制药及化妆品设备 二手 出售

用于泡罩包装机 Uhlmann UPS 4 1 个滑入式模块，带多个卡 2 根线束 将仅按原样出� ... 更多信息

S/S 中的船只 总容积容器 1,000 升 最大工作温度 143C 工作压力 -1/+3 bar 压力紧固螺钉 agitato 0,75 kW 检测玻璃 洗球 底部中心的出口 顶部检修孔 各式各样的网� ... 更多信息

称重范围最大 300 g，分辨率 e= 0.1 g，精度 +/- 200-640 mg，速度可调，称重传感器 BF 8，传送带方向从左到右，传送带宽度 120 mm，进料/称重/出口传送带轴向距离 420/260/420 mm，气动卸料，打印机，新传送带，驱动 230V/50Hz ... 更多信息

最大称重范围 6,000 g，精度 e= +/- 0.1g，最大输出 400 包/分钟，X（1） 级，S/S 型，皮带方向从左到右，气动不良排放，皮带速度可� ��，不带进料皮带，皮带宽度 360 mm，轴距称重皮带 400 mm，出料皮带 500 mm，新皮带，彩色触摸屏显示屏，称重传感器 BF 20， 高度可调，驱动 230/115 V，50/60 Hz

• For measuring of weight, thickness, hardness and diameter for connection to Kilian tablet presses or as stand-alone • Weight measurement max. 60 g, d = 0.1 mg, accuracy +/- 0.5 mg • Thickness measurement max. 12.5 mm, d = 0.01 mm, accuracy +/- 0.05 mm • Hardness measurement nominal force 500 N, max. breaking force 600 N, resolution 1 N, accuracy +/- 3 N • Diameter measurement 3 - 25 mm • Tablet feed automatically from a Kilian tablet press (feeding device not included) or manual tablet input • The recorded data is transmitted to the tablet press, the control of the tablet press then regulates according to the data • Mobile • Connection 230V/50/60Hz

Horizontal fully automatic machine for 3-edge and 4-edge sealed pouches for filling and packaging powdery products in double pouch operation (with perforation): • Format range double bags (W x H) min. (2x50) x 260 mm, max. (2x80) x 260 mm • Output max. 100 double bags/min (depending on bag size) • Screw dosing SD 70/2 for double bags • Main dosing min. / max. 2.5 - 90 g per bag • Micro-dosing min. / max. 0.3 - 5 g • Max. Roll diam. 600 mm • Core diam. 76 mm • Max. Roll width 520 mm • Gluing table with splice detection • 2 pcs. Thermal transfer printer Allen Coding 5 line cliché, individually switchable • Longitudinal and cross seam hot sealing tool, head seam hot sealing tool • Sealing stations manually adjustable • Print mark control • Tear aid with a needle • Bag inflator • Bag opening control • Filling nozzle • Trickle protection by sheet shear  ...

• For turning and grouping folding boxes with 5th flap (suspension or display flap) and transfer to downstream machine, e.g. Pester PEWO-fold stretch-banding machine. • Infeed with 5th flap at the bottom in advance • Max. grouping of 6 products, each 3 products rotated by 180° • Infeed capacity max. 140 cartons/min. • Folding box dimensions min./max. (a x w x h) 30-64 x 20-39 x 82-156 mm, other dimensions after testing • Servo controller Elau PacDrive C200 with 1x PacDrive MC-4 • Operator terminal Pester Micro-Panel 10,4 • Programmable control system • Bypass function • 2.586 operating hours • Drive 400V/50Hz

Features: • Format range 100 x 153 mm • Output max 240 Blister/min (depending on product and format) • Drawing depth max. 12 mm (max. 24 mm after conversion) • Punching station output max. 60 cycles/min. • Pre-draw max. 125 mm • Plate sealing • Forming film rigid PVC, PVC/PVDC (Alu forming optional) • Film width max. 170 mm • Film thickness 0.1-0.35 mm • Sealing film aluminum • Perforating station • Batch embossing • Forming with air pressure • Blister transfer with bad ejection • Without format parts • Connection 380V/50Hz This blister machine has been mechanically overhauled in our specialist workshop. The entire electrical/pneumatic system has been renewed. The machine control system was equipped with the latest control technology. The following parts were replaced: • PLC B+R X20 with Automation Panel 12.1 WXGA TFT, system unit PPC3100 • Serv ...

