二手 HM 出售

: gebraucht : 1999 : 8293 : prompt, Zwischenverkauf v : 27800 € : 1 : 2520 mm : 5 mm : 155 ° : 4+1,5 kW : 3950 mm : 830 mm : 1520 mm : 4975 kg min. Clamping width between upper and lower beam 60 mm Lifting height of upper beam 200 mm Height adjustment/transmitting of the lower beam 60 mm Height adjustment/transmitting of thebending beam 60 mm Bending angle / stepless 0-135° Extended bending angle 0-155° Bending speed 4,77 U/min Lifting and lowering speed of the upper beam 4,5 mm/s Working cycle 90° bending 10 s Motor upper beam 2,2 kW Motor bending beam 5,5 kW Foot pedal Flat rail 45°, Split goat foot rail Height 100 mm Length 2105 mm, Radius rail R 33 mm, Bending beam rail 20 mm, Attachment rail 15 mm, Attachment rail 35 mm, 20 Stk. Replacement break plates User manual in german with Declaration of conformity The data for this ad was created with ModulMWS - the software solution ...

板材宽度：1020 mm 板材厚度：2.75 mm 400N/mm² 开口宽度：45 mm 弯曲角度 最大： 0 - 135 机器重量约：285 kg 描述： 带专利液压辅助缸和 遥控器的旋转弯曲机。该机器可手动操作（对于较薄� ��板材）和 电动操作（对于厚板）。电动功能通过 带紧急停止的遥控器进行操作。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。

sheet width: 2100 mm plate thickness: 3.0 mm thickness at Niro-steel: 1.5 mm blade length: 2110 mm no. of strokes: 34 Hub/min back stop - adjustable: 1000 mm cutting angle: 1.5 ° work height max.: 880 mm Control: DIGI engine output: 6.25 kW weight: 2650 kg range L-W-H: 2750 x 2350 x 1550 mm Machine from a maintenance workshop maintained condition () Furnishing: - robust electro-mechanical sheet metal shears - Machine body in a closed design as an all-steel welded construction - heavy / robust drive motor (5.5 KW) - electro-motorized backgauge, including digital control unit Adjustment range max. 1.000 mm Input of target / actual value possible - manual cutting gap adjustment, adjustable from the front - 1x table side stop - Ball rollers in the support table - 1x freely movable foot switch, including EMERGENCY stop button - front finger protection - original instruction manual Machi ...

输送带宽度：150 mm 皮带长度：2000 毫米 皮带速度：34.0 毫米/秒 研磨宽度：530 Plantisch mm 工作台高度：475 - 1240 毫米 总功率要求：3.0 / 4.0 千瓦 机器重量约：115 千克 尺寸 L-B-H：mm 设备： - 集成抽排 装置- 电机制动器 - 工作高度 可调 - 由Plexiglas 角制成的 隐私屏幕 - 带零电压触发 的电机保护开关 - 自调节皮带张力 - 强大的电机4.0千瓦 吸嘴 包括：集成吸力 数据fü，此广告是用ModulMWS创建的 - LogoTech oHG的机器管理。

width of the strips: 75 mm band length: 2000 mm band speed: 34,0 mm/sek grinding width: 530 Plantisch mm table height: 475 - 1240 mm total power requirement: 3,0 / 4,0 kW weight of the machine ca.: 100 kg range L-W-H: 500 x 1010 x 1000 mm Description: The belt sander models TAS 75 and 150 are powerful Quality machines, built according to the strictest environmental and Safety regulations. The belt sanders are standard with motor brake, adjustable working height, eye protection, Angle stop and motor protection switch with zero voltage release built. The low-noise machine with CE mark is suitable ideal for grinding all metals. Furnishing: - engine brake - adjustable working height - Plexiglass privacy screen - Angle stop - Motor protection switch with zero voltage release - self-adjusting belt tension - Powerful engine 3.6 kW - suction nozzle including: integrated suction The data for  ...

sheet width: 2540 mm plate thickness: 4,5 mm ST thickness at Niro-steel: 3,0 mm VA bending angle max.: 0 - 135 ° daylight opening: 100 mm back stop - adjustable: 70 - 600 mm total power requirement: 5,5 kW weight of the machine ca.: 6275 kg dimensions of the machine ca.: 3900 x 1700 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control Software with 40 programs and up to 50 steps 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek The dat ...

sheet width: 2035 mm plate thickness: 4,5 mm ST thickness at Niro-steel: 3,0 mm VA bending angle max.: 0 - 135 ° daylight opening: 100 mm back stop - adjustable: 70 - 600 mm total power requirement: 5,5 kW weight of the machine ca.: 4145 kg dimensions of the machine ca.: 3300 x 1550 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control Software with 40 programs and up to 50 steps 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek The dat ...