子类目
(三级类目)
生产厂家:
(品类: 106)
编号:4877: 1 格布尔。单柱液压机 法布尔。EITEL,类型 T 6.3,包吉。1973 ... 更多信息
产能:2500吨 滑块行程: 190 mm 滑块工作过程在其最底部位置之前的尺寸对应于标称 量:4.5 mm 每分钟的滑块课程数量: 20 工作台与滑块之间的最大距离(位于滑块的下部位置 :800 mm 工作台和滑块之间的距离调整:20 mm 表外形尺寸: - 从前到后:1400毫米 - 从左到右:1250毫米 锻造板厚度: 230 mm 工作台孔直径: 125 mm 前后滑块的尺寸:900 mm 下部除尘器行程长度:190 mm 底部推杆的力:75吨 栏杆间距: 950 mm 滑块中的推杆路线:15 mm 滑块中推杆的容量:25吨 每分钟允许的启动次数:10 机器外形尺寸 - 长度:3910毫米 - 宽度:3920毫米 - 高度:6220毫米 冲压重量: 97715 kg
压缩力:100 t 投影: 350 mm 工作台尺寸: 690 x 840 mm 表中腹泻: 160 mm 工作台调整: 挺杆面积: 450 x 600 mm 挺杆调节: 80 mm 行程调整: 8 - 100 mm 冲程速率:60次/分钟 驱动电机:380 V,5.5 kW 空间要求:1850 x 1850 x 2650 mm 重量: 6800 kg
压力:75t 工作台: 650 x 560 mm 柱塞面积: 500 x 300 mm 行程速度:50-250行程/分钟 提升高度:8-80 mm 最大安装高度: 400 mm 侧支架之间的通道: 300 毫米 馈线: 制造商: GSW 型号: WV32/80 带宽:最大320mm 胶带厚度:最大3.5mm 滚筒直径:80mm
容量250吨 最大柱塞行程结束时运动部件的动能 13,5 kj 最大滑枕行程 400 mm 冲压斯托克斯数量 (SPM) 34 滑动间隙 560 mm 滑枕尺寸(前背 560 mm 台面尺寸 670 x 750 mm 喷射器容量较低 16 吨 下部顶出器运动 105 mm 主驱动电机功率 15 kW 印刷机尺寸 3710 x 1925 x 4415 mm 压力机重量 18000 kg
pressure: 63 tthroat: 320 mmstroke: 8-100 mmno. of strokes: 120 Hub/minram - range of adjustment: 63 mmtable surface area: 860x620 mmram surface: 540x360 mmhole in the table: Ø 270 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5,5 tdimensions of the machine ca.: BxTxH 1500x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
投资编号 : 5698 型号: LKT 250 制片人:金属压榨机 创建时间: 1974, GO 2002 参数: 压缩力: 250 t 工作台长度: 1150 mm 台面顶部宽度: 1580 mm 最大行程速率顶表:7-25 1/min 滑块行程: 250 mm 调节柱塞: 100 mm 机器重量: 22950 kg GO 2002:转换为液压离合器 电子控
曲柄压力机扎梅赫PKRR 400A制造于1974年。 技术参数 : - 压力:400吨 - 支架间距:1020 mm - 冲压行程:315毫米 - 每分钟冲程数:20 - 滑块与工作台关闭的最大距离:742.5 mm - 滑块调整:250毫米 - 工作台尺寸:1020 x 1050 mm - 主发动机功率:40千瓦 - 主发动机转速:1500 1 /分钟。 - 压力机重量:40
pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive tool changing unit:2 x
pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive tool changing unit:2 x
pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive tool changing unit:2 x
pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive overload protection in ram:hydraulic ram adjustment:motoric tool changing unit:2 x
pressure:250 tthroat:450 mmstroke:36 - 126 mmno. of strokes:40 /mindistance table/ram, max. stroke up, adjustment up:525 mmtable surface area:1000 x 750 mmhole in the table:400 x 360 mmtable height over floor:1000 mmram surface:600 x 500 mmram adjustment:111 mmpower requirement:19,0 kWweight:13,5 tDimensions (WxDxH):1,3 x 3,2 x 3,35 mclutch:pneumatic overload protection in ram:mechanical ram adjustment:motoric
pressure:160 tthroat:690 mmstroke:8 - 180 mmno. of strokes:50 /mindistance table/ram, max. stroke up, adjustment up:500 mmtable surface area:1300 x 1000 mmhole in the table:400 / 120 mmtable height over floor:850 mmpassage to the back:900 mmram surface:1000 x 700 mmram adjustment:130 mmpower requirement:11,0 kWweight:19,0 tdimensions (WxDxH):2,4 x 2,8 x 3,4 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic ram adjustment:motoric ram counterbalance:pneumatic
pressure: 40 tthroat: 230 mmstroke: 8-88 mmthroat: 230 mmno. of strokes: 130 Hub/minram - range of adjustment: 63 mmtable surface area: 560x450 mmram surface: 250x200 mmhole in the table: Ø 190 mmtable height: 790 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 3,0 tdimensions of the machine ca.: 1000x1800x2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Kaiser, punching machine with gripper feed type PO 40 F -Pressure capacity: 55 tons -Stroke: adjustable from 9 to 60 mm -Stroke rate: 70-350 strokes/min -Table size: 590 x 410 mm -Table recess: 290 x 150 mm -Projection: 220 mm -Punching fixture: Ø 38 mm -Insertion height 335 mm -Dimensions: 1905/1540/H2940 mm -Weight: 3720 kg
印刷机经过全面翻新。工作范围:车身和盖板的清洁 重新喷漆、离合器轮盘衬的再生、新的气动安装、 的电气安装、新的控制(菲斯勒FMSC控制器、西门子 制面板、脚踏限位开关)、支脚的安装、新的用户手 册和记录的现代化历史。提供原始文档。 压力:25吨 麦克斯。冲程数/分钟: 125 滑块行程:8-60mm 滑块调节范围:55mm 重量: 1400 kg
CONTROLS PLC PNEUTRONIC PRESS DESIGN drive system: knuckle-joint frame design: H-frame, monoblock feedstock transport direction: left to right SLIDE total force (nominal): 250 to stroke: 61 mm stroke rate (max.): 60 /minCOUNTER RAM nominal force: 75 to stroke: 13 mmV-RING nominal force: 75 to stroke: 15 mmTOOL DIMENSIONS lower table (left-right): 540 mm lower table (front-back): 540 mm upper table (left-right): 540 mm upper table (front-back): 540 mm shut height max.: 320 mm ram adjustment: 145 mmSTRIP-FEEDER feeder type: roll feeder pilot release system: yes ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS   ...
pressure:120 tdistance between columns:430 mmstroke:125 mmdistance table/ram, stroke up:400 mmtable surface area:430 x 450 mmtable height over floor:860 mmside window:230 mmram surface:250 mmworking speed:10 mm/spower requirement:11,0 kWweight:2,5 tdimensions (WxDxH):1,6 x 1,3 x 2,4 mGerman Safety: permitted for manual loading:CE-sign
Pressure:800 tdistance between columns:2560 mmstroke:1050 mmDistance table/ram, stroke up:1870 mmTable surface area:2500 x 1730 mmpressure of drawing cushion in table:300 tDie cushion stroke in table:395 mmDie cushion area in table:2300 x 1300 mmRam surface:2500 x 1730 mmDie cushion pressure in ram:63 tDie cushion stroke in ram:150 mmSide window:1000 mmOil volume:4300 lPower capacity:200,0 kWDimensions (WxDxH):4,1 x 2,8 x 10,0 mHeight above floor:7,0 mdie cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable