子类目
(三级类目)
生产厂家:
(品类: 301)
Ejection stroke: 35mm, weight: 700kg. ... 更多信息
INJECTION MOULDING MACHINE DEMAG DC320 with the following characteristics: Press: 350 ton Platens : 700x700mm Capacity: 2.5kg/shot The machine is in top excellent condition with only a few months of operation time. - Condition: top excellent - Can be shown under power - Reason for sale: commercial Screw diameter: 45mm Tie bar spacing (H) & (V): 720 x 650 mm Shot volume in cm3: 360 cc Pressure on material: 2400 bar
Description: Umbaumöglichkeit horizontal/vertikal für Spritzeinheit Spannkraft 350 kNApprox. Onsite Dimension. (l x w x h): 2,700 x 1,500 x 2,500 mm, weight approx.: 1,800 kg ... 更多信息
BATTENFELD 400/150 S-KS /⦠/ 12/80 injection molding machine Year of prod. 1981 The machine is fully operational, not used for 5 years, ready for transport ... 更多信息
Manufacturing number: 74448 Production Year: 1983 Closing force: 4,400 kN Maximum opening stroke: 720 mm Mold height min / max: 200/720 mm Screw diameter: 84 mm Technical condition: good The machine is connected to electricity (you can see how it works) ... 更多信息
Max. clamping force: 350kN, screw diameter: 30mm, max. dosing volume: 70cm³, with documentation. ... 更多信息
clamping force: 700 kNinjection volume: 103 cm³screw diameter: 30 mmplaten size: 432 x 310 mmclosing stroke: 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... 更多信息
二手注塑机 Arburg(阿博格)制造,型号为 Allrounder 221-75-350,1984 年新款。 闭合力:350 kN/吨。 喷射力:77 kN/吨。 工作电压:380V,50Hz。 加热: 3.4 kW. 泵电机:7.5 kW。 总负载:10.9 kW ... 更多信息
Injection molding machine BM-BIRAGHI model HORIZON 4370/650, Italy, 1985 Clamping force - 650 tons. Injection volume - 2000 cm3. The maximum injection pressure is 150 bar. Distance between columns 800x800mm. New screw pair f.90 mm. ... 更多信息
Clamping force: 1750kN, clamping plate dimensions: 700x804mm, opening stroke: 450mm, screw diameter: 57mm, length: 5959mm, width: 1360mm, height: 1960mm, weight: 4.5t, operational hours counter: 50,409h. ... 更多信息
Clamping force: 1750kN, clamping plate dimensions: 700x804mm, opening stroke: 450mm, screw diameter: 57mm, length: 5959mm, width: 1360mm, height: 1960mm, weight: 4.5t, operational hours counter: 56,736h. ... 更多信息
Manufacturing Number: 41757 Production Year: 1985 Closing force: 1750 kN Maximum opening stroke: 450 mm Mold height min / max: 200/500 mm Screw diameter: 52 mm Technical condition: good The machine is connected to electricity (you can see how it works) ... 更多信息
文章编号: 27-06-304 制造商: Arburg(阿博格) 总体状况非常好 经过机械车间测试 出货时间:保留所有权利。 建造年份:约1985年 长x宽x高:约2700x1200x1800mm 重量:约930kg 闭合侧: 锁模力:约250kN 霍尔姆尺寸 hxv: ca.221x0mm 板尺寸hxv:约342x250mm 最小安装高度:约150mm 最大安装高度:约300mm 最大板间距:约500mm 光圈行程:约200mm 喷涂侧: 螺杆直径:约22mm 排量:约38cc 注射压力:约1500bar 可根据要求提供其他配件 价格和其他技术数据可根据要求提
Clamping force kN 600 Mould thickness mm 200-400 Minimum mould diameter mm 160 Opening stroke mm 100-250 Distance between tie-bars V/H mm/mm 280/305 Stroke, injection unit mm 300 Nozzle contact force KN 41.2 Screw diameter mm 32 Injection pressure bar 1569 Max. injection volume cm3 73.9 ø centring ring mm 120 ø mould release bar (=standard) mm M12-M16 Max. cylinder temperature °C 400 SW release bar mm 32 - 36 - 41 ø clamping screw M12 Robot Yes
Clamping force: 2700kN, stroke volume: 20,300cm³, injection pressure: 1360bar, total power: 418kW, the machine was completely overhauled in 2008, it got new pumps and all bushings and guides were renewed, in 2016 the machine got a new Siemens control, in 2021 all pumps and valves were recalibrated and in 2021 all slide rails were renewed.
The press is currently decommissioned, and is equipped with an inverter for which it has energy consumption reduced to 50% It is equipped with a pneumatic solenoid valve. The cylinder is Bimetal replaced new for 3 years (polystyrene has always worked) ... 更多信息
恩格尔注塑机 型号: ES 2000-350 控制: CC 90 建造年份: 1987 锁模单元 锁模力 t: 350 开度距离 mm: 700 拉杆尺寸毫米: 735x735 最小/最大 mm 安装高度: 250/660 板尺寸: 约1080 x 1080 含泡沫塑料支架 注射单元 螺杆直径毫米: 70 喷雾重量 gr: 1009 喷雾量 cm³: 1154 喷雾压力棒: 1400 尺寸和重量 尺寸 长x宽 x 高: 9,00 x 2,10 x 2,40 机器重量 Kg: 20500 其他 欧洲地图 12 恩格尔机器