制造商:AP&T Lagan 型号: FMC-2500 MC12 1010 工作台尺寸:下部:1000 x 1000 mm;上部: 800 x 800 mm (发送表:1000 x 800 毫米) 间隙: 1000 x 700 mm 行程: 500 mm 冲压力: 2500 kN - 250 吨 电压: 400 V 功率: 45 kW 液压油容量: ~1.000 l 重量: ~11.000 Kg 制造年份: 1992 运行时间: 19.470 h
制造商:AP&T Lagan 型号: FMC-2500 MC12 1010 S 工作台尺寸:下部:1000 x 1000 mm;上部: 800 x 800 mm (发送表:1000 x 800 毫米) 间隙: 1000 x 700 mm 行程: 500 mm 冲压力: 2500 kN - 250 t 电压: 400 V 功率: 45 kW 液压油容量: ~1.000 l 重量: ~11.000 Kg 制造年份: 1991 运行时间: 13.296 h 条件:未经测试,从工作工厂拆
额定压力...400吨 表尺寸...3100x1500毫米 柱塞尺寸 ...3290x1200毫米 最大冲程 ...460毫米 笔画数 ...10-25/分钟 控制法格...数控 8055 M 整机重量...115000公斤 机器状况良好,可以在带电下进行测试
Max. pressing force: 3.3 to, Approx. Onsite Dimension. (l x w x h): 470 x 700 x 1,500 mm, weight approx.: 200 kg, table surface area l x w : 280x 180 mm
Description: Maximum pressing force (downwards): 15,000 kN Maximum pressing force (upwards): 500 kN Maximum carriage travel: 1400 mm Working hours: 4500h approx Master cylinders: 2 (570/545 mm) Maximum distance between carriage and table: 2200 mm Minimum distance between carriage and table: 800 mm Front distance between columns: 5250 mm Lateral distance between columns: 1500 mm Lateral distance between piston rods: 1150 mm Dimensions of the mobile table (left / right x front / rear): 5000 x 2500 mm Dimensions of moving table (left / right x front / rear): 5000 x 2500 mm Approach speed of the carriage: 350 mm/s Adjustable working speed: 0 to 24 mm/s Maximum working speed at 1500t: 11.7 mm/s Return speed: 250 mm/s General characteristics of the lower slide Ram strength: 5000 kN Slide travel: 300 mm Slide travel area: 4350 x 1850 mm Pin spacing: 150x150 mm Number of ram pin slots: 308 piec ...
Description: Work table surface 340 × 270 mm, stroke approx. 690 mm, voltage 380 V, without additional accessories, without CEE certificateApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,800 mm, weight approx.: 160 kg
Description: Electric connection: 380VApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,000 mm, weight approx.: 1,000 kg
Description: Unused. Shrink range: 15-63mm Max opening: 75mm Voltage: 380V Wattage: 3000W Pressure: 535 Mpa Packing size: 780x540x1350 Weight Incl Packing: 280 KgApprox. Onsite Dimension. (l x w x h): 1,220 x 710 x 500 mm, weight approx.: 246 kg
Description: shrink range 15-63mm max opening 75mm pressure 53.5 Mpa force 500 T 3000W 380V 5585Approx. Onsite Dimension. (l x w x h): 770 x 530 x 1,320 mm, weight approx.: 280 kg
