二手 GEHRING 出售

编号 ： 6549 型号： KS 1800-10 制片人：盖林 生成： 参数： 珩磨直径： 10 毫米 加工长度： 1800 mm

honing diameter:63 - 180 mm stroke:15 - 600 mm throat:xxx mm stroke speed:0 - 24 m/min distance table - lower edge spindle:1545 - 2145 mm spindle speeds::24 - 128 1/min. spindle diameter:75 mm feed:EMZ-F/HAZ Do 80 dimensional control:Marposs GCU/AP11 Verticval Honingmachine - machined Cyliner Liner - out of OEM Line. NC Control GEHRING II, Siemens S7-300 SPS 2003 retrofit

honing diameter:90 mm stroke:600 mm ConRod

honing diameter: 40-420 mm stroke: 15-6500 mm centre height: 520 mm workpiece length: 6500 mm workpiece dia.: 1000 mm steady: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 160 mm stroke: 3025 mm centre height: 325 mm workpiece length: 3000 mm workpiece dia.: 600 mm steady: spindle drive: 32-250 U/min stroke speed: 0-20 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 12 mm stroke: 40 mm throat: mm total power requirement: 15 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m 3 spindle honing machine with in process measuring The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 80 mm stroke: 280 mm throat: 300 mm total power requirement: 6 kW weight of the machine ca.: 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. Hydraulic infeed of the tool. Switch-off via timer. Air measuring device (probably). Honing oil unit. Various splash shields, etc. Condition : Good. Machine can be in ...

珩磨直径：5-10 mm 行程：40 mm 投影：mm 总功率要求：kW 机器重量 约：t 空间要求 大约：m 2工位 回转台 此广告是用ModulMWS创建的 - LogoTech oHG的机器管理。

珩磨直径：125 mm 行程：350 mm 投影：mm 总功率要求：kW 机器重量约：t 空间要求约为：m 一个夹紧 预珩磨和成品珩磨的双重膨胀 用于 珩磨4缸 的装置 机床目前不满足BerrSichV 2015中提到的基本安全和保护要求。 必须根据BetrSichV进行风险评估，以确定所需最低保护� ��标的增加。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。

珩磨直径： 24-160 mm 行程： 500 mm 喉部： 毫米 总功率要求： kW 机器重量 CA.： T 机器尺寸 CA.： m

Max. spindle rotational speed: 1430/min, spindle power: 1.5kW, connected load: 14kW, including documentation.

Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 2.5 mm Max. diameter: 12 mm Max. honing length: 40 mm Number of spindles: 1 Spindle speeds: from: 800 rpm up to: 4000 rpm Total stroke: 4 - 40 mm Stroke speed: from: 10 s/min up to: 450 s/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.75 kW Machine´s weight about: 1700 kg Overall dimensions machine: Length: 2000 mm Width: 1300 mm Height: 2400 mm Various accessories: Coolant system Measuring device

Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 2.5 mm Max. diameter: 12 mm Max. honing length: 40 mm Number of spindles: 1 Clamping pressure: 30 bar Spindle speeds: up to: 1600 rpm Total stroke: 4 - 40 mm Stroke speed: from: 10 s/min up to: 450 s/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.75 kW Machine´s weight about: 1700 kg Overall dimensions machine: Length: 2000 mm Width: 1300 mm Height: 2400 mm Various accessories: Coolant system Measuring device Rotary table with 4 positions Déclanchement à deux mains

Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 10 mm Max. diameter: 70 mm Max. honing length: 300 mm Spindle speeds: number (steps): 6 from: 50 rpm up to: 1200 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 3.20 kW Machine´s weight about: 2500 kg Overall dimensions machine: Length: 1200 mm Width: 1900 mm Height: 3200 mm Various accessories: Coolant system Set of arbors Set of honing stones

Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 12 mm Max. diameter: 45 mm Max. honing length: 250 mm Number of spindles: 1 Distance spindel / columns: 300 mm Table length: 1000 mm Table width: 350 mm Spindle speeds: from: 220 rpm up to: 1030 rpm Total stroke: 350 mm Stroke speed: up to: 1080 m/min Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 1900 kg Overall dimensions machine: Length: 1700 mm Width: 1500 mm Height: 2750 mm Various accessories: Active control

珩磨直径最大： 0 mm 珩磨直径 最小： 0 mm 行程长度 ： 0 mm 珩磨头数量 ： 0 CNC 品牌： 0 CNC 型号： 0 技术数据 最小直径： 25 mm 最大直径： 90 mm 最大珩磨长度： 250 mm 主轴数： 1 电压 50 Hz 3x： 380 伏 整 机尺寸： 长度：1400 mm 宽度： 1200 mm 高度： 2600 mm