二手 GLEASON 出售

最大工作直径 660,4 mm 模块最大 16,9 工作宽度 106,7 mm Min. max没有。牙齿数 20 - 75 机器重量 17700 Kg 配备 分度盘 刀盘 轨距 刀片设置装�

圆锥刀磨刀机 品牌 ： 格里森 型号 ： 104

出售格里森创世纪130 H的二手铣�

max. wheel diameter:275 mm gear width:58 mm max. module:8 min. module:0,5 weight of the machine ca.:10 t max. number of teeth:200 min. number of teeth:5

Description: Spiral bevel gear cutter head make: Gleason type number: C9S10RH Technical details Diameter 235 mm Number of cutting edges: 12 pieces Equipped with 6 knives. Further information Cutter head for Gleason machines No: 7 + No: 16 + No: 26 for spiral bevel gears Approx. Onsite Dimension. (l x w x h): 235 x 235 x 60 mm, weight approx.: 15 kg

max. wheel diameter: 215 mm gear width: 40,65 mm max. module: total power requirement: 20 kW weight of the machine ca.: 10 t Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. Extensive coolant equipment with filter system, band filter, etc. Driv ...

max. wheel diameter: 1010 mm gear width: 0 mm max. module: min. module: total power requirement: 15 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: m Max. depth of tooth 10 mm Max. workpiece Ø (for clearance) 1,010 mm Max. external Ø of coupling 610 mm Sliding base withdraw 216 mm Max. distance from grinding wheel to workpiece nose 90 - 430 mm Max. weight of workpiece, including clamp 500 kg No. of teeth 32 to 150 Grinding wheel Ø, approx 152 - 320 mm Grinding wheel speeds, infinitely variable 0 - 3,600 rpm Work spindle bore 60 mm Total electrical load, approx. 15 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features Automatic roughing and finishing process via pre-settable counter and built-in feed cam. Counter for number of teeth. Counter for number of dressing cycles. 2 built-on dressing units with three dressing diamonds for radiu ...

max. wheel diameter: 400 mm gear width: 0 mm module: pinion diameter - max.: 254 mm axial cross angle: 90 ° total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m This machine is very suitable for precision production testing of spiral and hypoid bevel gears with shaft angle 90°. The gear spindle is vertical and the pinion spindle is horizontal. The pinion cone distance can be adjusted while the machine is working in order to find the optimal mounting position whereby the gear is loaded with a preset torque. The axial pinion position can be adjusted until the quietest meshing position of the traction flank is found. Likewise, the thrust flank can be tested during the return run. Marking compound is sprayed on both sides of the teeth so the flank contact pattern can be seen. Working cycles, as well as the positioning in the tooth gap, are automat ...

number: 20 tool adaptor: 55 diameter: 9 Zoll total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Type Nr.30212024, F-Nr.F746550002933, Anz. Messer 20, Anz. d. Messerköpfe a. Lager 9 Type Nr.30212025, F-Nr.F746550002934, Anz. Messer 20, Anz. d. Messerköpfe a. Lager 18 Type Nr.30212026, F-Nr.F746550002935, Anz. Messer 20, Anz. d. Messerköpfe a. Lager 25 Type Nr.30212027, F-Nr.F746550002936, Anz. Messer 20, Anz. d. Messerköpfe a. Lager 1 Type Nr.30212006, F-Nr.F746550002939, Anz. Messer 12, Anz. d. Messerköpfe a. Lager 19 Type Nr.30233008, F-Nr.F746550299197, Anz. Messer 22, Anz. d. Messerköpfe a. Lager 2 Alle Werkeuge 9 Zoll The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

直径： 235毫米 刀数：12 z= 工具适配器：12 斯图克

Weight: 10t, was maintained regularly, without cooling system, an on-site inspection is possible.

Weight: 10t, was maintained regularly, without cooling system, an on-site inspection is possible.

Manufacturer Gleason Model Pfauter P 200 G Year 1999 Machine is in good condition