我们是一家从事二手注塑机和外围设备的国际贸易的 司。我们专注于锁模力高达4500吨的机器运输以及整 欧洲的工业厂房搬迁。 锁模力: 30 t 建造年份:2003年 螺杆直径: 18 mm 规范。喷雾压力: 2500 bar 锁模单元: 300/... 锁模力: 30 t 灯梁间距:300 x 300 mm 孔径行程: 250 mm 最大板间距: 330 mm 顶出行程: 140 mm www.europnet.eu
我们是一家从事二手注塑机和外围设备的国际贸易的 司。我们专注于锁模力高达4500吨的机器运输以及整 欧洲的工业厂房搬迁。 锁模力: 60 t 建造年份:2000年 注射单元: .../111 螺杆直径: 25 mm 规范。喷雾压力: 2253 巴 锁模单元: 600/... 锁模力:: 60 t 灯梁间距:355 x 355 mm 顶出力: 34 kN 孔径行程: 420 mm 最大板间距: 620 mm 顶出行程: 165 mm 油箱容量 油: 190 l www.europnet.eu
我们是一家从事二手注塑机和外围设备的国际贸易的 司。我们专注于锁模力高达4500吨的机器运输以及整 欧洲的工业厂房搬迁。 锁模力: 75 t 建造年份:2003年 螺杆直径: 30 mm 规范。喷雾压力: 2500 bar 锁模单元: 750/... 锁模力: 75 t 灯梁间距:405 x 380 mm 孔径行程: 320 mm 最大板间距: 480 mm 顶出行程: 250 mm www.europnet.eu
我们是一家从事二手注塑机和外围设备的国际贸易的 司。我们专注于锁模力高达4500吨的机器运输以及整 欧洲的工业厂房搬迁。 锁模力: 200 t 建造年份:2007年 螺杆直径: 40 mm 规范。注射压力: 2329 bar 锁模单元: 2000/... 锁模力:: 200 t 灯梁间距: 750 x 750 mm 孔径行程: 700 mm 最大板间距: 1000 mm 顶出行程: 260 mm www.europnet.eu
我们是一家从事二手注塑机和外围设备的国际贸易的 司。我们专注于锁模力高达4500吨的机器运输以及整 欧洲的工业厂房搬迁。 锁模力: 85 t 建造年份:2006年 螺杆直径: 25/30 mm 规范。喷雾压力: 2253/2289 bar 锁模单元: 850/... 锁模力:: 85 t 灯翼梁间距:420 x 420 mm 孔径行程: 550 mm 最大板间距: 750 mm 顶出行程: 300 mm www.europnet.eu
我们是一家从事二手注塑机和外围设备的国际贸易的 司。我们专注于锁模力高达4500吨的机器运输以及整 欧洲的工业厂房搬迁。 锁模力: 60 t 建造年份:2006年 注射单元: .../111 螺杆直径: 18/25 mm 规范。喷雾压力: 2236/2253 bar 锁模单元: 600/... 锁模力:: 60 t 灯梁间距:355 x 355 mm 顶出力: 32 kN 孔径行程: 420 mm 最大板间距: 620 mm 顶出行程: 120 mm 油箱容量 油: 190 l www.europnet.eu
我们是一家从事二手注塑机和外围设备的国际贸易的 司。我们专注于锁模力高达4500吨的机器运输以及整 欧洲的工业厂房搬迁。 锁模力: 60 t 建造年份:2003年 注射单元: .../111 螺杆直径: 18/25 mm 规范。喷雾压力: 2230/2253 bar 锁模单元: 600/... 锁模力:: 60 t 灯梁间距:355 x 355 mm 顶出力: 34 kN 孔径行程: 420 mm 最大板间距: 620 mm 顶出行程: 110 mm 油箱容量 油: 190 l www.europnet.eu
类型注塑机 类别: 塑料加工 品牌:Ferromatik 年份 1999 使用的条件 位置: 瑞士 机器规格 控制器 NA 锁模力 110 吨 螺杆直径 40 mm 机器描述 这款 Ferromatik 米拉克龙 K110 S D0gzkm(d0gz公里) 注射压力 2240 bar 拉杆之间的距离 470 x 470 mm 闭合力 1100 kN 注塑机于1999年制造。 生产时间24'456。 开模行程 550 mm 螺杆直径 40 毫米。 机器重量 5'500 kg
品牌:菲罗玛蒂克 年份: 2000 型号: K-TEC400S 应用类型:注塑成型 位置: 西班牙 机器类型:注塑机 可用性:立即 控制单元品牌:IQT 33 技术信息 控制单元 品牌:IQT 33 注射单元 螺杆直径: 60 MM 注射压力: 175 丹/厘米2 巴 夹紧单元 锁模力: 4000 KN
This Ferromatik K-TEC 60 S Injection moulding machine was made in 2006 in Germany. It has a clamping force of 600 kN and screw diameters of 18mm (vertical) / 25mm (horizontal). Operation hours are at 75874h.
This Ferromatik Milacron K-TEC 60 S Injection moulding machine was made in 2000 in Germany. It has a clamping force of 600 kN and a screw diamter of 25 mm. The operating hours are at 12968h.
This FERROMATIK Europe Elektra 300 Injection moulding machine was made in the year 2009 in Germany and has 58222 production hours. It is equipped with a Ferromatik-Multi-Mikroprozessor control unit. The machine has a clamping force of 3000 kN.
This FERROMATIK MILACRON k-tec 40 S Injection moulding machine was manufactured in the year 2004 in Germany. The machine has a clamping force of 400 kN.
This Ferromatik Milacron ELEKTRA evolution / EE 30 Injection moulding machine was made in 2003 in Germany. It has a clamping force of 300 kN and a screw diameter of 18 mm. Operation hours are at 88999h.
This FERROMATIK Milacron K-Tec 85 Injection moulding machine was manufactured in the year 2006. The machine has a clamping force of 850 kN and a screw diameter of 25 mm.
This Ferromatik Milacron K-TEC 200 S Injection moulding machine was made in 2007 in Germany. It has a clamping force of 2000 kN and a screw diameter of 40 mm. The operating hours are at 65545h.
This Ferromatik Milacron K-TEC 60 S Injection moulding machine was made in 2003 in Germany. It has a clamping force of 600 kN and screw diameters of 18 mm (vertical) and 25mm (horizontal). Operation hours are at 96555h.
This Ferromatik Milacron EE 75 Injection moulding machine was made in 2003 in Germany. It has a clamping force of 750 kN and a screw diameter of 30 mm. The operating hours are at 96694h.
This FERROMATIK Magna T (MTs) - 275 Injection Moulding Machine was made in the year 2018. It has a clamping force of 2750 kN and a column spacing of 660 x 660 mm. Max. plate distance is 1560 mm and mould installation height 400 - 950 mm. The opening stroke is at 610 mm. This injection moulding machine is equipped with a ENDURA touch control and a 1540 injection unit with 50mm screw diameter. It comes with 2x hydraulic core pullers (2-fold). See full original tech specs as PDF (DE) attached. Automation solution can be purchased additionally upon request.
Ferromatik K140-S Injection moulding machine Year : 1997 Weight : 9300 kg clamping force : 1400 kN voltage: 230 motor outputs power : 44,7 kW minimum moulding size in mm : 200 mm mould opening size : 750 mm (950 mm) tie bar distance : 500 x 500 mm maximum produce parts with a shot size 254 ccm / 216 gramm oil to fill in : 400 l hours of Production : 137,000 working Condition : good special features : 2 pcs. hydraulic core pull 4 pcs. air valves hot runner 16 zones color feeder connectivity option
Manufacturer Ferromatik Model K275-s Year 1998 Clamping Force 2750 kN International dimensions 2750 H-1636 Injection pressure 1575 bar screw diameter mm 80 injection volume cm³ shot capacity gr 1450 injection pressure bar 1575 Stroke volume 1040 cm3 Motor 55 kw Heating 22.7kw Weight 13.6 T
Closing unit Clamping force [kN] 10000 Dimensions of mounting plates (hxv) [mm] 2000 x 1605 Clearance between columns (hxv) [mm] 1550 x 1200 Min./max. mold height [mm] 500 / 1300 Maximum opening width [mm] 2400 Injection unit Screw diameter [mm] 90 Injection volume [cm3] 2799 Injection weight [g] 2407 Injection pressure [bar] 2300 Electrical and hydraulic equipment Rated power of the pump motor [kW] 150 Heater power [kW] 44.1 Dimensions and weight Net weight with control cabinet [t] 52000 Dimensions (length x width x height) [m] 10.45 x 3.18 x 2.82 Injection molding machine included with the Apex robot
