| 描述: |
Blister machine Uhlmann B 1240 reloaded
二手机
Features:
Format range 100 x 153 mm
Output max 240 Blister/min (depending on product and format)
Drawing depth max. 12 mm (max. 24 mm after conversion)
Punching station output max. 60 cycles/min.
Pre-draw max. 125 mm
Plate sealing
Forming film rigid PVC, PVC/PVDC (Alu forming optional)
Film width max. 170 mm
Film thickness 0.1-0.35 mm
Sealing film aluminum
Perforating station
Batch embossing
Forming with air pressure
Blister transfer with bad ejection
Without format parts
Connection 380V/50Hz
This blister machine has been mechanically overhauled in our
specialist workshop. The entire electrical/pneumatic system has been
renewed. The machine control system was equipped with the latest
control technology.
The following parts were replaced:
PLC B+R X20 with Automation Panel 12.1 WXGA TFT, system unit
PPC3100
Servo drives, manufacturer B+R
1 x film advance after forming and sealing by means of linear
B661182 servo
Electrical installation, wiring
Pneumatics
Machine guarding
Various mechanical parts
Optionally available at extra cost:
Optical blister inspection
Brush feeder
Deticated feeder e.g. Uhlmann SimTab / HMH Systems Sypro
Aluminum forming station
Further film transport after forming
Printmark control via film stretching station
Change Parts
seller offer No. resale 03-0123
|