二手 DARLEY 出售

起重量：150吨 弯曲长度： 3,600 mm 支架宽度： 3,100 mm 后料： 600 mm 行程长度： 240 mm 投影： 400 mm 控制：Delem 52 配备： - 1套折弯工具 - 手/脚控制 原产地：荷兰 电机功率： 11 kW 机器长x宽x高：3750 x 1500 x 2900 mm 机器重量： 14.500 kg

Darley EHP 200 折弯机 制造商： Darley 型号： EHP 200 31/25 制造年份： 1990 控制系统：Delem 技术规格 有效长度： 3100 mm 起重量： 200 t 立柱间距： 2550 mm 主电机功率：15kW 尺寸：约 L 3.3 x W 1.7 x H 2.5 m 重量： 约 9 t 辅料 机器的文档 一套工�

工作宽度： 4100 mm 片材厚度： 6 毫米 投影： 100 mm 后挡风量： 0 - 1000 mm 驱动功率：18.5 kW 空间要求：4600 x 2200 x 1950 mm 重量： 11000 kg

3100 x 110t。

3100 x 6 毫米 年。1992

Description: CNC press brake folding long 4300 mm between steander 3700 mm max. pressure 300 tons Power 33.5 kW stroke 300 mm Projection upright 400 mm DELEM DA-65W control system CNC crowning Hydraulic tool clamping no tools weight approx.: 21,500 kg, Approx. Onsite Dimension. (l x w x h): 5,200 x 2,200 x 3,600 mm

板材宽度：3100 mm 板材厚度：20 mm 支架宽度：mm 总功率要求：kW 机器重量约：t 空间要求约：m 轴承数2110009 机器类型 面板剪切机 使达利 型 GS 3100/20 建造年份 1987 控制型 带电停止 板宽度 3100 mm 板材厚度 20 mm 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。

sheet width: 3700 mm plate thickness: 16 mm distance between columns: 3860 mm throat: 100 mm back stop - adjustable: mm down holder: 12 Stk. total force of the downholder: 24000 kg oil volume: ca. 500 l total power requirement: 30 kW weight of the machine ca.: ca. 11,0 t dimensions of the machine ca.: 4,5 x 2,5 x 2,5 m Max. Sheet thickness stainless steel: 12mm Cut gap adjustment: 0-16 mm - Machine has a back gauge adjustable from the front. - cut line lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 t chamfer lenght: 3200 mm distance between columns: 2740 mm stroke: 400 mm Center of spindle to wall or column: 420 mm dayligth: 650 mm engine output: 32,5 kW oil volume: 350 l Control: total power requirement: kW weight of the machine ca.: 20 t dimensions of the machine ca.: 4,75 x 2,80 x 3,60 m Only 5406.9 operating hours read • Delem DA-65W control • LazerSafe light barrier • Controlled axes: Y1, Y2, X, X1 (oblique), Z1, Z2 • 2 x support arms with parking position on the side • CNC controlled crowning • Hydraulic tool clamping at top + bottom • Extensive tool set, with very large dies for machines / steel construction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50,0 t chamfer lenght: 2050 mm distance between columns: 1550 mm dayligth: 320 mm stroke: 120 mm ajustment speed: 100 mm/sec working feed: 10,0 mm/sec return speed: 75,0 mm/sec column arm: 250 mm work height max.: 900 mm table width: 100 mm connected load: 7,2 kW oil volume: 90 ltr. weight: 2600 kg range L-W-H: 2250 x 1100 x 2050 mm Furnishing: - DELEM CNC control model DA 24e - swiveling control panel - electrical backgauge (X axis) - 2x manually adjustable stop fingers lateral + vertical adjustment (R + Z axis) - 2x front support arms - SICK light barrier in front - 2 hand / foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 t chamfer lenght: 3100 mm distance between columns: 2550 mm column arm: 250 mm dayligth: 375 mm stroke: 150 mm ajustment speed: 100 mm/sec working feed: 8.0 mm/sec return speed: 65.0 mm/sec table width: 160 mm work height max.: 900 mm oil volume: 130 ltr. total power requirement: 7.5 kW weight of the machine ca.: 8700 kg range L-W-H: 3220 x 1290 x 2550 mm well maintained / good condition () Furnishing: - electro-hydraulic CNC press brake - DELEM CNC control - model DA 58 Swivel control panel, front left 2D graphical programming & product display Tool & program library - CNC axis adjustment Y1 - Y2 - X axis - CNC electro-motorized back gauge incl. 2x manually adjustable stop fingers (R+Z axis) - manual table cambering, adjustment via hand crank including analogue value display - 1x split pointed upper tool (manufacturer UKB) - 1x universal rotating Multi-V die block i ...