Description: Hydraulic operating pressure: 300 bar Voltage: 380 V, 50 Hz 3 phases 3 KVA Hydraulic oil: Mobil D.T.E 26 Oil: 76 liters Approx. Onsite Dimension. (l x w x h): 2,100 x 650 x 2,350 mm, weight approx.: 1,900 kg
2007年制造的EUROMET Y41-63T液压机设计用于加工金属板,型材和型材。EUROME T Y41 63T液压机具有抗任何变形的整体结构,结合63吨的压 压力,可以在中大型批量生产中实现出色的精度和加 工质量。 欧美Y41-63T液压机技术参数 - 最大冲压力:63 t - 工作台尺寸(长 x 宽):580 x 560 mm - 活塞杆速度(压力):10毫米/秒 - 活塞杆速度(返回):95毫米/秒 - 活塞杆速度(空载):38毫米/秒 - 活塞杆行程:500 mm - 最大活塞杆进给量:800 mm - 功率: 7.5 kW
压力: 200 t 立柱间距离: - mm 行程: - mm 工作台表面积: 2000 x 800 mm 总功率要求: kW 机器重量 ca.: 31 t机器尺寸 ca.: m驱动功率 55 / 4 kW跟踪行程 28 mm 安全距离 155 mm跟踪行程 97 ms注油 1200
EXNER EXSBR 200 液压机 YOM 8/1987 系列号 10042 压力 200 t 工作台 1800 x 800 mm 功率要求 65 kW 安全距离 195 mm 超行程 52 mm 运行时间 120 ms 重量约 23 t
编号 4105: 1 格液压铆接机 法布尔。G + K,SI 40/50 型,包伊。2000 辅料: 工作台 500 x 400 mm 其他: 最大压缩力 600 kN 柱塞行程 150 mm 重量约 4500 kg
编号 : 7246 类型:HCFP 制片人: Hidroliksan 创建时间:2022 参数: 压缩力: 100 t 工作台长度: 1400 mm 工作台宽度: 1000 mm 行程长度: 700 mm 框架壁间距离: 1100 mm 机器高度: 3100 mm 机器长度: 1600 mm 机器宽度: 1600 mm 机器重量:4000公
供应 20202 规格: - 最大压力 35 t - 投影到柱塞中间 240 mm - 工作高度可通过手摇曲柄调节 540 至 940 mm - 2 手控 - 带光栅的保护罩外壳 - 材料 - 滑入式装置 - 气动连接 - 通过西门子 SIMATEC OP 7 进行压机控制 - 驱动 400 V / 15.5 kW - 大约需要空间 宽 1200 x 高 2000 x 深 2400 mm - 约重 2500 公斤
PRESS DESIGN drive system: hydraulic frame design: C-frame, single sided PRESS FORCES total force (nominal): 12 toSLIDE stroke: 200 mmELECTRICAL SPECIFICATIONS mains voltage: 380 V mains frequency: 50 HzDIMENSIONS / WEIGHTS total weight approx.: 1000 kg
压力: 63 t支架宽度: 360 mm行程: 400 mm机器重量 约: 4 t空间要求 约: 1.8x1.6x2.7 mwww.marcels-maschinen.ch 数据 fü, 此广告是使用 ModulMWS 创建的 - LogoTech oHG 的机器管理
冲压力 60 至 安装高度 500 mm 压力柱塞行程 300 mm 柱子之间的通道 430 mm 柱塞孔 40D H7 夹紧台 430 x 310 mm
CONTROLS electronic controls PRESS DESIGN frame design: 4 column PRESS FORCES total force (nominal): 400 toPRESS TABLE table surface (left-right): 1200 mm table surface (front-back): 800 mmSLIDE slide force: 400 to table surface (left-right): 1200 mm table surface (front-back): 800 mm stroke: 500 mmSLIDE (HYDR. PRESS) approximation velocity max.: 290 mm/s working velocity min.: 25 mm/s return velocity max.: 290 mm/s return force: 35 toTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1100 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 2255 mm space requirements -front/back-: 1660 mm t ...