Ferromatik All-Electric Elektra series machine Control panel : IQT Injection Shot Weight (mm) : 120 Robot Interface : Euro Robot Interface: Yes Ejector Back Verification: Yes Interface For Colour Feeder: Yes Intergrated Hot Runner System: No Solonoid Operating Pneumatic: Yes Pneumatic Delivery Chute: No Shut-Off Nozzle: No Core Pulls: No
FERROMATIK KTEC 110S Year of manufacture: 2003 Injection unit: 493 Screw diameter: 40 mm Screw length L / D: 20 Theoretical injection volume: 201 cm³. Maximum injection pressure: 2240 bar Max. injection rate: 570 cm³ / s Max. screw rotation speed: 260 min-1 Closing unit Clamping force : 1110 kN Min. mould thickness: 250 mm Max. opening stroke: 550 mm Max distance between platens: 800 mm Distance between tie bars: 470 x 470 mm Platen size: 690 x 690 mm General Pump motor power: 22 kW Heating power: 12.7 kW Total installed power: 31 kW Oil quantity: 290 l. Dimensions (length x width x height) : 5 x 1.6 x 2 m. Weight : 5500 Kg Visible without power Press failure, CPU problem. Option : Pressure accumulator 2 hydraulic cores 2 pneumatic valves Euromap 12
Used machine in good condition. Available for immediate delivery. - Screw diameter: 80 mm - Clamping force: 2.500 kN - Shot weight max: 1.441 g - Injection rate: 2.000 cm?/s - Injection pressure: 1.665 bar - Injection volume: 1.583 cm? - Screw speed: 240 rpm - Screw L/D ratio: 19,3 - Nozzle stroke / force max.: - / 115 mm / kN - Ejector stroke / force max.: 200 / 85 mm / kN - Mould opening stroke max: 850 mm - Mould height min: 345 mm - Daylight between platens max: 1.195 mm - Platen size (h x v): 970 x 1.035 mm - Heating zones: 4 + 1 - Distance between tie-bars (h x v): 630 x 630 mm - Ejector force: 85 kN - Mold opening force: 144 kN - Oil tank capacity: 680 l - Power: installed max: 77 kW - Weight: 18.500 kg - Dimensions (long x wide x high): 8.220 x 2.160 x 2.660 mm
二手机器状况良好。可立即交付。 - 注射压力:1.817巴 - 注射体积:2.290厘米? - 锁模力:4.500 kN - 功率:安装最大:90 + 50,6千瓦 - 重量:28.000公
with Sepro robot - Distance between tie-bars (h x v): 640 x 625 mm - Screw diameter: 55 mm - Shot weight max: 595 g - Injection rate: 310 cm?/s - Injection pressure: 1.906 bar - Injection volume: 614 cm? - Screw speed: 318 rpm - Screw L/D ratio: 23,5 - Clamping force: 2.750 kN - Mould opening stroke max: 580 mm - Mould height max: 640 mm - Mould height min: 200 mm - Daylight between platens max: 1.220 mm - Platen size (h x v): 935 x 920 mm - Control: CINCINNATI MILACRON CAMAC 486 - Power: installed max: 32 kW - Dimensions (long x wide x high): 7.500 x 1.510 x 2.377 mm - Weight: 11.698 kg
二手机器状况良好。可立即交付。 - 螺杆直径:35毫米 - 最大注射重量:123克 - 注射压力:1.964巴 - 注射体积:0厘米? - 螺杆转速:400转/分 - 螺杆长径比:20 - 喷嘴行程最大:240 mm - 锁模力:850 kN - 模具高度最大:450 mm - 模具高度最小: 250 mm - 压板间距最大: 800 mm - 压板尺寸 h: 690 毫米 - 压板尺寸v:690毫米 - 喷射力:50 kN - 核心拉拔器: 1 x KDE-6-S-B - 油箱容量:290升 - 功率:安装最大:29千
包括塞普罗,带蓄能器 - 拉杆间距 (高 x v): 630 x 630 mm - 空气阀: 1 - 螺杆直径:60毫米 - 最大注射重量:694克 - 注射压力:2.144巴 - 注射体积:763厘米? - 锁模力: 1.750 kN - 模具高度最小: 295 mm - 压板间距最大: 750 mm - 加热区:4 - 压板尺寸 (高 x v): 1.035 x 970 毫米 - 喷射力:0千牛 - 控制:IQT6 - 核心拉力:1 - 营业时间:82.000 - 功率:安装最大:55 + 29,3千瓦 - 重量:11.200公斤 - 尺寸(长 x 宽 x 高):6.900 x 2.000 x 2.600 mm