Working length: 4300mm, pressing force: 2000kN, connected load: 15kW, weight: 18t, including tools.

Cutting length: 1250mm, table height: 830mm, connected load: 22kW, length: 1900mm, width: 2200mm, height: 1900mm, weight: 9.6t, with documentation, without spare parts.

Working width: 3050mm, max. cutting capacity: 19mm, length: 3720mm, width: 2460mm, height: 2507mm, weight: 18t.

Working width: 3050mm, max. cutting capacity: 9mm, length: 3500mm, width: 2500mm, height: 2000mm, weight: 10t.

Working width: 3050mm, max. cutting capacity: 19mm, length: 3720mm, width: 2460mm, height: 2507mm, weight: 18t.

Hydraulic press brake prod. by Darley Holland, type EHP 150.36/31 rb. 1996. Pressure 150 t, working length 3600 mm, Between sides 3150 mm. Loading 350 mm. Stroke 240 mm. CNC Delem DA58 control, controlled axes; Y1-Y2-X-R. CNC table deflection arrow compensation. Stamp mounting - Wila. Multi-groove die 110x110 mm with the largest groove V=90 mm. Installed power 12,7 kW, machine weight 12000 kg. Simple and powerful press brake for heavy processing-bending of thick metal sheets in 3 shifts. Full technical documentation DTR, safety instructions in Polish.

Hydraulic guillotine for cutting sheet metal from Darley the Netherlands, type GS 3000-10, 3050 mm x 10 mm (ST40). The machine has a variable knife gap and a constant knife angle of 1.5 degrees. 18 kW engine. Machine weight 9 tons. Electric bumper - bumper departure 950 mm. Electrically adjustable cutting length in the range of 10-3050 mm. A machine with very small external dimensions. A support for holding sheets of metal at the front of the machine, plus a ruler for cutting at a 90-degree angle. Original O&M documentation and occupational health and safety manual in Polish. The machine is designed for continuous operation - 3 shifts.

Capacity 3100 x 10 mm Delem DAC 350 control good condition inspection possible

Pressure 110 t, working length 3100 mm, between sides 2650 mm. Loading depth 250 mm. Stroke 150 mm. Delem DA42 CNC control, controlled axes; Y1-Y2-X+ hydraulic tool clamping Installed power 7.5 kW, machine weight 7000 kg. Full technical documentation, OHS manual in Polish.

The machine is in good technical condition, inspection possible upon agreement. Specifications: Max. bending length 4300 mm Distance between columns 3700 mm Max. pressing force 300 T Dis. Beam - Table 485 mm Beam stroke 300 mm. Dimensions (Estimate) Length 5200 mm Width 2200 mm Height 3600 mm Weight 21500 kg

Delem CNC control (DA65w) Y1, Y2, X and R axis CNC controlled CNC crowning Hydraulic WILA NS top clamping Laser system front (bridged) 1 set of complete tools incl.

Capacity 4300 x 230 tons Delem DA 66W CNC control CNC Bombing Y1, Y2, X1, X2, R1, R2, Z1 and Z2 axis CNC controlled Hydraulic Wila New Standard top and bottom clamping

Darley GS 1100x20 guillotine, cutting length 1100 mm, sheet thickness up to 20 mm. The machine is fully operational, an additional set of knives.

