子类目
(三级类目)
生产厂家:
(品类: 106)
压力: 800 t 柱间距离: 600 mm 行程: 65 mm 柱塞 - 调整范围: 50 mm 工作台表面积: 590x650 mm 柱塞表面: 590x450 mm 冲程数: 45 轮毂/分钟 总功率要求: 22 kW机器重量 约: 18 t机器尺寸: BxTxH 1700x2600x3100 mm ... 更多信息
压力:63 t投影:280 mm行程:8-100 mm行程速率:56/84 行程/分钟柱塞调整:63 mm工作台面:620x500 mm柱塞面积:310x260 mm工作台开口:250 mm工作台高度:850 mm柱塞中的针孔:40 mm机器重量约:4 t空间要求约:1200x1900x2800 mm手动中央润滑机具。插头中的破片 前柜台轴承摩擦离合器脚控制仅批准用于安全工具本 告的数据是使用ModulMWS创建的 - LogoTech oHG的机器管理
容量,吨 1250 行程,mm 500 最大拉深,mm 200 最小空载行程数:14 //分钟 滑块调节,mm 315 垫板和滑块之间的最大闭合高度(行程向下,向上调 ),mm 1250 工作台尺寸,mm 1600 x 1800 滑块尺寸,mm 1530 x 1800 表格中的光圈,mm 1100 x 1100 柱间距离,mm 1600 缓冲行程,mm 200 缓冲容量,吨 200 最大推力 吨 31.5 主电机功率,kW 125 压力机外形尺寸: 5850x3100x8950 mm 冲压重量,kg 195000
Pressing force: 160t, max. sheet thickness: 14mm, stroke speed: 40-60/min, ram stroke: 20-120mm. ... 更多信息
pressure: 63 tthroat: 330 mmstroke: 8-100 mmno. of strokes: 56/84 Hub/minram - range of adjustment: 63 mmtable surface area: 850x600 mmram surface: 550x360 mmhole in the table: Ø 240 mmtable height: 800 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 4,5 tdimensions of the machine ca.: 1300x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: BBT Presses, single column eccentric press type ER 25 with safety cage -Press guard: Nilson -Clutch: pneumatic -Pressure capacity: 25 tons -Stroke rate: 50/100 strokes/min -Stroke: adjustable 12 - 80 mm -Table size: 520 x 360 mm -Projection: 190 mm -Punching fixture: Ø 30 mm -Insert height: 310 mm -Central lubrication -Dimensions: 1180/800/H1820 mm -Weight: 1418 kg
机器类型:偏心压力机 制造商: MÜLLER 型号: Amp 100 建设年份:1967 条件:非常好 报价类型: 二手机器 规格: 压缩力: 100 t 投影: 310 mm 工作台: 910 x 600 mm 安装高度: 410 mm 行程: 10 – 100 mm 推进力: 5.5 kW 备注: 气动双手和脚驱动, 每分钟 80 次冲程, 柱塞调节 60 mm, 可调冲床, 附加冲孔板 890 x 595 x 85 mm 重量: 5300 kg 该机器状况非常好,可以立即使用,我们可以查看和 示。 如果您对我们的报价感兴趣,我们将非常高兴。 错误、修改和事先销售除外
产能:800吨 滑块行程: 500 mm 每分钟冲程数 12 滑块调整: 185 mm 工作台面积: 1250 x 1650 mm 滑块尺寸 1000 x 1250 mm 主电机功率: 55 kW 柱间距离 1250 mm 压力机尺寸,mm 3800 x 2800 x 6900 重量:57 ... 更多信息
Description: lichte Weite zwischen den Säulen ca. 500 mm Neigung vor der Drehung ca. 48 km , Druckkapazität 28 Tonnentable surface area l x w : 500x400 mm, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,600 x 1,900 mm, weight approx.: 350 kg ... 更多信息
Description: Lower tabletop dimensions: approx. 720 x 720 mm Upper tabletop dimensions: approx. 570 x 560 mm Pressing force: approx. 150 toweight approx.: 8,000 kg, Approx. Onsite Dimension. (l x w x h): 2,350 x 1,600 x 3,200 mm ... 更多信息
pressure:150 tthroat:450 mmstroke:115 fix mmno. of strokes:45 /mindistance table/ram, max. stroke up, adjustment up:400 mmtable surface area:2250 x 1090 mmtable height over floor:900 mmpassage to the back:1900 mmram surface:1900 x 900 mmram adjustment:100 mmpower requirement:16,0 kWweight:19,5 tDimensions (WxDxH):3,0 x 2,3 x 3,9 m
