二手 HEILBRONN 出售

带钢矫直机，带进料辊对，上半部液压。铰链式， 卷筒宽度最大 320 mm，滚筒宽度 60 mm，否则见图�

压缩力 ： 80 t 投影： 350 mm 工作台尺寸： 700 x 720 mm 表中的腹泻水平：160 mm 柱塞面积： 300 x 445 mm 柱塞调节：约 80 mm 行程调整： 8 - 100 mm 冲程速度：约 90 rpm 驱动电机：380 V，约 5 kW 手机尺寸： 2050 x 1100 x 2450 mm 重量：约3800公�

压力：75t 工作台： 650 x 560 mm 柱塞面积： 500 x 300 mm 行程速度：50-250行程/分钟 提升高度：8-80 mm 最大安装高度： 400 mm 侧支架之间的通道： 300 毫米 馈线： 制造商： GSW 型号： WV32/80 带宽：最大320mm 胶带厚度：最大3.5mm 滚筒直径：80mm

压力： 65 t - 行程：140毫米 - 工作台尺寸：720 x 600 mm - Stoesselflaeche： 500 x 300 mm - 斯托塞尔调节：80毫米 - 行程：每分钟 20 - 40 次 - 马施。重量： 6000 kg - 空间要求（长 x 宽 x 高）：高度 3.1 米 - 夹紧销孔 60 x 80 mm 更多信息请咨�

压缩力：100 t 投影： 350 mm 工作台尺寸： 690 x 840 mm 表中腹泻： 160 mm 工作台调整： 挺杆面积： 450 x 600 mm 挺杆调节： 80 mm 行程调整： 8 - 100 mm 冲程速率：60次/分钟 驱动电机：380 V，5.5 kW 空间要求：1850 x 1850 x 2650 mm 重量： 6800 kg

带 12 个工位的旋转分度台 自动顶出器 三个压制阶段 压力容量 1，000 KN 行程 12-120 mm 行程速率 30-60 1/min 柱塞调节 80 mm 总重量 9，500 kg

压力 50 吨 行程 8 - 100 mm 最大冲程速率 140 冲程/分钟 驱动功率 3 kW 夹紧面 650 x 500 mm 机器重量约 2，750 kg

pressure:100 t throat:350 mm stroke:6 - 100 mm no. of strokes:60 /min distance table/ram, max. stroke up, adjustment up:400 mm table surface area:850 x 700 mm hole in the table:470 x 150 mm table height over floor:855 mm ram surface:450 x 300 mm ram adjustment:80 mm power requirement:7,5 kW weight:5,0 t dimensions (WxDxH):1,5 x 2,3 x 2,6 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical

Pressure:080 t throat:300 mm stroke:8 - 100 mm no. of strokes:60 /min distance table/ram, max. stroke up, adjustment up:440 mm table surface area:720 x 600 mm hole in the table:300 x 175 mm table height over floor:860 mm ram surface:400 x 270 mm ram adjustment:60 mm power requirement:7,5 kW weight:6,0 t dimensions (WxDxH):1,3 x 2,2 x 3,05 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic, Ortlinghaus overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic

pressure:080 t throat:300 mm stroke:7 - 100 mm no. of strokes:120 /min distance table/ram, max. stroke up, adjustment up:450 mm table surface area:720 x 600 mm hole in the table:300 x 120 mm table height over floor:850 mm ram surface:400 x 275 mm ram adjustment:60 mm power requirement:5,5 kW weight:6,5 t dimensions (WxDxH):1,2 x 2,0 x 2,9 m German Safety: permitted for manual loading:CE-sign light guard:Sick clutch:hydraulic overload protection in ram:hydraulic ram adjustment:motoric stroke adjustment:automatic

pressure:160 t throat:690 mm stroke:8 - 180 mm no. of strokes:50 /min distance table/ram, max. stroke up, adjustment up:500 mm table surface area:1300 x 1000 mm hole in the table:400 / 120 mm table height over floor:850 mm passage to the back:900 mm ram surface:1000 x 700 mm ram adjustment:130 mm power requirement:11,0 kW weight:19,0 t dimensions (WxDxH):2,4 x 2,8 x 3,4 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic ram adjustment:motoric ram counterbalance:pneumatic

Description: Machine number: 4717 Feed size: 500 x 3 mm Belt infeed height (with plate): 170 - 270 mm Additional device: 2-hand operation Table size: 1250 x 900 mm Plunger surface (blue): 800 x 600 mm Projection of ram center dimension stand: 510 mm Installation height center dimension (without plate): 500 mm Clamping plate thickness: 125 mm Trunnion Ø: 65 mm Smallest / largest stroke: 27 - 140 mm Number of strokes: 48 With electronic roller feed: Wanzke WVS 500 Indramat control system, serial no. 102414-1, year of manufacture 1998 With reel straightener: PBK RMC4 80/7/50 RSD GLST, serial no. BA00967, year of manufacture 2006 With minimum quantity lubrication: , Schmidt System 2000 Max. pressing force: 250 to, weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 2,250 x 3,200 x 3,500 mm

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Heilbronn, single column eccentric press type NEPD 50 -Pressure capacity: 50 tons -Clutch: pneumatic -Stroke: adjustable 8 - 100 mm -Table size: 500 x 650 mm -Table recess: Ø 240/100 mm -Projection: 255 mm -Punching fixture: Ø 40 mm -Insertion height 355 mm -Dimensions: 1800/1080/H2260 mm -Weight: 3050 kg

压力：100 t 投影：350 mm 行程：8-80 mm 安装高度：300 mm 行程速率：125 冲程/分钟 挺杆调整：80 mm Ram 区域：400x300 mm 工作台表面：850x700 mm 工作台击穿开口：350x200 mm 总功率要求：7.5 kW 机器重量 约：4.5 t 空间要求 约：m 双手操作夹 板 气动离合器制动器组合 脚踏开关 手动中央润滑 批准用于手动插入 此广告的数据是使用模数MWS创建的 - 标识科技oHG的机器管理。

pressure: 160 t throat: 440 mm stroke: 20-150 mm : 50 Hub/min : ca. 390 mm : 1300 x 750 mm : 170 mm : 400 / 250 mm : 50 mm : 445 x 560 mm : 7,5 kW : 8 t : 2,9 x 1,5 x 2,8 m total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 350 mm stroke: 8 - 100 mm no. of strokes: 60 Hub/min daylight (stroke down, ram adjustment above): 300 mm ram adjustment: manuell 80 mm table surface area: 850 x 700 mm hole in the table: Dm. 180 mm mm ram surface: 560 x 400 mm ram drills x depth: 40 x 95 mm table height over floor: 850 mm total power requirement: 7,5 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 1,4 x 2,2 x 2,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching force: 75t, with Band Feeder GSW WV32/80, max. band width: 320mm, max. band thickness: 3.5mm, roller diameter: 80mm, an inspection is possible.

Pressure capacity: 500KN, stroke: 8-100mm, stroke rate: 100/min. Ram adjustment: 80mm, drive: 4kW, weight: 2850kg. Safety distance: 175mm, overtravel: 53mm, overtravel time: 110ms.

Capacity: 25 ton Throat depth: 250 mm Ram stroke: 6 - 60 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 190 mm Height of the bolster plate: 50 mm Table surface area : 500 x 400 mm Slide area: 350 x 250 mm Tool Clamping Hole Ram: 40 H7 mm Number of strokes: 160 s.p.m. Dimensions L x W x H: 1.300 x 1.500 x 1.995 mm Weight of machine approx.: 2 ton