压力机 二手 出售

编号：4877： 1 格布尔。单柱液压机 法布尔。EITEL，类型 T 6.3，包吉。1973 ... 更多信息

产能：2500吨 滑块行程： 190 mm 滑块工作过程在其最底部位置之前的尺寸对应于标称� ��量：4.5 mm 每分钟的滑块课程数量： 20 工作台与滑块之间的最大距离（位于滑块的下部位置� ��：800 mm 工作台和滑块之间的距离调整：20 mm 表外形尺寸： - 从前到后：1400毫米 - 从左到右：1250毫米 锻造板厚度： 230 mm 工作台孔直径： 125 mm 前后滑块的尺寸：900 mm 下部除尘器行程长度：190 mm 底部推杆的力：75吨 栏杆间距： 950 mm 滑块中的推杆路线：15 mm 滑块中推杆的容量：25吨 每分钟允许的启动次数：10 机器外形尺寸 - 长度：3910毫米 - 宽度：3920毫米 - 高度：6220毫米 冲压重量： 97715 kg

压缩力：100 t 投影： 350 mm 工作台尺寸： 690 x 840 mm 表中腹泻： 160 mm 工作台调整： 挺杆面积： 450 x 600 mm 挺杆调节： 80 mm 行程调整： 8 - 100 mm 冲程速率：60次/分钟 驱动电机：380 V，5.5 kW 空间要求：1850 x 1850 x 2650 mm 重量： 6800 kg

压力：75t 工作台： 650 x 560 mm 柱塞面积： 500 x 300 mm 行程速度：50-250行程/分钟 提升高度：8-80 mm 最大安装高度： 400 mm 侧支架之间的通道： 300 毫米 馈线： 制造商： GSW 型号： WV32/80 带宽：最大320mm 胶带厚度：最大3.5mm 滚筒直径：80mm

容量250吨 最大柱塞行程结束时运动部件的动能 13，5 kj 最大滑枕行程 400 mm 冲压斯托克斯数量 （SPM） 34 滑动间隙 560 mm 滑枕尺寸（前背 560 mm 台面尺寸 670 x 750 mm 喷射器容量较低 16 吨 下部顶出器运动 105 mm 主驱动电机功率 15 kW 印刷机尺寸 3710 x 1925 x 4415 mm 压力机重量 18000 kg

pressure: 63 tthroat: 320 mmstroke: 8-100 mmno. of strokes: 120 Hub/minram - range of adjustment: 63 mmtable surface area: 860x620 mmram surface: 540x360 mmhole in the table: Ø 270 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5,5 tdimensions of the machine ca.: BxTxH 1500x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

投资编号 ： 5698 型号： LKT 250 制片人：金属压榨机 创建时间： 1974， GO 2002 参数： 压缩力： 250 t 工作台长度： 1150 mm 台面顶部宽度： 1580 mm 最大行程速率顶表：7-25 1/min 滑块行程： 250 mm 调节柱塞： 100 mm 机器重量： 22950 kg GO 2002：转换为液压离合器 电子控�

曲柄压力机扎梅赫PKRR 400A制造于1974年。 技术参数 ： - 压力：400吨 - 支架间距：1020 mm - 冲压行程：315毫米 - 每分钟冲程数：20 - 滑块与工作台关闭的最大距离：742.5 mm - 滑块调整：250毫米 - 工作台尺寸：1020 x 1050 mm - 主发动机功率：40千瓦 - 主发动机转速：1500 1 /分钟。 - 压力机重量：40�

pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive tool changing unit:2 x

pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive tool changing unit:2 x

pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive tool changing unit:2 x

pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive overload protection in ram:hydraulic ram adjustment:motoric tool changing unit:2 x

