min
12. The greatest length of the cut strip during operation
13. with back stop, mm 1000
14. The smallest length of the cut strip when working with
15. back stop, mm 30
16. Dimensions, E561673 mm
17. length 2960
18. width 2250
19. height 2260
20. Weight, kg 9050
21. Kind of current: variable three-phase
22. Current frequency, Hz 50
23. Circuit voltage, V
24. power, 380
25. control, 110AC, 24DC
26. Alarm, 22(AC)
27. cutting line lighting, 220V(AC)
28. Number of points of illumination of the cutting line 1
29. Management: pedal, push-button
30. Main drive motor:
type 5AI200 M2UZ
power, kW 37
31. Operating mode of the electrical circuit: single stroke, manual
cranking.
seller offer No. resale P230726011
|