SLIDE total force (nominal): 80 to stroke: 50 mm stroke rate (min.): 28 /min stroke rate (max.): 72 /minV-RING nominal force: 25 toCOUNTER RAM nominal force: 12 toTOOL DIMENSIONS lower table (left-right): 420 mm lower table (front-back): 420 mm upper table (left-right): 420 mm upper table (front-back): 420 mm shut height max.: 255 mmSTRIP-FEEDER feeder type: roll feeder sheet width max.: 180 mm sheet thickness max.: 5 mmDIMENSIONS / WEIGHTS space requirements -left/right-: 1700 mm space requirements -front/back-: 2420 mm total height: 2420 mm total weight approx.: 6000 kgATTACHMENTS -FINEBLANKING PRESS- decoiler: optional leveller unit: optional
注:另外一个新轴 描述 力 , 4000 TN 滑动行程,mm 400 连续滑块行程数,行程/分钟 50 冲压空间闭合高度 mm 1000 调整工作台 mm 15 光照下柱间距离,mm 1660 驱动功率,kW 185 工作台尺寸(平面毫米): - 1620年从左到右 - 1570年的从前到后 尺寸(毫米): - 在计划中 6100 x 4710 - 楼层以上高度6820 - 冲压高度 8680 重量,t 377
行程末端冲压力: 2000 t 滑块行程: 200 mm 每分钟滑动行程数:17 调整冲压空间:15 mm 工作台和滑块在下部位置的最大距离:830 mm 日光下导轨之间的距离:1040 mm 垫板尺寸: -从正面到背面:1300 毫米 -从右到左:1270 毫米 桌子开口尺寸 - 直径:130 mm 幻灯片尺寸: -从前面 - 到后面: 800 毫米 -从右到左:1250 毫米 主电机: -类型: АС 82-4 -功率: 55 kW -转速: 1380 电机调整: -类型: АО 52-6 -功率: 4,5 kW -转速: 950 冲压重量: 75107 kg
压力:25吨喉咙:/毫米行程:/毫米推力:25t压力机尺 寸 长度:500mm深度:1000mm高度:2100mm工作台尺寸450x300mm ... 更多信息
压力: 63 t投影: - mm行程: 16 - 125 mmgr. 距离工作台 - 闸板: 417 mm闸板调整: 70 mm冲程速率: 连续运行 80 冲程/分钟工作台表面: 800 x 630 mm冲压面积: 500 x 400 mm夹紧板厚度: 70 mm总功率要求: 6 kW机器重量 约: 5.5 t空间要求约为: m- 可倾斜- 柱塞配有破损板保护- 工作台夹紧板 - 通过棘轮进行闸锤调节- 巴鲁夫凸轮开关设备机对于手动插入操作是不安全的 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理
pressure:160 tthroat:400 mmstroke:30 - 200 mmno. of strokes:50 /mindistance table/ram, max. stroke up, adjustment up:600 mmtable surface area:1000 x 770 mmtable height over floor:810 mmhole in the table:360 mmPassage to the back:450 mmram surface:710 x 450 mmram adjustment:110 mmpower requirement:15,0 kWweight:10,5 tDimensions (WxDxH):1,7 x 2,0 x 3,2 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:hydraulic overload protection in ram:mechanical ram counterbalance:pneumatic
pressure: 63 tthroat: 280 mmstroke: 8-100 mmram surface: 310x260 mmtable surface area: 620x500 mmhole in the table: Ø 250 mmno. of strokes: 56/84 Hub/minram - range of adjustment: 63 mmweight of the machine ca.: 4,0 tdimensions of the machine ca.: 1200x1900x2800 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
压制力:250 t主轴直径:160 mm柱塞行程范围:180 mm提升速度:71 冲程/分钟支架通道:450 mm工作台面:560x450 mm冲压面积:450x400 mm总功率要求:12 kW机器重量约:9 t空间要求约:m技术数据是制造商或操作员的规格, 此对我们无约束力。我们保留进行事先销售的权利, 我们的业务和销售条款和条件仅适用。关于我们 超过400台自有机器在仓库超过8500平方米的存储区域, 起重机容量70吨以上超过1000件配件为您的车间如果您 出售机器生产线或您的公司,请与我们联系。该广 的数据是使用模态MWS创建的 - 标识科技oHG的机器管理
编号 : 7047 型号: HSP 600 AZ-RN a 导演: 布伦胡伯 创建时间:1969年 参数: 压缩力: 610 t ... 更多信息