压力机 二手 出售

Pressure:800 tdistance between columns:3250 mmstroke:1100 mmDistance table/ram, stroke up:1900 mmTable surface area:3100 x 1900 mmpressure of drawing cushion in table:300 tDie cushion stroke in table:300 mmDie cushion area in table:2500 x 1800 mmDie cushion pressure in ram:80 tDie cushion stroke in ram:200 mmDie cushion area in ram:2200 x 1000 mmRam surface:3100 x 1900 mmSide window:900 mmOil volume:4700 lPower capacity:200,0 kWDimensions (WxDxH):4,95 x 3,3 x 10,2 mHeight above floor:7,05 mdie cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable cutting impact absorption:hydraulic

Description: 170 ton power Bending length 3050 mm Distance between uprights 2500 mm Gooseneck 250 mm Stroke 250 mm Rebuilt and brought up to standard in 2003 Cybelec DNC 60 numerical control. New tooling lineweight approx.: 12,000 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 1,700 x 3,100 mm ... 更多信息

商品代码： 13-13-023 制造商： Neher 总体状况非常好 经过机械车间测试 出货时间：保留所有权利。 建造年份：约1972年 长x宽x高：约1600x1600x2300mm 重量：约1200kg 最大压制力：约20吨 轮子直径：约1600mm 工作行程：约300mm 可根据要求提供其他配件 价格和其他技术数据可根据要求提�

商品编号： 13-13-024 制造商： Reyer 总体状况非常好 经过机械车间测试 出货时间：保留所有权利。 建造年份：约1972年 长x宽x高：约1200x800x2000mm 重量：约400kg 最大压制力：约20吨 台面：约420x530mm 可根据要求提供其他配件 价格和其他技术数据可根据要求提�

压缩力：75 t 投影： 300 mm 工作台尺寸： 620 x 800 mm 表中的腹泻：225 x 325 mm 工作台调整： 175 mm 柱塞面积： 180 x 475 mm 挺杆调节： 80 mm 行程调整： 16 - 140 mm 行程速率：90 次/分钟 驱动电机：380 V，3 kW 空间要求：1700 x 1200 x 2500 mm 重量： 3300 kg

nominal force:315 tstroke:300 mmno. of strokes:36 /mindistance between columns:540 mmdistance table/ram, max. stroke up, adjustment up:750 mmtable surface area:530 x 630 mmblow die to die:630 tAllowed max. force:500 tram surface:450 x 560 mmspindle diameter:180 mmpower capacity:18,0 kWweight:13,0 tDimensions (WxDxH):2,5 x 2,0 x 4,0 m

压力： 160 t 柱间距离： 850 mm 行程： 150 mm 工作台面积： 850x650 mm总功率要求：kW机器重量 约： 7 t机器尺寸 尺寸： 2，5 x 2，5 x 3 m ... 更多信息

压力：25 t投影：220 mm行程：8-80 mm安装高度：355 mm行程速率：140 行程/分钟挺杆调整：50 mm冲压面积：220x180 mm工作台表面：160 mm击穿工作台开口：90 mm总功率要求：7.5 kW机器重量约：2 t飞轮摩擦离合器。插头前柜台轴承中的破损保护 手动中央润滑黑色防护罩数据 fü，此广告是用ModulMWS创建的 - LogoTech oHG的机器管理�

冲压力： 40 t 工作台尺寸： 670 x 470 mm 挺杆面积： 670 x 470 mm 柱之间的通道：620/470 mm 总安装高度： 740 mm 压制速度：20毫米/秒 快速移动：50 mm 顶出力： 3 t 电气。连接： 380 V， 9.5 kW 空间要求：2200 x 1875 x 3000 mm 重量： 2400 kg

pressure:500 tstroke:40 - 160 mmno. of strokes:32 / 48 /mindistance between columns:1620 mmdistance table/ram, max. stroke up, adjustment up:660 mmtable surface area:1600 x 1300 mmtable height over floor:750 mmcolumn travel -side:400 x 430 mmram surface:1400 x 1200 mmram adjustment:120 mmpressure of drawing cushion in table:60 tstroke of drawing cushion in table:100 mmdrawing cushion surface in table:1300 x 810 mmmaterial width of feeder:1000 mmmaterial thickness of feeder:- 6,0 mmfeed length:350 mmheight beneath floor:0,3 mpower requirement:44,0 / 66,0 kWweight:56,0 tDimensions (WxDxH):3,55 x 2,55 x 5,1/5,8 mheight beneath floor without drawing cushion:0,3 mheight beneath floor with drawing cushion:1,0 mclutch-/ brake combination:pneumatic; Desch overload protection in ram:mechanical ram counterbalance:pneumatic ram adjustment:motoric drawing cushion in table:pneumatic Mechanical pincer ...

