子类目
(三级类目)
生产厂家:
(品类: 104)
Grinding disk diameter: 600mm, controls: Siemens S7, with documentation, was maintained regularly, an inspection is possible. ... 更多信息
钻头直径:32 mm钻头直径:32 mm钻头长度:0 mm钻头长度:0 mm尖端角度:尖端角度:总功率要求:kW 总功率要求:kW机器重量约:t 机器重量约:t空间要求约:m空间要求约:m带许多附 的通用钻头磨床本广告的数据是使用ModulMWS创建的 - LogoTech oHG的机器管理
Description: Machine number: 1999 Grinding wheel diameter: approx. 100 mmApprox. Onsite Dimension. (l x w x h): 500 x 400 x 400 mm, weight approx.: 70 kg ... 更多信息
建设年份: 1981 翻新时间:2016 年 最大筛分: 300 mm 最大磨削长度: 750 mm 外圆磨削主轴驱动:5.5 kW 外圆砂轮:左 外圆砂轮尺寸 xWx孔径 尾座:手动 尾座安装锥:MK4 尾座最大行程: 40 mm 工件主轴箱:MK4 工件主轴孔径: 24 mm 最大刀尖之间的工件重量: 200 kg 最大飞行工件重量: 50 kg 工件主轴转速:32-500 min-1 用于砂轮平衡的频闪灯:1个。 砂轮法兰:div. 外圆砂轮:各种 带泵带式过滤器:400 l 磁吸盘:200 mm 三爪卡盘:160 重量约: 3.700 kg 工作电压:380V/50Hz 空间要求 LxW 约 3,420x2,155x1,700 mm 所有信息均不具约束
最大长度行程约 680 mm 横向行程最大约 250 mm 最大工作台 – 主轴中心约 525 mm 磁性尺寸约 600 x 200 x 90 mm 光盘尺寸 300 x 50 x 76.2 mm 转速无级可调 1000 -3000 rpm 尺寸 , 宽 x 深 x 高 约 3.2 x 1.8 x 2.5 m 主轴电机约 2.8 – 8.4 kW 机器重量约 3.3 吨 设备: - 自动垂直输送 - 粗加工,爬行,烧制和通过可调节的罐子起飞 - 研磨后自动启动加载位置 - 通过电动机快速移动约1.2米/分钟 - 工作/快速移动长度约 5 mm/min – 40 m/min,通过伺服电机和同步带驱动 - 快速垂直移动约0.2米/分钟 - 横向和垂直轴的数字显示 - 快速提升装置约180色度/分 - 带尺寸和速度补偿的电动直床单 - 带粘接力调节和消磁装置的电磁夹紧板 - 垂直轴电动手轮 - 通过按钮在控制面板上设置桌子反转点 - 通过 ...
The machine is in good technical condition. Max. grinding diameter: 605 mm Max. workpiece diameter: 630 mm Spike distance: 5000 mm Maximum workpiece weight: 3000 kg Machine weight: 18000 kg By prior arrangement, the possibility of a tour in progress. ... 更多信息
编号 : 7411 型号:R6-5000 导演: 科尔布 创建时间:1981年 参数: 磨削直径: 605 mm 工件最大重量:3000公斤 烙铁头间距: 5000 mm 机器重量:17900公 ... 更多信息
齐尔施 & 巴尔特鲁施 URS400 人体工程学 建设年份: 1981 尖端高度:100mm 中心宽度:400mm 可磨长度 - 最大工作台行程:320mm 工件直径:198毫米 工件主轴箱速度:90-900rpm 高速磨削主轴:1.800-1.970-2.173U/分钟 最大砂轮直径:350mm 最小砂轮直径:250mm 砂轮最大宽度:50mm 砂轮缸径:127mm 尺寸:1,5x1,3x1,65米 重量:约1.6吨 千分尺止动器 1转千分尺主轴:0.2mm 1个刻度线的千分尺主轴:0.01mm 在机器上,更新了导轨,更新了工作台,更换了所有 承
grinding length:1250 mmgrinding width:500 mmClamping area:1720x400 mmweight of the machine ca.:5200 kgdimensions of grinding wheel:400x40x127 mm ... 更多信息
机器详情 1105-02942 机器类型 平面磨床 - 卧式 做 坐 类型 R4 加州 建造年份 1981 控件类型 协定的 存储位置 法国 原产国 德国 交货期 马上 货运基地 出厂时 价格 根据要求 技术细节 磨削长度 450 毫米 研磨宽度 180 毫米 工件高度 300 毫米 总功率要求 9 千瓦 信息 最大磨削长度 500 mm 工作台行程最大 600 mm 最大磨削宽度 180 mm 工作台尺寸 600 x 300 mm 砂轮下的工作高度 500 mm 磨头垂直行程 300 mm 垂直输送 0.001 - 0.06 mm/冲程 横向磨削滑块调整 200 mm 砂轮尺寸 400 x 150 x 305 mm 砂轮速度稳定47 - 970 转/分 工作台承重.600 kg 工作台提升速度最大 30 米/分钟 磨削主轴驱动 12 kW 总驱动功率约 20 kW - 380 V - 50 Hz 重量约 2,000 kg 英制磁铁盘 500 x 300