Hydraulic press brake prod. by Darley Holland, type EHP 50 25/20 rb. 1986. Pressure 50 t, working length 2500 mm, Between sides 2650 mm. Loading depth 250 mm. Stroke 150 mm. CNC Delem DA42 control, controlled axes; Y1-Y2-X. Installed power 5.5 kW, machine weight 4000 kg. Full technical documentation DTR, safety instruction in Polish.

片材厚度： 8，00 毫米 空隙： 0 工作台长度： 6000 毫米 工作台宽度： 0 毫米 刀长： 0 毫米 MACH-id  3449 让 达利荷兰 类型   GS 6000 x 8 毫米 1989年   规格 Controll   Conventionel 断头台 / 拉泽尔 / 切割台   断头台 切割长度   6000 mm 最大板材厚度   8 mm 后挡风量程 X 毫米   1000 毫米 尺寸 长度   6800 mm 宽度  3500 mm 高度  2700 mm  

Capacity: 340 t Folding length: 6200 mm CNC Brand: Delem CNC Model: DA 42 MACH-id   3446 MAKE   Darley Holland TYPE   EHP 340 / 62/51 YEAR   1989 SPECIFICATIONS   Controll   Delem DA 42 Pressbrake / Folding / Mech. / Hydr.  Pressbrake   Hydraulic / Mechanical   Hydraulic Bending length   6200 mm Distance between column   5100 mm Press force   340 Ton Throat   350 mm Stroke   250 mm Die height   500 mm Backgauge stroke X in mm  1000 ? mm Number off controlled axis   4 Power 33.5 kW DIMENSIONS   Length   6400 mm Width   2075 mm Height   3680 + 1470 Ground mm  

Sheet thickness: 10,00 mm Sheet width: 2550 mm Depth rear gauge: 0 mm MACH-id      6014 MAKE           Darley Holland TYPE             GS 2500 / 10 YOP               1998 SPECIFICATIONS Maximum sheet thickness        10 mm Control          Delem DAC 350 DIMENSIONS Length          3000 mm Width            2200 mm Height           2000 mm Weight           8500 kg

板材厚度： 20，00 毫米 片宽度： 1100 毫米 深度后规： 0 毫米 使达利 20 毫米 GS 1100 x 20 型 1975年 达利沙尔 液压断头台 剪 板材厚度（毫米） T = 20 毫米 板材宽度（毫米） L = 1100 mm 深度后规 （mm） 1000 mm 功率 22 kW 重量 6000 Kg 前挡块 1500 mm 克尼普沙尔普拉查尔煤布利希剪刀  

Capacity: 80 t Folding length: 2550 mm CNC Brand: Delem CNC Model: DA 23 MACH-id     5558 MAKE          Darley Holland          TYPE            EHP 80 25/20 YOP              1991 SPECIFICATIONS Max. bending length         2550 mm Distance between column       2050 mm Max. pressing force        80 T Dis. Beam - Table           410 mm Beam stroke                     225 mm Table Width                      160 mm Troth beam                       400 mm Approch speed    ...

容量：340 t 折叠长度：4300毫米 数控品牌：德莱姆 数控型号：DA 24 E 制造达利EHP 34 型号 EHP 340 43/31 1996年 CNC Abkantpresse Presske kantbank plooibank 容量（公吨） 力 = 340 T 折叠长度（毫米） L = 4.300 下行程或上行程 H = 3.100 串联式德莱姆 DA 24 E Y1/Y2/X/R1/R2/V 加冕 在客户的权力下！  

容量： 50 t 折叠长度： 2550 mm 数控 品牌： 德利 数控 型号： DA 65 使达利数控 50 T 型号 EHP 2550 / 50 1997年 达利 ehp kantbank 与 Delem DA 65 abkantpresse 容量（公吨） 50 折叠长度（毫米） 2550 下行程或上行程 串联式单体 特罗亚特 = 400 行程 = 150 模具高度 = 435 数控拆弹 DA 65 达利·坎特班克 达利·普雷斯布拉克 达利·阿布坎特普莱斯  

Capacity: 300 t Folding length: 4300 mm CNC Brand: Delem CNC Model: Delem DA65 Max. bending length:        4300mm Distance between column:    3700mm Max. pressing force:        300T Dis. Beam - Table:          485mm Beam stroke:                300mm Table Width:                250mm Troth beam:                 400mm Approch speed:              80mm/min. Working speed:              10mm/min. Return speed:               80mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis:  5 Crowning:                  &n ...

Sheet thickness: 13,00 mm void: 0 Table length: 3100 mm Table width: 0 mm Knife length: 3100 mm MACH-id      5423 MAKE           Darley Holland TYPE             GS 3100 x 13 YOP               1993 SPECIFICATIONS Maximum sheet thickness       13 mm Max. cutting length          3100 mm Strokes on full length         18 mm Cutting angle       2 ° Length backgauge          1000 mm Power         22 kW DIMENSIONS Length         3560 mm Width          2350 mm Height         1990 mm Weight        12200 kg

Sheet thickness: 16,00 mm void: 0 Table length: 0 mm Table width: 1250 mm Knife length: 0 mm MACH-id   3066 MAKE   Darley Holland TYPE    GS 1250 x 16 YEAR    1994 REV SPECIFICATIONS Controll       Conventionel    Guillotine Cutting lenght      1250 mm Maximum sheet thickness   16 mm Throat  100 mm Backgauge stroke X in mm   1000 mm Power resonator kW / Amp   22 kW DIMENSIONS Length 1850 mm Width  2600 mm Height  2200 mm  

Capacity: 150 t Folding length: 3100 mm CNC Brand: Delem CNC Model: DA 56 MACH-id     5081 MAKE          Darley Holland TYPE            EHP - L YOP              2000 SPECIFICATIONS Throat      250 mm Controll     Delem DA 56 Pressbrake / Folding / Mech. / Hydr.      Hydraulic Pressbrake Hydraulic / Mechanical        Hydraulic Bending length       3100 mm Distance between column       2500 mm Press force      150 Ton Stroke        175 mm Die height        400 mm Backgauge stroke X in mm       1000 mm Power        14 Kw DIMENSIONS  Length    ...

Capacity: 110 t Folding length: 3100 mm CNC Brand: Delem CNC Model: DA 56 MACH-id    5080 MAKE        Darley Holland TYPE          EHP - L YOP            2000 SPECIFICATIONS Throat      250 mm Controll     Delem DA 56 Pressbrake / Folding / Mech. / Hydr.      Hydraulic Pressbrake Hydraulic / Mechanical         Hydraulic Bending length         3100 mm Distance between column        2500 mm Press force        110 Ton Stroke          150 mm Die height       375 mm Backgauge stroke  X  in mm     1000 mm Power         7.5 Kw DIMENSIONS Length  ...

Capacity: 150 t Folding length: 4300 mm CNC Brand: Delem CNC Model: DA 23 MACH-id    5019 MAKE         Darley Holland TYPE           EHP 150 43 /37 YOP              1993 SPECIFICATIONS Controll        Delem DA 23 Pressbrake / Folding / Mech. / Hydr.       Pressbrake Hydraulic / Mechanical         Hydraulic Bending length      4300 mm Distance between column       3700 mm Press force      150 Ton Throat     300 mm Stroke         175 mm Die height         400 mm Backgauge stroke  X in mm      1000 mm Number off controlled axis         4  ...

Capacity: 50 t Folding length: 1550 mm CNC Brand: Delem CNC Model: DA 66 W MACH-id     4471 MAKE         Darley TYPE          EHP LS 50 . 15 CL YEAR         2010 SPECIFICATIONS Controll        Delem DA 66 W Pressbrake / Folding / Mech. / Hydr.     Pressbrake Hydraulic / Mechanical         Hydraulic Bending length          1550 mm Distance between column         1250 mm Press force         50 Ton Throat          400 mm Stroke           225 mm Die height       410 mm Backgauge stroke       X in mm       1000 mm Number off co ...