• For hard gelatine capsules • Output max. 120,000 capsules/h • Available formats for capsule sizes 00, 0, 0el, 1, 2, 4 • Available dosing rings for pellets/microfilm tablets and dosing station for powder/granules • Deionisation for static powders • Sample weight control by Sartorios balance, automatic operation, with control via PLC for MG2 dosing, regularly calibrated • Capsule hopper • Empty capsule sorting with lifting device for deformed capsules • Tricaps finished capsule sorting machine for deformed capsules • Bulk suction and powder feed via Volkmann vacuum devices with various suction lances for different products • Separate suction unit with side channel blowers • Only H1 and FDA lubricants from Klüber • Regular maintenance by MG2 and own personnel (monthly, ¼ yearly, yearly, by the hour) • Complete spare parts package for 4,000 h maintenance availa ...

• Single-sided rotary press with 43 punch stations for keyed upper and lower punches • Tool type EU 19 with EU-BB dies • Output 64,500 - 258,000 tabl./hour • Pressing force max. 80 kN, pre-pressing force max. 15 kN • Tablet diam. max. 13 mm • Tablet thickness max. 8.5 mm • Filling depth max. 18 mm depending on filling curve • Filling curves 6, 10 and 18 mm available (18 mm built-in) • Forced feeder (Fill-o-matic) for fine powder materials • Stainless steel filling funnel • Fette CAS control system • IPC press force control, Penta Hercules Medical, with separate monitor, operating system Windows NT, retrofitted in 2000 (will be sold without inspection) • Fast switch for missing tablets • Existing tool set for tablet diam. 13 mm, concave/concave, curvature radius 18 mm. • Additional unused lift cam available • Machine control PLC Eberle PLS 51 ...

• 单台轮转压力机 • 36 个冲压工位 • 上下冲头 EU-B（直径 19 mm），模具 EU-BB（直径 24 mm） • 最大压制力/预压力 80/10 kN • 片剂直径.max 13 mm • 最大填充深度 19 mm • 最大产量 264,000 片/小时 • 键控刀塔（下冲头和上冲头） • 强制送料器 • 不锈钢设计 • 无需压片工具 • HMI Courtoy 多重控制 • PLC B+R NT 44 • 驱动 400V/50Hz

• For PVC/PVDC-Alu • Output max. 50 forming cycles/min, max. 200 punching cycles/min, max. 600 blisters/min • Max. Format range (feed x width) 220 x 284 mm • Feed single cycle max. 222 mm • Feed rate multi-cycle max. 90 mm • Max. punching area lengthwise x crosswise 220 x 284 mm • Forming depth max. 12 mm • Automatic vibratory feeder 12-lane for oblong tablets/capsules • Uhlmann MC programme control • 1 tool set for oblong tablets/capsules • Drive 15kW/380V/50Hz Optional retrofit/overhaul/modernization: - PLC B + R X20 with Touch Panel PPC2100, new - Servo drives, new - Foil take-off by linear servo, new - Electric installation, new - Mechanically outdated - Pneumatics, new - Cooling, new - Protective coating, new - Varnish, new Further options: - Feeder: Brush box, directed feed e.g. SimTab or linear guidance - Format replacement acco ...