夹头大口径:17.5 mm 待砂角半径: 10 mm 杯盘直径: 100 mm 杯轮转速:约 2500 rpm 驱动电机:380 V,0.25 kW 尺寸:550 x 450 x 1270 mm ... 更多信息
Intern feeder, Automatic feeder with Allen Bradley PLC, MARPOSS process measurement equipment / Automatic feeder with Allen Bradley PLC, Team process measurement MARPOSS, Internal inter-regulation, Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Diamond dressing speed: 255 r.p.m., Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 0.37 kW, Total power: 65 kW, Voltage: 220 / 380V, Long: 2.300mm, Width: 2.800mm, High: 2.100mm, Weight: 15.000 kg, Accessories included: Intern feeder, automatic feeder with Allen Bradley PLC, MARPOSS process measuremen ...
Working width: 500 mmWorking height: 50 mmNumber of sanding units: st.Feed speed: m/min.Motor power per sanding unit: ...x...kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... 更多信息
Engine power: 125kW Table surface: 2000x800mm Speed: 600min/-1 Max. table load: 1000kg Machine dimensions: 7900x3410x33OOmm ... 更多信息
grinding diameter:600 mmgrinding length:3000 mmcentre height:315 mmworkpiece weight max.:3000 kgwork piece spindle speed:8 - 120 U/mingrinding wheel motor:25 kWgrinding wheel speed:45 m/secgrinding wheel width x diameter:750 x 80 mmtable speeds:30 - 4500 mm/minfeeds of grinding head:0 - 5 mm/mintable swivelabel +/-:7,5 °total power requirement:55 kVAweight of the machine ca.:18 tdimensions of the machine ca.:11,5 x 4 x 2,2 m- Internal grinding device- taper grinding up to 10,1° based on diameter- automatic grinding cycle- grinding wheels and flanges- dressing device- coolant attachment- dust exhauster, various steady rests
圆盘尺寸: ø 315 mm x 40 mm, 孔径 75 mm 电机功率: 1.1 kW 重量,大约: 270 公斤 尺寸(宽 x 深 x 高),约 980 x 600 x 1210 毫米 设备: - 5 新光盘 ... 更多信息
钻头直径:3-40 mm钻头长度:500 mm尖端角度:15 - 75 总功率要求:4.1 kW机器重量约:1.5 t空间要求约:1.80x1.60x1.40 m本广告是使用ModulMWS创建的 ... 更多信息
钻头磨床3-50mm。90° - 140° , 自由角度和研磨方式可自由调节, T 810 / W 570 / H 1260mm , 120kg ;380 V/ 50Hz ; ... 更多信息
磨削直径 250 mm 磨削长度 650 mm 中心宽度 700 mm 尖端高度 125 mm 砂轮直径 400/450 mm 砂轮宽度 50/80 mm 工件主轴转速可达 675 1/min 工件主轴箱旋转 +/- 45 ° 梳妆台 测量装置 冷却液系统 砂轮 ... 更多信息
Max. wheel diameter : 300 mm Gear width : 180 mm Max. module : 5 Min. module : 0,5 Max. table load : 50 kg Number of teeth : 7-256 Max. helix angle : +/-45° Max. diameter of grinding wheel : 350 mm Turning speeds : 1100-1900 U/min ... 更多信息