子类目
(三级类目)
生产厂家:
(品类: 106)
Pressure:600 tdistance between columns:2600 mmstroke:900 mmDistance table/ram, max. stroke up, adjustment up:1600 mmTable surface area:2500 x 1730 mmpressure of drawing cushion in table:250 tDie cushion stroke in table:400 mmDie cushion area in table:2300 x 1300 mmDie cushion pressure in ram:63 tDie cushion stroke in ram:160 mmDie cushion area in ram:1900 x 1300 mmRam surface:2500 x 1730 mmSide window:1100 mmOil volume:3500 lPower capacity:200,0 kWDimensions (WxDxH):4,1 x 2,8 x 9,6 mHeight above floor:6,4 mdie cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable cutting impact absorption:hydraulic
FEINTOOL GKP F 100T精冲压力机于1974年在瑞士制造。该机床以其坚固 稳定的设计而著称,可以在一个精确的工艺中执行多 个苛刻的加工步骤,从而节省时间和劳动力。因此, 大厚度为 6 mm 的工件可实现极其均匀的表面和精确定义的边缘,这 其他机床无法实现的。当FEINTOOL GKP F 100/160液压落料机加装钣金送料器时,加工过程可以完 全自动化。机器的总重量约为 9 吨。 FEINTOOL GKP F 100T液压机的技术参数 - 最大工件厚度:6 mm - 最大钣金宽度:210 mm - 包括辅助功能在内的总推力:160 t - 剪切力: 100 t - 液压配重力(上工作台):1-40吨 - 环钳口(下台)液压力:12-50 t - 顶出力(泵压力):4-8 t - 最大滑块行程数:72/min - 最小滑块行程数:18/min - 行程速率无级调节 - 收集 ...
机器类型:液压双柱压力机 制造商: HYDROMAK 型号: P250T 建造年份:1974 条件:非常好 产品/服务类型:二手机器 规格: 压缩力: 250 t 投影:620 mm 通道 工作台: 610 x 610 mm 安装高度: 385/515 mm 推进功率: 7.5 kW 备注:双手和脚释放 重量: 3200 kg 该机器状况非常好,可以立即使用,我们可以查看和 示。 如果您对我们的报价感兴趣,我们将非常高兴。 错误、修改和事先销售除外
规格: - 最大压力 40 t - 最大滑枕行程 500 mm - 提升速度 0 - 40 毫米/秒 - 返回 0 - 200 米/分钟 - 安装高度 750 mm - 投影到柱塞中间 360 毫米 - 对接夹紧面 440 x 360 mm - 柱塞夹紧销 40 mm - 台面尺寸 630 x 500 mm - 工作台孔/开口:200毫米 - 台面以上高度 710 mm - 注油量约 300 升 - 驱动 400 V / 4 kW - 大约需要空间 宽 1200 x 高 2800 x 深 1600 mm - 约重 2500 公
Working length: 3500mm, the pressure bar of the machine must be realigned. ... 更多信息
Hand screw press, arbor press, screw press, hand screw press, compression press, balance compression press-Manufacturer: Kalisz, manual screw press type YB-1 with solid base-Pressure: max. 10,000 kg-Stroke: 200mm-Intermediate size: 320 mm-Spindle holder: Ø 20 mm-Table size: 290 x 250 mm, slot width 14 mm-Dimensions: 1160/860/H1750 mm-Total weight: 350 kg
Description: - Control: conventional - Pressure: 125 t - Throat: 400 mm - Stroke: 6 - 160 mm - Total power requirement: 11 kW - Number of strokes: 60 Strokes/min - Installation height: 525 mm - Ram adjustment: 100 mm - Ram surface: 800 x 550 mm - Table surface: 1100 x 750 mm - Drain opening in Table: 400 mm - Stand passage: 740weight approx.: 9,000 kg, Approx. Onsite Dimension. (l x w x h): 2,600 x 1,900 x 3,300 mm
压力: 15 T喉部: 160 mm 行程: 6 - 60 mm 柱塞调节: 60 mm 行程数: 120 轮毂/分钟工作台高度调节: 150 mm 工作台表面积: 500 x 350 mm 柱塞孔: 30 mm总功率要求:kW机器重量 约:850公斤机器尺寸: 0,75 x 0,85 x 1,75 m ... 更多信息
坠落部件的标称质量,考虑到上印章的质量(500公斤 ,公斤5000 不带顶部印章的坠落部件的实际质量,千克。5030 完全连续冲击时坠落部件的有效动能,kgc m 12500 女性最大工作行程,mm. 1300 无柄模具的最小高度,mm. 400 导光板之间的距离,mm 800 女人在垂直于锤子前部方向上的长度,mm. 1180 进入气缸前的蒸汽(空气)压力,大气压7-9 上模的标称质量,kg 500 上模的最大质量,kg。1500 最高允许蒸汽温度,⁰C 200 重量145-148吨, 砧块重量75+22吨
容量:10吨, 下落件重量,无上部下落件公称质量:9吨, 吹气后有效工作动能:25000公斤米, 最大工作柱塞行程:1400 mm, 最大打击次数 : 30/分钟 , 滑块之间的距离 : 1000 mm, 闭合高度 : 775 mm , 滑枕尺寸从前到后:1200毫米, 从前到后的垫子尺寸:1200 mm, 气压 : 7-9 MPA , 乐器高度 : 450 分钟, 模具支架从前到后的尺寸:1400 mm, 地高: 7270 mm, 锤子尺寸 : 4400x10420x2700 mm, 重量(减少砧块):73.5吨, 砧块重量:203.8吨
容量,吨 1250 行程,毫米 500 最小空载行程数:8 /每分钟 滑块调节,mm 215 垫板和滑块之间的最大关闭高度(向下行程,向上调 ),mm 860 工作台尺寸,mm 1600 x 1850 滑块尺寸,mm 1300 x 1400 工作台间隙尺寸,mm 1100 x 1100 柱间距离,mm 1630 滑块之间的距离,mm 1580 缓冲行程,mm 200 缓冲能力,吨 200 主电机功率,kW 90 压机重量, kg 130000
气蒸汽模锻锤: 容量 : 16 吨, 跌落件的标称质量: 16000 kg, 冲击能量 : 400 KJ, 滑枕行程 : 1500 mm, 冲压冲程/分钟 : 20, 导轨间的净距 : 1180 mm, 从前到后的滑枕尺寸: 1500 mm, 从前到后模架尺寸: 1600 mm, 底模压距: 500 mm, 蒸汽/空气压力 : 0.7-0.9 兆帕, 上覆尺寸 : - 占地面积 : 4500 x 2450 mm, - 地面以上高度 : 7920 mm, 铁砧块质量:325吨, 锤子总重量:425吨