CONTROLS PLC SIEMENS S5 95U PRESS DESIGN drive system: hydraulic openings in uprights: yes PRESS FORCES total force (nominal): 350 toPRESS TABLE table surface (left-right): 1600 mm table surface (front-back): 1400 mmSLIDE stroke: 1200 mmSLIDE (HYDR. PRESS) approximation velocity max.: 250 mm/s working velocity min.: 14 mm/s working velocity max.: 50 mm/sTOOL ASSEMBLY DIMENSIONS distance table - slide max.: 1250 mm distance between columns (H-frame): 1650 mm passline opening (free passage in side columns): 630 mmDIMENSIONS / WEIGHTS height above floor level: 4300 mm height under floor level: 1000 mm total weight approx.: 24000 kgATTACHMENTS (PRESSES) European CE standards: yes
PRESS DESIGN drive system: hydraulic frame design: H-frame, monoblock openings in uprights: yes number of suspensions: 2 table cushion: yes PRESS FORCES total force (nominal): 650 toPRESS TABLE table surface (left-right): 3000 mm table surface (front-back): 1800 mmSLIDE slide force: 630 to table surface (left-right): 3000 mm table surface (front-back): 1800 mm stroke: 1000 mmSLIDE (HYDR. PRESS) approximation velocity max.: 200 mm/s working velocity min.: 7 mm/s working velocity max.: 15 mm/s return velocity max.: 120 mm/s return force: 65 toDIE CUSHION (TABLE CUSHION) cushion force: 250 to stroke: 400 mm cushion plate surface (left-right): 2500 mm cushion ...
锁模力:4360 kN工作台尺寸:730 x 730 mm控制:B+R 工业电子 缩回力:190 kN进给速度:最大 60 mm/秒 缩回速度:最大 90 mm/秒机架之间的净宽:900 mm= 硫化机,带垂直夹紧装置和脱模装置的数据 ü,本广告是使用 ModulMWS 创建的 - LogoTech 的机器管理呵呵
Description: Machine number 461048 , Operating pressure 80 atMax. pressing force: 4 to, Approx. Onsite Dimension. (l x w x h): 1,200 x 950 x 2,200 mm, weight approx.: 1,500 kg
Approx. Onsite Dimension. (l x w x h): 1,600 x 1,200 x 1,300 mm, weight approx.: 2,500 kg
Description: Machine number 1800196 Outreach 360 mm Ram strokes 50/min Ram adjustment 100 mm Motor 18.5 kW Current voltage 400 VMax. pressing force: 160 to, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,400 x 3,200 mm, weight approx.: 13,000 kg, table surface area l x w : 1000x700 mm, stroke: 20 bis 140 mm
液压机400吨 额定功率 400 吨 滑动行程 800 mm 滑块尺寸 1300 x 1600 mm 工作台尺寸 1300 x 1600 mm 缓冲行程 350 mm . 电气系统于2020年完全重
压力:63 t支架宽度:0 mm行程:160 mm工作台面:630 x 500 mm安装高度:400 mm总功率要求:kW机器重量约:5 t空间要求约:m本广告的数据是使用ModulMWS创建的 - LogoTech oHG的机器管理
Description: Machine number 1388Approx. Onsite Dimension. (l x w x h): 1,350 x 700 x 2,400 mm, weight approx.: 1,000 kg
制造商 |制造商: ONA - Pres 描述 |常用中文名:PYZT 1200 建设年份 |制造年份:1990 可调压紧力 |可调压制力: 1200 - 12000 kN (1200 t) 最大提升高度 |最大提升高度: 700 mm 工作台/柱塞尺寸 |工作台/柱塞尺寸:1600 x 4000 mm
1990年在波兰制造的PONAR ŻYWIEC PHM 160 D液压机用于加工金属和加工塑料(例如POLOFEN或三聚 胺)或橡胶。该机床的特点是可靠性高,在手动模式 以及半自动或自动模式下以 160 吨的力进行精密加工,这要归功于它配备了时间继电 。龙门压力机还配备了一个力为 60 吨的液压喷射器和两个用于加热板上下部的温度控制 。机器的总重量为4000公斤。 波纳尔日维茨PHM 160 D压力机技术参数 - 最大压力: 160 t (1600 kN) - 顶出力: 60 t (600 kN) - 工作台表面(长 x 宽):800 x 800 mm - 压制速度:5.6毫米/秒 - 闭合速度:91毫米/秒 - 开启速度:98毫米/秒 - 工作台之间的最大距离:1000毫米 - 液压顶出器行程:250 mm - 活动台行程:500毫米 - 最大加热功率:1 kW - 驱动功率:7,5 kW - ...
