淬火炉 规格: - 标称温度/连续温度高达1150° - 温度可无级调节 - 温度显示 - 驱动 400 V / 8 kW - 内部尺寸约 宽 260 x 高 160 x 深 500 mm - 可用空间 0.02 m³ - 大约需要空间 宽 700 x 高 1400 x 深 900 mm - 重量约 140 千克
Description: Serial number: 6800605 Operating voltage: 220 V Frequency: 50 Hz Rated current: 14 A Temperature: up to 1140°C Internal dimensions: 300 x 170 x 100 mm Approx. Onsite Dimension. (l x w x h): 650 x 550 x 700 mm, weight approx.: 150 kg
最大温度:750度 开口尺寸:600x600 mm 腔室深度:1800 mm 总功率要求:kW 机器重量约:t 空间要求约:m 技术数据是制造商或操作员的规格,因此对我们 不具有约束力。我们保留进行事先销售的权利,我们 业务 和销售条款和条件仅适用 。 关于我们 超过400台自有机器在仓库 超过8500平方米的存储区域,起重机容量70吨 以上超过1000件配件为您的车间 如果您想出售机器生产线或您的公司, 请与我们联系。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。
等级: 250 c 宽度: . mm 高度: mm 深度: . mm 总功率要求: kW 机器重量 约: t 空间要求 约: m No.:8505548 技术数据是制造商或操作员信息,因此对我们 无约束力。我们保留进行事先销售的权利,我们的业 和销售条款和条件仅适用 。 关于我们 超过400台自有机器在仓库 超过8500平方米的存储区域,起重机容量70吨 以上超过1000件配件为您的车间 如果您想出售机器生产线或您的公司, 请与我们联系。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。
max. temperature: 1350 Grad size of opening: 300 mm depth of chamber: 600 mm total power requirement: 25 kW weight of the machine ca.: 1,5 t : : : : : Hardening Furnace Temp. 1350 °C H E R E A U S Electrically heated Hardening Furnace with Double Chambers for preheating and hardening. Model DKM 5 Year 1965 ______________________________________________________________ Temperature range max. chamber 1 1.000 °Celsius Temperature range max. chamber 2 1.350 °Celsius Door opening 300 x 200 mm Chamber size width x height x depth 300 x 200 x 500 mm For chamber 2 300 x 200 x 600 mm Working height above floor 1.050 bzw. 1.625 mm Heating up time 20°-1.350° = hardening chamber 2,75 h Heating up time 20°-1.000° = preheating chamber 2,00 h Exter ...
max. temperature: 1250 Grad size of opening: 250 x 160 mm depth of chamber: 500 mm total power requirement: 8 kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
degree: 650 working heigth: 250 mm length: 250 mm width: 250 mm depth: 450 mm total power requirement: 8 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
最高温度:1150度 开口尺寸:260 x 160 mm 腔室深度:450 mm 总功率要求:8 kW 机器重量约:t 硬化炉,电气 数据fü,此广告是使用ModulMWS创建的 - LogoTech oHG的机器管理。
最大温度:1000 开口的等级 尺寸:170 x 90 mm 腔室深度:280 mm 总功率要求:3 kW 机器重量约:80 kg 尺寸:0,7 x 0,55 x 0,72 m
• 公称温度 300 C • 内部容积 52 升 • 内部尺寸(宽 x 深 x 高)403 x 339 x 380 mm • 2 个镀铬滑入式格栅 • 数字温度控制 • 温度选择限制器 • 调速循环风机 • 新风过滤器,体积流量 10 m3/h • 无气翼调节 • 温度保护等级 2 • 上次检查 11/2021 • 驱动 220V/50Hz/1.5kW • 不带桌
• 公称温度 300 C • 内部容积 751 升 • 内部尺寸(宽 x 深 x 高) 1,000 x 550 x 1,366 mm • 2 个镀铬滑入式格栅 • 数字温度控制 • 温度选择限制器 • 气门调节送风/循环空气 • 温度保护等级 2 • 防护等级 IP 20 • 驱动 400V/50Hz/6.1kW • 轮子上的移动
Two identical drying ovens are available, max. temperature: 300°C, external dimensions: 827x895x816mm, internal dimensions: 503x554x644mm, weight: 100kg, on-site inspection is possible.
We sell 3 stackable incubators with wheels Heracell 150 Heracell 150 liter Co2 incubator. 3 interior shelves. Ambient range +3 ºC to 55ºC. Inside dimensions 46x41x61 cm. Stainless steel. Relative humidity up to 95% CO2 concentration range From 0 to 20% Moisture supply Integral system without tray Disinfection time 90°C about 9 hours External dimensions per incubator 63.5x68.5x86 cm Power 230V 50/60Hz, 5.2A, 0.62kW Weight per incubator 70 kg Good working order. Please also check our other listings.