二手 HELMERDING 出售

Description: Press force: 12 t Max. stroke: 60 mm Stroke: 6 - 60 mm weight approx.: 750 kg, Approx. Onsite Dimension. (l x w x h): 900 x 900 x 2,000 mm

pressure: 110 t throat: 295 mm stroke: 20-120 mm no. of strokes: 60/90 Hub/min ram - range of adjustment: 85 mm table surface area: 920x580 mm ram surface: 540x280 mm hole in the table: 300x180 mm table height: 830 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,1 t dimensions of the machine ca.: BxTxH 1500x2000x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 35 t throat: 230 mm stroke: 12-84 mm no. of strokes: 135 Hub/min ram - range of adjustment: 70 mm table surface area: 600x460 mm ram surface: 340x170 mm hole in the table: 220x130 mm table height: 800 mm tool hole in ram: Ø 35 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1800x1800x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

压力：110 t 投影：300 mm 行程：20-120 mm 行程速率：60/90 行程/分钟 冲程调节：85 mm 工作面：920x560 mm 滑颈面积：540x280 mm 工作台开口：320x190 mm 工作台高度：柱塞中的 800 mm 针孔：50 mm 机器重量约为：5.6 t 空间要求约：2000x2000x2600 mm 手动润滑脂中央润滑 液压离合器制动器组合 滑枕 中的机械断裂板 双手操作 脚踏控制 数据 fü， 这则广告是用模数MWS创建的 - 标志科技oHG的机器管理。

压力：150 t 投影：350 mm 行程：20-120 mm 行程速率：40-60 行程/分钟 柱塞调节：85 mm 工作台面：1050x690 mm Ram区域：650x320 mm 工作台开口：325x200 mm 工作台高度：柱塞中的 850 mm 针孔：50 mm 机器重量约：8.6 t 空间要求约：2500x2500x2900 mm 手动润滑脂中央润滑 冲压塞 -制动器组合 机械式离合器制动器组合 机械式断盘 双手操作 脚踏控制 数据 fü， 这则广告是用模数MWS创建的 - 标志科技oHG的机器管理。

pressure: 35 t throat: 230 mm stroke: 20-120 mm no. of strokes: 130 Hub/min ram - range of adjustment: 70 mm ram surface: 330x170 mm table surface area: 600x450 mm hole in the table: 200x120 mm : 150 mm weight of the machine ca.: 3.0 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t throat: 350 mm stroke: 20-120 mm no. of strokes: 50 / 75 Hub/min ram - range of adjustment: 85 mm table surface area: 1150x670 mm ram surface: 800x380 mm hole in the table: 330x200 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 315 t stroke: 40-200 mm no. of strokes: 20-100 Hub/min ram - range of adjustment: 120 mm ram surface: 2000x1100 mm table surface area: 2000x1200 mm hole in the table: 1700x250 mm : 500 mm column travel -side: 820x650 mm total power requirement: 45 kW weight of the machine ca.: 44 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

压力：100 t 投影：300 mm 行程：20 - 124 mm 每分钟行程率：60/90 柱塞调整：85 mm 工作台面：920 x 600 mm 挺杆面积：540 x 290 mm 安装高度，上面有重力行程和柱塞顶部：最大 440 mm 腹泻表开口：290 x 170 mm 柱塞中的针孔：Dm. 50 mm 总功率要求：6.5 - 8.5 kW 机器重量约为： 5.7 t 空间要求 约： m 设备： - 车轮- 3折安装轴 - 半自动行程调节 - 循环油润滑 - 液压。离合器 带油冷却器的液压系统 数据fü，此广告是使用ModulMWS创建的 - LogoTech oHG的机器管理。

pressure: 100 t throat: 300 mm stroke: 20 - 128 mm ram - range of adjustment: 80 mm strokes per minute: 60 - 90 table surface area: 920 x 600 mm ram surface: 540 x 290 mm hole in the table: 315 x 180 mm daylight, max. stroke above - ram adjustment above: 520 mm tool hole in ram: Dm. 50 mm total power requirement: kW weight of the machine ca.: 5,8 t dimensions of the machine ca.: 1,8 x 1,7 x 2,2 m Furnishing: - Gear transmission - fixed table - Triple bearing shaft - semi-automatic stroke adjustment - hydraulic clutch-brake combination - hydraulic overload (modern unit mounted on the stand on the left) - Hydraulic unit with oil cooler for clutch mounted on the left side of the stand - Ball spindle adjustment using a ratchet - automatic central lubrication VOGEL - Operating instructions / CE declaration available Machine is partially overhauled in our company as follows: - dismantled, clea ...

pressure: 50 t throat: 245 mm stroke: 14 / 90 mm ram adjustment: 75 mm table height adjustment: 150 mm strokes per minute: 42/85 table surface area: 700 x 490 mm ram surface: 400 x 230 mm tool hole in ram: 40 mm total power requirement: 4 kW weight of the machine ca.: 3,41 t dimensions of the machine ca.: 0,8 x 1,75 x 2,1 m Machine is partially overhauled in our house as follows: - Cleaning and inspection - new control cabinet with safety control and touchscreen display - new 2-hand control panel - Current UVV test with braking time measurement - Machine safe for hand inlay work The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50 t throat: 250 mm stroke: 6/98 mm ram adjustment: 75 mm no. of strokes: 60/90 Hub/min table height adjustment: 150 mm table surface area: 695 x 500 mm total power requirement: kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 0,9 x 1,6 x 2,15 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 75 t throat: 300 mm stroke: 8 - 110 mm table surface area: 750 x 600 mm ram adjustment: 75 mm ram surface: 430 x 230 mm hole in the table: 250 x 150 mm tool hole in ram: 40 mm no. of strokes: 60 + 90 Hub/min weight of the machine ca.: 4,4 t total power requirement: 4,5 - 6,8 kW dimensions of the machine ca.: 1,95 x 1,1 x 2,35 m distance table/ram: Hub unten, Stöß. unten 19 mm distance table/ram: Hub oben, Stöß. oben 380 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.