pressure:500 tstroke:40 - 160 mmno. of strokes:32 / 48 /mindistance between columns:1620 mmdistance table/ram, max. stroke up, adjustment up:660 mmtable surface area:1600 x 1300 mmtable height over floor:750 mmcolumn travel -side:400 x 430 mmram surface:1400 x 1200 mmram adjustment:120 mmmaterial width of feeder:1000 mmmaterial thickness of feeder:- 6,0 mmfeed length:350 mmpower requirement:44,0 / 66,0 kWweight:56,0 tDimensions (WxDxH):3,55 x 2,55 x 5,1/5,8 mheight beneath floor:0,3 mpneumatic clutch-brake combination:Desch Mechanical pincers feed:Obru, BVK 3.10.3

pressure:500 tstroke:40 - 160 mmno. of strokes:32 / 48 /mindistance between columns:1620 mmdistance table/ram, max. stroke up, adjustment up:660 mmtable surface area:1600 x 1300 mmtable height over floor:750 mmcolumn travel -side:400 x 430 mmram surface:1400 x 1200 mmram adjustment:120 mmpressure of drawing cushion in table:60 tstroke of drawing cushion in table:100 mmdrawing cushion surface in table:1300 x 810 mmmaterial width of feeder:1000 mmmaterial thickness of feeder:- 6,0 mmfeed length:350 mmpower requirement:44,0 / 66,0 kWweight:56,0 tDimensions (WxDxH):3,55 x 2,55 x 5,1/5,8 mheight beneath floor without drawing cushion:0,3 mheight beneath floor with drawing cushion:1,0 mpneumatic clutch-brake combination:Desch drawing cushion in table:pneumatic Mechanical pincers feed:Obru, BVK 3.10.3

pressure:400 tdistance between columns:1250 mmstroke:250 fix mmno. of strokes:45 /mindistance table/ram, max. stroke up, adjustment up:825 mmtable surface area:1000 x 900 mmcolumn travel -side:400 x 700 mmram surface:1000 x 900 mmram adjustment:100 mmcapacity of ejector in table:40 tejector stroke:160 mmpower capacity:270,0 kWweight:44,0 tDimensions (WxDxH):2,4 x 3,6 x 7,2 mheight over floor:6,4 m

Punching force: 75t, with Band Feeder GSW WV32/80, max. band width: 320mm, max. band thickness: 3.5mm, roller diameter: 80mm, an inspection is possible. ... 更多信息

Pressure:080 tthroat:280 mmstroke:20 - 120 mmno. of strokes:42 - 125 /mindistance table/ram, max. stroke up, adjustment up:510 mmtable surface area:700 x 560 mmhole in the table:280 mmtable height over floor:800 mmpassage to the back:320 mmram surface:560 x 350 mmram adjustment:72 mmWeight:5,2 tDimensions (WxDxH):1,6 x 1,6 x 2,6 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical

最大电容 80 T ... 更多信息

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 30 toPRESS TABLE  table surface (left-right): 480 mm  table surface (front-back): 428 mmSLIDE (MECHAN. PRESS)  slide adjustment: 40 mm  stroke adjustment: yes   stroke min.: 8 mm  stroke max.: 40 mm  variable speed: yes   stroke rate (min.): 100 /min  stroke rate (max.): 600 /minTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 220 mmSTRIP-FEEDER  feeder type: roll feeder   feeding step min.: 20 mm  feeding step max.: 100 mmELECTRICAL SPECIFICATIONS  total power consumption: 4.5 kW  mains voltage: 380 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1200 mm &nbs ...

-行程结束时的最大压力 – 4000吨 -冲压行程 – 400 mm -行程数 – 每分钟 50 次 -距工作台的最大行程距离 – 1400 mm -滑块的尺寸： 1320 x 1320 毫米 -床的尺寸： 1120 x 1600 毫米 -床按高度移动 – 20 毫米 -上部喷射器的最大压力 – 20 t -上部顶出器最大行程 – 65 mm -下部喷射器最大压力 – 40t -下部顶出器的最大行程 – 80 mm -主电机功率 – 225 kW -主电机转速 – 730 rpm -总宽度 — 6280 毫米 -总深度 – 4885 mm -总高度 – 8870 mm -床上高度 – 7315 毫米 -总净重 – 280 092 公�

Pressure:1600 tdistance between columns:4100 mmslide stroke:1450 mmDistance table/ram, stroke up:2750 mmdistance table/blank holder, stroke up:2200 Table surface area:4000 x 2200 mmram pressure:1000 tPressure of blank holder:600 tstroke of blankholder:1000 mmblank holder surface:4050 x 2200 mmRam surface:3200 x 1650 mmpressure of drawing cushion in table:360 tDie cushion stroke in table:300 mmdie cushion area:3500 x 1600 mmSide window:1100 mmOil volume:9000 lPower capacity:390,0 kWWeight:250,0 tDimensions (WxDxH):5,95 x 4,3 x 10,5 mHeight above floor:8,6 mdie cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable

Pressure:1000 tdistance between columns:4100 mmstroke:1200 mmDistance table/ram, stroke up:2100 mmTable surface area:4000 x 2200 mmpressure of drawing cushion in table:360 tDie cushion stroke in table:300 mmDie cushion area in table:3500 x 1600 mmDie cushion pressure in ram:100 tDie cushion stroke in ram:160 mmDie cushion area in ram:3250 x 1600 mmRam surface:4000 x 2200 mmSide window:1300 mmOil volume:8000 lPower capacity:300,0 kWDimensions (WxDxH):5,75 x 4,3 x 9,55 mHeight above floor:7,7 mdie cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable cutting impact cushioning:hydraulic