板材宽度:2600 mm片材厚度:10.0 mm弯曲:8.0 mm顶卷直径:230 mm侧卷直径:190 mm子卷直径:210 mm总功率要求:7.5 kW机器重量约:5,560 kg。尺寸 L-W-H: 4.650x1.380x1.300 mm 设备:- 液压-4 辊圆折弯机- 锥形弯曲装置- 感应淬火辊- 两个侧辊的数字显示- 移动控制面板- 2 种速度- 液压折叠轴承- 德国- CE 标志上的操作说明 / 符合性声明本广告的数据是使用 ModulMWS 创建的 - LogoTech 的机器管理呵呵
板材宽度:3100 mm板材厚度:13.0 mm弯曲:10.0 mm顶卷直径:300 mm侧卷直径:210 mm子卷直径:270 mm总功率要求:11.0 kW设备:- hydr.-4辊 圆折弯机- 锥形弯曲装置- 感应淬火辊- 两侧辊的数字显示屏- 移动控制面板- 2 速- 液压-折叠轴承- CE - Mark /符合性声明 - 床。说明此广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理
sheet width: 3100 mmplate thickness: 50 mmpre-bending: 40 mmtotal power requirement: kWweight of the machine ca.: 40 tdimensions of the machine ca.: 6,7 x 3,0 x 3,0 m4-ROLL Hydraulic Plate Rolling MachineWorking length 3100 mmMaximum thickness Pre-bending 40 mmBending 50 mmYield Point: 240 N/mm2Number of rolls 4Motor Power 55 kWMin. diameter mm - Ø Top Roll Diameter x 3Top roll Ø 540 mmBottom roll Ø 510 mmSide roll Ø 440 mmLength 6700 mmHeight 3000 mmWidth 3000 mmWeight 40.000 kgWith:Cone bending deviceInduction hardened rollsDigital readout for side rollsFully welded steel (St-52) frameSeparate moveable control panelDual bending speedsElectronic ParallelismAll rolls are mounted in spherical roller bearingsHydraulically opened/closed drop end controlled from control panelActivation of cone rolling function and position adjustment via buttons onthe control panelCentral rolls ...
阿耶尔科技圆折弯机 类型 1030 x 100 - 卡帕西蒂特 1030 x 3 毫米 - 卷筒直径 100 mm - 科尼施·瓦尔森 - 韦格德拉伊巴雷波文罗尔 - 雷姆莫托 - 沃特贝丁 - 面条 - 重量 600 公斤 - 400V 价格不含增值税。 荷兰马赫 金属加工机械 恩斯赫德 - 荷兰 (距离德国边境3公里
阿耶尔科技圆折弯机 类型 1270 x 130 - 卡帕西蒂特 1270 x 3 毫米 - 卷筒直径 100 mm - 科尼施·瓦尔森 - 韦格德拉伊巴雷波文罗尔 - 雷姆莫托 - 沃特贝丁 - 面条 - 重量 650 公斤 - 400V 价格不含增值税。 荷兰马赫 金属加工机械 恩斯赫德 - 荷兰 (距离德国边境3公里
阿耶尔科技圆折弯机 类型 3R HMD 1270 x 90 - 液压可调的阿赫特罗 - 3卷 - 数字用户界面 - 格哈德卷 - 科尼施·瓦尔森 - 韦格德拉伊巴雷波文罗尔 - 雷姆莫托 - 沃特贝丁 - 面条 - 纪录片 - 400V 荷兰马赫 金属加工机械 恩斯赫德 - 荷兰 (距离德国边境3公里
阿耶尔科技圆折弯机 型号 IR 1050 x 46 - 卡帕西蒂特 1050 x 0.8 毫米 - 科尼施·瓦尔森 - 韦格德拉伊巴雷波文罗尔 - 雷姆莫托 - 沃特贝丁 - 面条 - 400V 荷兰马赫 金属加工机械 恩斯赫德 - 荷兰 (距离德国边境3公里
阿耶尔科技圆折弯机 类型 IRM 1270 X 140 - 卡帕西蒂特 1270 x 5 毫米 - 电动可调船尾 - 数字用户界面 - 格哈德卷 - 科尼施·瓦尔森 - 韦格德拉伊巴雷波文罗尔 - 雷姆莫托 - 沃特贝丁 - 面条 - 纪录片 - 400V 荷兰马赫 金属加工机械 恩斯赫德 - 荷兰 (距离德国边境3公里
阿耶尔科技圆折弯机 型号 PWE 1080 x 100 - 卡帕西蒂特 1080 x 3 毫米 - 卷筒直径 100 mm - 科尼施·瓦尔森 - 韦格德拉伊巴雷波文罗尔 - 雷姆莫托 - 沃特贝丁 - 面条 - 重量 600 公斤 - 400V 价格不含增值税。 荷兰马赫 金属加工机械 恩斯赫德 - 荷兰 (距离德国边境3公里
阿耶尔科技圆折弯机 型号 RM 1050 x 90 - 卡帕西蒂特 1050 x 3 毫米 - 科尼施·瓦尔森 - 韦格德拉伊巴雷波文罗尔 - 雷姆莫托 - 沃特贝丁 - 面条 - 纪录片 - 400V 荷兰马赫 金属加工机械 恩斯赫德 - 荷兰 (距离德国边境3公里
阿耶尔科技圆折弯机 型号 RM 1270 x 90 - 卡帕西蒂特 1270 x 2.5 毫米 - 科尼施·瓦尔森 - 韦格德拉伊巴雷波文罗尔 - 雷姆莫托 - 沃特贝丁 - 面条 - 纪录片 - 400V 荷兰马赫 金属加工机械 恩斯赫德 - 荷兰 (距离德国边境3公里
卷筒长度: 1250 mm 最大板材厚度: 1.25 mm 卷筒直径: 60 毫米 长: 1780毫米 深度: 550 mm 高度: 1030 mm 重量: 约 230 公斤 价格是净,加上增值税,免费的房子1地址德国(没有 岛屿)
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD total power requirement: 11 kWweight of the machine ca.: 4,450 tdimensions of the machine ca.: 3830 x 1160 x 1180 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 24mm total power requirement: 45+22 kWweight of the machine ca.: 43 tdimensions of the machine ca.: 6684 x 2280 x 2375mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 4mm total power requirement: 5,5 kWweight of the machine ca.: 2920 tdimensions of the machine ca.: 3600 x 970 x 1140mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 6 total power requirement: 7,5 kWweight of the machine ca.: 4,340 tdimensions of the machine ca.: 3830 x 1160 x 1180mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD total power requirement: 11 kWweight of the machine ca.: 4,570 tdimensions of the machine ca.: 3830 x 1160 x 1180mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD total power requirement: 15 kWweight of the machine ca.: 8 tdimensions of the machine ca.: 4260 x 1160 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD total power requirement: 18,5 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: 4260 x 1660 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD 0: 20mm (s) Ampullen/h0: mm0: mmtotal power requirement: 22 kWweight of the machine ca.: 9,2 tdimensions of the machine ca.: 4260 x 1660 x 1590 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 25mm (s) total power requirement: 30 kWweight of the machine ca.: 13950kg tdimensions of the machine ca.: 4510 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 30mm (S) total power requirement: 37 kWweight of the machine ca.: 15,3 tdimensions of the machine ca.: 4510 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 13 total power requirement: 15 kWweight of the machine ca.: 8,84 tdimensions of the machine ca.: 4760 x 1660 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 16mm total power requirement: 18,5 kWweight of the machine ca.: 9,6 tdimensions of the machine ca.: 4760 x 1660 x 1140mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 25mm total power requirement: 30 kWweight of the machine ca.: 15,15 tdimensions of the machine ca.: 5010 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 6mm total power requirement: 11 kWweight of the machine ca.: 5,8 tdimensions of the machine ca.: 4880 x 1160 x 1180mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 8mm total power requirement: 15 kWweight of the machine ca.: 9,7 tdimensions of the machine ca.: 5310 x 1660 x 1590 mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 10mm total power requirement: 15 kWweight of the machine ca.: 10,6 tdimensions of the machine ca.: 5310 x 1660 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 16mm total power requirement: 22 kWweight of the machine ca.: 16,65 tdimensions of the machine ca.: 5560 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 20mm total power requirement: 30 kWweight of the machine ca.: 18,3 tdimensions of the machine ca.: 5560 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 25mm total power requirement: 37 kWweight of the machine ca.: 20,5 tdimensions of the machine ca.: 5560 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 35mm total power requirement: 45+22 kWweight of the machine ca.: 35 tdimensions of the machine ca.: 5684 x 2280 x 2375mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 40mm total power requirement: 2x37+30 kWweight of the machine ca.: 45 tdimensions of the machine ca.: 6085 x 2630 x 2787mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 50mm total power requirement: 45+45 kWweight of the machine ca.: 72 tdimensions of the machine ca.: 6370 x 3240 x 3660mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 8mm total power requirement: 15 kWweight of the machine ca.: 14,1 tdimensions of the machine ca.: 6310 x 1660 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 13mm total power requirement: 22 kWweight of the machine ca.: 21,3 tdimensions of the machine ca.: 6560 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 16 total power requirement: 37 kWweight of the machine ca.: 23,81 tdimensions of the machine ca.: 6560 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 20mm total power requirement: 37+22 kWweight of the machine ca.: 39 tdimensions of the machine ca.: 6684 x 2280 x 2375mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3000 mmplate thickness: 70 mmpre-bending: roll diameter: 660 mmtotal power requirement: kWweight of the machine ca.: 63 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Description: Roll length 3050 mm Roll diameter 210 mm Crunching thickness 4 mm Roll thickness 6 mm Motor power 7.5 kW Rollers driven by independent hydraulic geared motors. Digital indicators to monitor the position of the crunching rollers. Cone setting device for the crunching rollers. Automatic hydraulic synchronisation of roller parallelism. Hydraulic opening head. Heat treatment of cylinders. Hydraulic roller diverterweight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 4,700 x 1,700 x 1,500 mm
板材宽度:1050 mm板材厚度:1.50 mm卷长:1050 mm卷直径 - 顶部:68.0 mm电机功率:手动 kW重量:280 kg尺寸 L-W-H:1930 x 700 x 1160 mm设备:- 手动不对称 3 辊圆折弯机带手动驱动- 手动折叠轴承- 手动送入后辊轮廓槽:4/6/10 mm该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理
板材宽度:1270 mm板材厚度:1.50 mm卷长:1270 mm卷直径 - 顶部:75.0 mm电机功率:手动 kW重量:330 kg尺寸 L-W-H:2150 x 700 x 1160 mm设备:- 手动不对称 3 辊圆折弯机带手动驱动- 手动折叠轴承- 手动送入后滚子轮廓槽:4/6/10 mm该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理
板材宽度:1270 mm板材厚度:2.5 mm卷长:1270 mm卷直径 - 顶部:90.0 mm电机功率:1.1 kW弯曲速度:6.0 m/min重量:520 kg设备:- 电机驱动的不对称 3 辊圆折弯机- 淬硬滚子- 用于快速拆卸工件的手动折叠轴承 - 轮廓进气口,即径重子滚子 - 用于 R/L 运行和紧急的双脚开关 从按钮锥形弯曲装置- 后滚轮可手动调节 - 电气。安全装置 此广告的数据是使用ModulMWS创建的 - 标识科技oHG的机器管理
板材宽度:1550 mm板材厚度:2.0 mm卷长:1550 mm卷直径 - 顶部:90.0 mm电机功率:手动 kW重量:560 kg尺寸 L-W-H:2580 x 700 x 1250 mm设备:- 手动不对称 3 辊圆弯机带手动驱动- 手动折叠轴承- 手动送料后滚子轮廓槽:4/6/9 mm该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理
弯曲长度: 1540 mm 板材厚度: 1.5 毫米钢 滚筒直径: 80 mm 电动后滚轮衬里,带自动关闭功能 通过脚踏开关顺时针和逆时针旋转 3辊驱动 安全拉绳开关 可以进行圆锥形舍
最大弯曲长度: 2040 mm 最大板材厚度:1.25毫米钢 通过脚踏开关顺时针和逆时针旋转 3辊驱动 安全拉动开关 锥形圆锥
规格: 卷筒长度 2040 mm 弯曲能力 6 mm at 450 N/mm² 弯曲能力约为弯曲能力的 80% 上卷直径 170 mm 后卷直径 170 mm 下卷直径 165 mm
Description: for edgesweight approx.: 35 kg, Approx. Onsite Dimension. (l x w x h): 460 x 580 x 420 mm
Description: sheet thickness (Mild Steel) 0.5 – 1.5 mm flange height with standard forming rolls 6 – 15 mm flange height with automatic material guiding system 8 mm or 10 mm minimum inside radius (for a 90 degree segment) 100 mm minimum inside radius (for a 180 degree segment) 130 mm speed 0 – 9.4 m/min power 2,2 kW voltage-frequency 230 VAC / 50 – 60 Hz / 1Ph+N+PE current : 10A mat. thickness when pre-bending when rounding: 1.5 mm, number of rolls: 2, total power requirement: 2.2 kW, weight approx.: 165 kg, Approx. Onsite Dimension. (l x w x h): 570 x 620 x 1,100 mm
Description: SPECIFICATIONS Character: Goyar Type: IE-40/25 Machine weight: 38,500 kg Mechanical: Yes Roller length: 2,500 mm Sheet thickness: 50 mm Number of rolls: 3 Upper roller diameter: ø530 mm Bending capacity: 40 mm Rolling speed: 4 m/min Electrically driven: Yes Power of main motor: 70 kWweight approx.: 38,500 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 7,000 x 3,100 mm