液压机 ZHO700N 制造商: 压力液压 年份: 2015 标称压力...700吨 夹紧工作台表面2500x1500毫米 柱塞行程...500毫米 安装高度...1200毫米 杵尺寸...2400x1000毫米 展台之间的距离...2500毫米 控制西门子 下部弹射力...234吨 下部弹出的行程...200毫米 机器重量...52000公斤 长 x 宽 x 高 ...5150x2870x4710毫米 机器状况良好,可以在动力下进行测试
Description: Machine number 7470 , Pressure capacity of the drawing cushion 400 KN Stroke of the drawing cushion 200 mm , Rapid lowering speed approx. 400 mm/s Working speed approx. 57 mm/s Return speed approx. 310 mm/s Drive power 22 kW ,Max. pressing force: 160 to, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,300 x 2,500 mm, weight approx.: 12,000 kg, table surface area l x w : 1400x600 mm, stroke: 500 mm
pressure: 160 tdayligth: 500 mmdistance between columns: mmstroke: 400 mmControl: draw back pressure: 24 ttable-size: 1000x800 mmtotal power requirement: 65 kWweight of the machine ca.: 17 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
-滚齿机 -制造:萨克和基塞尔巴赫 -类型: 500 MP -Mach.No:30407 -容量: 500 吨 -立柱之间的宽度: 420 -日光:370 -行程: 340 -夹紧面:Ø 500 -关闭速度: 100 毫米/秒 -压制速度: 1.8 毫米/秒 -打开速度: 200 毫米/秒 -权力 -尺寸: -重量 3.25 + .330 -长 x 宽 x 高: 2.245 x 1.8 x 1.17
液压机 舒勒液压机 HYDRAP 315 制造商: 舒勒 型号: HPDZb 3150-3000/1300 新品:2001 条件: 非常好 技术细节 冲程: 315 T 工作台尺寸: 3 000 x 1 300 mm 最小模具冲压尺寸:2 000 x 866 mm 滑动行程: 800 mm 最大闭合高度: 1 300 mm 每分钟冲程数(调节): 13-46 容量: 160 T 冲程: 200 mm
Description: Machine number 04926102 Press force of the die cushions 40 to 400 kN Die cushion stroke 200 mm Stand passage 1450 mm, lateral 700 x 600 mm Includes control unit, 2-hand operation, ,documentation  , Attention: without loading robotMax. pressing force: 160 to, Approx. Onsite Dimension. (l x w x h): 3,500 x 2,400 x 3,900 mm, weight approx.: 16,000 kg, table surface area l x w : 1400x1200 mm, stroke: 500 mm
Description: Machine number ,12.88.4715 Operating pressure 275 bar Ejection force 800 kN Follow-up time 110 ms Safety distance 176 mm Operating voltage 380 V Includes 2-hand operation and accessory cabinet  , Attention: without placement robotMax. pressing force: 250 to, Approx. Onsite Dimension. (l x w x h): 3,500 x 2,400 x 3,900 mm, weight approx.: 16,000 kg, table surface area l x w : 1300x1000 mm
: neu : ca. 4 Monate ab Auftragse : Italien : 66700 €: 1340.67 €: 150 to: 500 mm: 1.550 x 2.000 mm: 800 mm: 20 mm/s: 3 mm/s: 2350 mm: 2000 mm: 2500 mm: 4100 kg: horizontal verschiebbar : 1550 mm: 1000 mm: 1300 mmHORIZONTAL MOVABLE CYLINDER1.000MMHYDRAULICALY MOVABLE STAND 1.300 MMcontrol by levers as well as control paneltable with integrated cylinder to lift the workpieceaccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.