Description: Serial no.: 058-005/9 Nominal force: 160 Np Operating pressure: 144 kg/cm² Plunger stroke: 500 mm Projection: 380 mm Maximum distance between table and ram: 800 mm Downward speed: 200 mm/s Trunnion Ø: 40 mm Installation height: 300 - 800 Upwards speed: 250 mm/s Table size: 900 x 630 mm Plunger surface: 530 x 400 With deep-drawing device under the worktop Additional equipment: 2-hand operation, additional ram 250 x 200 Caution: Stand cracked and secured with frame.Max. pressing force: 160 to, weight approx.: 7,500 kg, Approx. Onsite Dimension. (l x w x h): 2,400 x 1,400 x 3,600 mm
pressure:063 tthroat:250 mmstroke:8 - 100 mmStroke rate:47 - 140 / minDistance table/ram, max. stroke up, adjustment up:415 mmTable surface area:710 x 480 mmHole in the table:280 / 250 mmTable height above floor:800 mmPassage to the back:290 mmRam surface:450 x 280 mmRam adjustment:63 mmWeight:4,0 tDimensions (WxDxH):1,5 x 1,6 x 2,7 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 infinitely variable drive:PIV clutch:pneumatic overload protection in ram:mechanical
压力:125 t投影:400 mm行程:6-125 mmRam 调整:100 mm安装高度:400 mm工作台面:1100x750 mm行程速率:60 冲程/分钟安装高度:525 mm总功率要求:14 kW机器重量 约:9.0 t空间要求约:WxDxH 1500x2200x3500 mm冲程率 单冲程 24 冲程/分钟 -- 耐力运行 60 冲程/分钟润滑脂 中央润滑气室离合器制动器组合补偿圆柱形双手和脚 作附加制动器液压过载保护本广告的数据是使用Modul MWS创建的 - 徽标科技oHG的机器管理
公称力:6300吨 每分钟连续冲程数:40 滑枕行程: 460 mm 柱塞和工作台之间的距离(工作台位于上部位置):1 150 mm 工作台调整: 15 毫米 压柱之间的距离: 1950 mm 滑枕尺寸: -从前到后: 1680 毫米; -从左到右: 1680 毫米 工作台尺寸: -从前到后: 1950 毫米; -从左到右: 1920 毫米 机械上部顶出器: -最大行程: 100 毫米; -位置数:1 -行程调整步骤: 25-30-75 毫米 -力: 30 吨 气动下部喷射器: -最大行程: 300 毫米 -无级行程调节: 15-300 mm -职位数:3; -力: 65 吨 侧窗尺寸: -宽度: 1100 毫米; -高度: 1280 毫米 主电机:400/590千瓦/转 印刷机布局尺寸: 6300x8965 mm 总高度: 11125 mm 地上高度: 9150 mm 总重量: 626100 kg
pressure:100 tthroat:450 mmstroke:170 mmdistance table/ram, max. stroke up, adjustment up:450 mmtable surface area:3220 x 800 mmtable height over floor:850 mmram surface:3220 x 800 mmspeed down:50 mm/sspeed up:150 mm/sworking speed:7 mm/soil volume:600 lpower requirement:20,0 kWweight:16,0 tdimensions (WxDxH):3,7 x 2,5 x 2,6 m
pressure:500 tdistance between columns:1220 mmstroke:600 mmdistance table/ram, max. stroke up, adjustment up:1000 mmtable surface area:1600 x 1200 mmpressure of drawing cushion in table:320 tstroke of drawing cushion in table:150 mmdrawing cushion surface in table:750 x 625 mmpressure of drawing cushion in ram:180 tstroke of drawing cushion in ram:100 mmdrawing cushion area in ram:750 x 625 mmram surface:1600 x 1200 mmtable height over floor:800 mmspeed down:665 mm/sspeed up:530 mm/sworking speed:34 - 100 mm/squantity of oil:2000 lpower requirement:180,0 kWweight:40,0 tDimensions (WxDxH):3,2 x 2,4 x 7,5 mDepth of foundation pit:4,1 mHeight above floor:5,55 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2
Pressure:200 tdistance between columns:1910 mmstroke:600 mmdistance table/ram, max. stroke up, adjustment up:800 mmtable surface area:1900 x 1150 mmpressure of drawing cushion in table:80 tstroke of drawing cushion in table:300 mmdie cushion area:1500 x 950 mmtable height over floor:800 mmside window:1000 mmram surface:1900 x 1100 mmreturn capacity:36 tspeed down:400 mm/sspeed up:170 mm/sworking speed:30,5 mm/soil volume:1500 lheight over floor:4,85 mheight beneath floor:2,6 mpower requirement:45,0 kWweight:38,0 tdimensions (WxDxH):3,05 x 2,8 x 5,55 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic