液压合模机和试模机

pressure: 125 tdistance between columns: 1500 / 460 mmstroke: 400 mmtotal power requirement: 15 kWweight of the machine ca.: 10 tdayligth: 800 mmtable surface area: 1900x870 mmram surface: 1900x870 mmworking feed: 0-10 mm/secreturn speed: 0-20 mm/secdimensions: BxTxH 2400x1500x3500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

press ram:: ram head width: 2.100 mmdepth: 840 mmstroke: 350 mmControl: EXNER Guide way length: 750 mmnominal pressure: 2x 400 kNreturn capacity: 2x 150 kNram stroke speed - under load: 100%: ca. 0 - 10 mm/sram stroke speed: ca. 0 - 20 mm/sT-slot - width: 18 mmT-slot - distance: 150 mmInstallation Space:: dayligth: 550 mmtable surface area: 1.600 x 840 mmT-slot - width: 18 mmT-slot - distance: 90 mmdist. between pillars (left to right): 1.700 mmdist. between pillars (front to rear): 600 mmtable height over floor: 1.300 mmtotal power requirement: 11 kWweight of the machine ca.: 12 tdimensions of the machine ca.: 2,5 x 2,0 x 3,7 mHydraulic tool testing pressEXNER - PG 80- very good condition- approx. 300 operating hours- Electronic roller feed device EV 22 AK incl. Bandwidth: max. 220 mm Band cross section: max. 200 mm² Feed length: 0.1 x 19,999 mm Speed: max. 120 m/min R ...

液压工具试验机和小批量压力机， 公称力 ： 400to， 行程： 600mm ， 工作台面/柱塞表面：2500 x 1500mm 4200个工作小时，重量：32to。 在电力下访问。

4柱刀具试验机，压制力250吨�

压力： 400 t 行程： 600 mm 日光： 900 mm 夹持面（横向）： 2500x1000 mm 表面积： 2000x1500 mm 工作台孔： 1500x200 mm 总功率要求：45 kW 机器重量约： 32 t模垫面积： 100 mm 模垫面积： 150 mm