• Single rotary press with 32 punch stations • Tool type EU 19 B with BB dies (die diam. 24.01 mm) • Keyed turret for upper tools • Output 9,600 - 200,400 tablets/hour • Pressing force max. 80 kN, pre-pressing force max. 23 kN • Tablet diam. 2-13 mm • Filling depth max. 15 mm depending on pull-down rail • Pull-down rail for filling range 0.5-15 mm included (for filling range 0.5-10 mm on request at extra cost) • Agitator blade filling shoe with 2 agitator blades for granulate pressing • Upper die gravity control • Pressing force control Kilian C 30 • Fast diverter for missing tablets • Protocol printer • PLC Siemens S7-200, operator terminal Siemens OP7 • Menu language German • Without tool set • Drive 400V/50Hz

• Single rotary press with 47 punch stations • Tool type EU 19 with BBS dies (die diam. 22 mm) • Unkeyed turret • Output 28,200 - 282,000 sheets/hour • Pressing force max. 80 kN, pre-pressing force max. 20 kN • Tablet-diam. max. 13 mm • Tablet height max. 8.5 mm • Filling depth max. 18 mm depending on filling curve (filling curve 10 mm fitted) • Filling hopper with flange for docking Bohle container MCG500/900 for powder feeding • Agitator blade filling shoe (Fill-o-matic) for fine powder materials (1 spare filling shoe available) • Fast diverter for missing tablets • Korsch PHK2i Plus press force control system • Touch screen Siemens, software operating system Windows CE • PLC Siemens S7-400 • Existing tool set 2x 47 pieces for tablet-diam. 9 mm, flat/flat with facet • Drive 400V/50Hz • New cabling between control cabinet and machine (wi ...

• 悬浮液混合罐 • 有效容量约 500 l • 底座中央有 1 个搅拌器刀片，带橡胶刮水器 • 搅拌叶片转速固定18/min • 2 根固定导杆 • 底部 200 mm 侧面有 1 个排水口，带旋转阀 • 底部平坦，略微倾斜 • 驱动 380V/50Hz，3.6kW • 用 4 只脚站�

用于泡罩机上任何片剂或胶囊的专用喂料器，例如乌� ��曼UPS 1070 • 间歇运动 • 适用于各种产品形状 • 60 冲程/分钟 • 最大规格面积 295 x 285 mm • 自有控制单元，因此普遍适用于不同的机器 • 适用于Uhlmann导轨系统，安装方便 • 包括移动式运输�

• 泡罩尺寸长度 28 mm，泡罩宽度 100 mm， • 拉伸深度 12 mm • 出刀 15-90 cyles/min • Sev.用于 28 x 100 m 泡罩的工具套件，用于 0、1、2 和 4 号胶囊、片剂和补充剂（列表见图）、手动产品进料 •计数器 • IQ-OQ-法语文档 • 机器没有普通的冲孔工具，只有一把侧刀，连接380V/50 Hz 这台机器以特价提供，按原样出售，无需技术检查�

• 容器在 S/S • 总容积容器 1,100 升 • 最大工作温度 143C • 工作压力+3/-1 bar • 12x 压力紧固螺钉 • 搅拌器螺旋桨 • 检查玻璃 • 洗球 • 出口位于底部中央 • 铰链盖 • 各种网� ... 更多信息

• 容器在 S/S • 总容积容器 1,100 升 • 最大工作温度 143C • 工作压力+3/-1 bar • 压力紧固螺钉 • 搅拌器螺旋桨 • 检查玻璃 • 洗球 • 出口位于底部中央 • 铰链盖 •人孔 • 各种网� ... 更多信息

• Set up for ALU/PVC operation • Output 15-50 forming cycles/min, max. 100 punching cycles/min, max. 400 blisters/min • Format range and die-cutting area max. (feed x width) 220 x 188 mm • Drawing depth max. 12 mm • Vibratory feeder with brush box for tablets/capsules • Product inspection from underside of blister with colour camera Scanware Lynx-Spectra HR and own PLC Bachmann MX 207/DIO 248 for error carry-over (retrofitted in 2010) • Roller stand • Perforating station • Film monitor • Bad ejection • Ejection counter control • Vacuum pump • Waste cutter • Transfer belt to cartoner • Electronic cam control Digitronic CamCon • MC control system • Drive 220/38V/50Hz • Without format tools