技术细节 机器型号:WS 450 制造年份: 1959 CSH开始运营的年份:1986年 尺寸 所需空间:12 x 5 m。 中心间距:5米(196英寸) 直径 新石材的最小工作直径:50 毫米(2 英寸) 新石材的最大工作直径:900 毫米(35 英寸) 工作板的最大允许重量:14.000 kg。 石头 尺寸:750 x 80 x 305毫米。 转速: 350 ̴700 rpm 驱动头 主轴转速: 6 - 18 转/分 16 - 48 转/分 纵向托架进料 饲料: 范围 1:40 - 400 毫米/分钟。 范围 2:265 - 2650 毫米/分钟 快速移动:2650毫米/分钟 磨削的切削进给率控制 快速移动:175/350毫米/分钟 精细切割调整:1刻度 冷却装置 油箱中液体容量:约3586
数量 1 台二手卷车床 型号: WD-700 建造时间: 1952 1990年由霍施-MFD全面检修 中心高度: 600 mm 转弯长度: 2750 mm 2 轴数字显示 – MFC.: 微型向导 纵向驱动 静磁转矩: 14 Nm 额定转速: 2500 RPM 进料范围:5 – 100 毫米/分钟 快速速度:2500毫米/分钟 普通驱动 静置扭矩: 14 Nm 额定转速: 3000 RPM 进料范围:5 – 100 毫米/分钟 快速速度:2500毫米/分
Description: SPECIFICATIONS Character: Hercules Type: BO 230 Year built: 1967 Pipe roll diameter: ø290 mm Outer diameter: ø130 mm With various attachments weight approx.: 2,200 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,200 x 1,800 mm
grinding diameter: 915 mm grinding length: 3200 mm swing diameter: 915 mm grinding diameter - min.: 0 mm centre height: 450 mm centre distance: 3200 mm grinding wheel size: 750 x 305 x 80 mm max. workpiece weight between centres: 8000 kg grinding wheel turining speeds: 40 - 1500 U/min number of turns of spindle head: 6- 45 U/min grinding motor: ca. 30 kW electrics - voltage/frequency: 380 / 50 V/Hz total power requirement: 60 kW weight of the machine ca.: 40 t dimensions of the machine ca.: 12,0 x 5,0 x 2,5 m Machine reconditioned and modernised to Siemens Sinumerik S7 in 1998, including reconditioning of grinding wheel motor. Machine raised from 750mm dia. to 915mm dia in 2016. - Various Steadies - Coolant & Clarifier - Balancing Stand - Sony DRO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
车床转弯直径:920 mm 通过支架的转弯直径:600 mm 转弯长度:12000 mm 以mF为单位的负载能力:20吨 速度范围:3.6 - 172 rpm 电压:380 V 总功率要求:90 kW 机器重量约:t 空间要求约:m 本广告的数据是使用ModulMWS创建的 - LogoTech oHG的机器管理。
Center height: 450mm, maximum turning diameter: 700mm, maximum turning length: 4000mm, chuck range for the four-jaw chuck: 100 - 700mm, additional clamping cartridge span range: 500mm, spindle speed ranges: 8, adjustable from 1 to 75 rpm, feed rates: continuously adjustable from 1 to 200mm per minute. The feed drives were upgraded in 2009 to Siemens 1FK7, including all necessary electrical work, which allowed for the elimination of the PIV feed gearbox. An on-site inspection is possible.
圆形:200毫米 正方形:1500毫米 平板:2500毫米 边平角:1500毫米 角度:320毫米 (1)水平/(2)垂直:2 水平和垂直地平线 轴 200 mm 卷筒数3 行程 X 轴320 毫米 容量扁平95 x 95 x R = 2500 mm 容量管133 x 6 x R = 1500 x mm 容量 T 型型材120 x R = 1500 mm 容量 HEA 型材120 x R = 1500 mm