pressure:250 tthroat:450 mmstroke:36 - 126 mmno. of strokes:40 /mindistance table/ram, max. stroke up, adjustment up:525 mmtable surface area:1000 x 750 mmhole in the table:400 x 360 mmtable height over floor:1000 mmram surface:600 x 500 mmram adjustment:111 mmpower requirement:19,0 kWweight:13,5 tDimensions (WxDxH):1,3 x 3,2 x 3,35 mclutch:pneumatic overload protection in ram:mechanical ram adjustment:motoric

pressure:160 tthroat:690 mmstroke:8 - 180 mmno. of strokes:50 /mindistance table/ram, max. stroke up, adjustment up:500 mmtable surface area:1300 x 1000 mmhole in the table:400 / 120 mmtable height over floor:850 mmpassage to the back:900 mmram surface:1000 x 700 mmram adjustment:130 mmpower requirement:11,0 kWweight:19,0 tdimensions (WxDxH):2,4 x 2,8 x 3,4 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic ram adjustment:motoric ram counterbalance:pneumatic

pressure: 40 tthroat: 230 mmstroke: 8-88 mmthroat: 230 mmno. of strokes: 130 Hub/minram - range of adjustment: 63 mmtable surface area: 560x450 mmram surface: 250x200 mmhole in the table: Ø 190 mmtable height: 790 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 3,0 tdimensions of the machine ca.: 1000x1800x2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Kaiser, punching machine with gripper feed type PO 40 F -Pressure capacity: 55 tons -Stroke: adjustable from 9 to 60 mm -Stroke rate: 70-350 strokes/min -Table size: 590 x 410 mm -Table recess: 290 x 150 mm -Projection: 220 mm -Punching fixture: Ø 38 mm -Insertion height 335 mm -Dimensions: 1905/1540/H2940 mm -Weight: 3720 kg

印刷机经过全面翻新。工作范围：车身和盖板的清洁� ��重新喷漆、离合器轮盘衬的再生、新的气动安装、� �的电气安装、新的控制（菲斯勒FMSC控制器、西门子� �制面板、脚踏限位开关）、支脚的安装、新的用户手 册和记录的现代化历史。提供原始文档。 压力：25吨 麦克斯。冲程数/分钟： 125 滑块行程：8-60mm 滑块调节范围：55mm 重量： 1400 kg

CONTROLS  PLC PNEUTRONIC PRESS DESIGN  drive system: knuckle-joint   frame design: H-frame, monoblock   feedstock transport direction: left to right SLIDE  total force (nominal): 250 to  stroke: 61 mm  stroke rate (max.): 60 /minCOUNTER RAM  nominal force: 75 to  stroke: 13 mmV-RING  nominal force: 75 to  stroke: 15 mmTOOL DIMENSIONS  lower table (left-right): 540 mm  lower table (front-back): 540 mm  upper table (left-right): 540 mm  upper table (front-back): 540 mm  shut height max.: 320 mm  ram adjustment: 145 mmSTRIP-FEEDER  feeder type: roll feeder   pilot release system: yes ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS   ...

pressure:120 tdistance between columns:430 mmstroke:125 mmdistance table/ram, stroke up:400 mmtable surface area:430 x 450 mmtable height over floor:860 mmside window:230 mmram surface:250 mmworking speed:10 mm/spower requirement:11,0 kWweight:2,5 tdimensions (WxDxH):1,6 x 1,3 x 2,4 mGerman Safety: permitted for manual loading:CE-sign

Pressure:800 tdistance between columns:2560 mmstroke:1050 mmDistance table/ram, stroke up:1870 mmTable surface area:2500 x 1730 mmpressure of drawing cushion in table:300 tDie cushion stroke in table:395 mmDie cushion area in table:2300 x 1300 mmRam surface:2500 x 1730 mmDie cushion pressure in ram:63 tDie cushion stroke in ram:150 mmSide window:1000 mmOil volume:4300 lPower capacity:200,0 kWDimensions (WxDxH):4,1 x 2,8 x 10,0 mHeight above floor:7,0 mdie cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable