二手 SANDRETTO 出售

桑德雷托 MEGA T 4435/610 注塑机 （1998） 610吨热塑性塑料注塑机 在工作状态下。 欧洲地图 4435/610 螺杆直径： 21 计算注射量：2831cm3 螺杆长度： 21 最大注射能力：746 cm3/1” 层压能力： 86 克/1” 材料压力： 1548 bar 闭合力：610吨。 可变排量发动机扭矩：5570 Nm。 螺杆转速： 153 RPM 螺杆液压马达功率：120 HP 注射组行程：725毫米。 加热区：4+喷嘴。 总加热功率：38千瓦。 锁模力： 5985 kN 模具厚度最小/最大：300/1000 mm。 移动平面行程：930毫米。 板材尺寸：1270 x 1270 mm。 色谱柱通道：850 x 850 mm。 色谱柱直径：160毫米。 提取力： 103 kN 拉拔器行程：350 真空循环：10-11 n/1” 液压回路压力：160巴 油箱容量：850升。 电动机功率： 93 kW 总装机功率： 130 kW 尺寸：11� ...

喷油器品牌：桑德雷托，型号：1300/230。230吨。年份� � 2002

B&A 编号： 9009 吨： 220 注射重量：575克 螺杆直径：55MM 行程量：529CM3 注射压力：1550BAR 压板尺寸：860 X 860MM 分径：585 x 585MM 最小模具高度：210MM 最大模具高度：630MM 开模行程：580MM 最大日光：1210MM 顶出行程：230MM 控制装置：SEF 2000 空气阀： 1 拉芯：1 丝杠驱动：液�

编号： 8692

编号： 8838

B&A 编号： 8986 吨： 700 注射重量：5618G 螺杆直径：120MM 行程量：6107CM3 注射压力：1500AR 压板尺寸：1560 X 1560MM DBTB：1060 x 1060毫米 最小模具高度：350MM 最大模具高度：1100MM 开模行程：1150MM 最大日光：2250MM 顶出行程：350MM 控制装置：SEF 2000 空气阀： 4 拉芯：2 丝杠驱动：液�

B&A 编号： 8983 吨： 380 注射重量：1310G 螺杆直径：75MM 行程量：1370CM3 注射压力：1550AR 压板尺寸：980 X 980MM 分径：650 x 650MM 最小模具高度：200MM 最大模具高度：730MM 开模行程：710MM 最大日光：1140MM 顶出行程：240MM 控制装置：SEF 100 空气阀： 1 拉芯：2 丝杠驱动：液�

B&A 编号： 8984 吨：360 注射重量：1301G 螺杆直径：75MM 行程量：1370CM3 注射压力：1500AR 压板尺寸：980 X 980MM 分径：650 x 650MM 最小模具高度：200MM 最大模具高度：730MM 开模行程：710MM 最大日光：1440MM 顶出行程：240MM 控制装置：SEF 90 空气阀： 1 拉芯：2 丝杠驱动：液�

B&A 编号： 8985 吨： 150 注射重量：370 螺杆直径：50MM 行程量：392CM3 注射压力：1560AR 压板尺寸：690 X 690MM DBTB：460 x 460毫米 最小模具高度：155MM 最大模具高度：560MM 开模行程：500MM 最大日光：1060MM 顶出行程：160MM 控制装置：SEF 90 机器人接口：EUROMAP 12

民宿编号： 8982 吨： 270 注射重量：840G 螺丝直径：65MM 每搏输出量：863CM3 注射压力：1550BAR 压板尺寸：860 X 860MM DBTB：570 X 570毫米 最小模具高度：210MM 最大模具高度：730MM 开模行程：630MM 最大日光：1360MM 顶出行程：220MM 控制：SEF 100 抽芯：2 空气阀：1 电机：37KW 制热量：20KW 机器人接口：EUROMAP 12 螺杆驱动：液�

B&A 编号： 8979 吨： 220 注射重量：523G 螺丝直径：55MM 每行程容积：575CM3 注射压力：1550AR 压板尺寸：770 X 770MM DBTB：510 X 510毫米 最小模具高度：210MM 最大模具高度：630MM 开模行程：550MM 最大日光：1180MM 顶出行程：190MM 控制：SEF 2000 抽芯：2 空气阀：1 机器人接口：EUROMAP 67 螺杆驱动：液�

B&A 编号： 8980 吨： 200 注射重量：502G 螺丝直径：55MM 每行程容积：546CM3 注射压力：1450AR 压板尺寸：770 X 770MM DBTB：510 X 510毫米 最小模具高度：210MM 最大模具高度：630MM 开模行程：550MM 最大日光：1180MM 顶出行程：190MM 控制：SEF 100 抽芯：2 空气阀：1 机器人接口：EUROMAP 12 螺杆驱动：液�

品牌：桑德雷托 年份： 2010 型号： HES 3500 应用类型：注塑成型 位置： 葡萄牙 机器类型：注塑机 可用性：立即 GINDUMAC ID： PT-INJ-SAN-2010-00001

Description: Serial number 93307538 Clamping force 350 Ton, 3500 kN , Distance between the tie bars (HxV) 530 x 530 mm , Mould size 200 x 650 mm Diameter 70 mm Shot volume, calculated injection 990 cm3 Material pressure 1.980 bar Opening stroke: 600 mm Volume injected: 1347 cm3 Material pressure: 1450 bars Screw diameter: 70 mm Heating power: 23 KW Min/max mold thickness: 200 - 650 mm Dimensions 8010 x 1400 x 2480 mm Weight 14500kg Approx. Onsite Dimension. (l x w x h): 8,010 x 1,400 x 2,480 mm, weight approx.: 14,500 kg

Description manual command keyboard Sandretto S9 from spare parts warehouse no disassembly

This SANDRETTO HES 3500 injection moulding machine was built in the year 2010.

Injection molding machine SANDRETTO Serie otto sef 100 60T E192 Series otto sef 100 60T E192 Screw D35 / 131 cm3 / 1450 bar Between columns: 325 x 325 Aperture: 350 Mold thickness: min 90 / max 410 Dim trays: 500 x 500 Installed power: 25.25 kW Dimensions: 5.17 x 1.98 x 1.17 Weight: 4100 kg Euromap 12 robot interface Auxiliary cores blowgun Top dosage carpet control Socket table

Sandretto injection press series 7 135 tons sandretto series 7 135 ton Injection molding machine

Screw diameter: 50 mm Calculated injection volume: 475 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: 193.2 cm³/s Pressure on the material: 1815 bars Plasticising capacity PS: 32.7 Kg/h Screw speed: 295 RPM Hydraulic motor torque: 1128 Nm Hydraulic motor power: HP Nb Temperature zones: 3 + 1 N CLOSING UNIT Closing force: 3000 kN Opening stroke: 630 mm Mini /Max Mold Thickness: 210-730 mm Max distance between tray: 30 mm Passage between columns: 570 x 570 mm Dimensions of the trays: 860 x 860 mm GENERAL Heating power: 30 kW Total installed power: 44.20 kW Oil quantity: 350 l.

Sandretto Series 350 Injection molding machine Ask for technical details.

This machine complies with CE standards but is not in working order (hydraulic problem / pump or angular translator / other). Sale in condition The offer includes dismantling, preparation for shipment and loading on truck on 26/09/2022. The machine is equipped with an injection unit, hydraulic core (without robot / manipulator). Type of material used: ABS/PC Closing force: 165 T Opening stroke: 525 mm Distance between columns: 525 x 525 mm Platen size: 760 x 760 mm Min/max mould height: 180/560 mm Injection moulding: Screw diameter: 43 mm Screw length: 20 D Injection volume: 319 cm3 Pressure: 2028 bar General: Motor power: 22 kW Total installed power: 31.9 kW Weight: 7.8 tonnes

SANDRETTO Micro 40T E injection molding machine SANDRETTO micro 40T E247 Version 2 GEFRAN Euromap 12 robot interface 4-way water box Socket table

Screw diameter: 70 mm Calculated injection volume: 1355 cm³ Length/diameter ratio: 20 L/D Pressure on the material: 1959 bars Plasticizing capacity PS: 57 Kg/h Screw Speed: 177 RPM Hydraulic motor torque: 3181 Nm Hydraulic motor power: HP Nb Temperature zones: 4 + 1 N CLOSING UNIT Closing force: 4850 kN Opening stroke: 830 mm Mini /Max Mold Thickness: 250-850 mm Max distance between tray: mm Passage between columns: 740 x 740 mm Dimensions of the trays: 1120 x 1120 mm GENERAL Heating power: 45 kW Total installed power: 68.2 kW

Closing force: 3000 kN Opening stroke: mm Mini /Max Mold Thickness: 230/730 mm Max distance between tray: mm Passage between columns: 665 x 665 mm Dimensions of the trays: 980 x 980 mm

SANDRETTO series 8 430/150 with SEF 100 Clamping force: 150 T Distance between columns: 460 x 460 mm Min / max mold thickness: 155 - 560 mm Opening stroke: 500 mm Tray dimensions: 690 x 690 mm Injectable volume: 286 cm3 Material pressure: 1500 bars Screw diameter: 45 mm total installed power 29 kW Weight: 7000 kg Dimensions: 6.36 x 2.08 x 1.50 m Euromap 12 robot interface core top dosage

SANDRETTO series 8 790-200 SEF100 Clamping force: 200 T Distance between columns: 510 x 510 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Tray dimensions 770 x 770 mm Injectable volume: 546 cm3 Material pressure: 1450 bars Screw diameter: 55 mm Weight: 9000 kg Dimensions: 7.26 x 2.30 x 1.58 m

SANDRETTO series 8 790-200 SEF 90 Clamping force: 200 T Distance between tie rods: 510 x 510 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Injectable volume: 546 cm3 Material pressure: 1450 bars Screw diameter: 55 mm Weight: 9000kg Dimensions: 7.26 x 2.30 x 1.58 m Euromap 12 robot interface (CHAVERIAT A.111.24.PM - CH 2002 from 07/1998 as an option possible)

SANDRETTO serie 8 612/150 with SEF 90 Clamping force : 150 T Distance between tie bar : 460 x 460 mm Mould thickness min / max : 155 - 560 mm Opening strocke : 500 mm Injectable volume : 392 cm3 Pressure on material : 1560 bars Screw diameter : 50 mm Weight : 7000 kg Dimensions : 6,36 x 2,08 x 1,50 m

SANDRETTO series 8 1334/330 Clamping force: 330 T - 3300 KN Distance between tie rods: 650 x 650 mm Tray dimension: 980 x 980 mm Min / max mold thickness: 200 - 730 mm Opening stroke: 550 mm Injectable volume: 863 cm3 Material pressure: 1550 bars Screw diameter: 65 mm Heating power: 37 KW Total machine power: 57 KW L/D ratio: 21 Weight: 15,700 kg Dimensions: 7.85 x 2.36 x 1.85 m Euromap 12 robot interface aus core top dosage

SANDRETTO series 7 1960/350 Clamping force: 350 T - 3500 KN Distance between columns: 600 x 600 mm Dimensions of the trays: 910 x 910 mm Minimum/maxi thickness of the mold: 200 - 650 mm Opening stroke: 600 mm Volume injected: 1347 cm3 Material pressure: 1450 bars Screw diameter: 70 mm Heating power: 23 KW Weight: 14,500 kg Mounted mixing screw + std screw + one-piece screw

SANDRETTO Serie 8 sef 100 injection molding machine otto 200T E612 Sef 100 series Screw D50 / 392 cm3 / 1560 bar Between columns: 510 x 510 Opening: 550 Mold thickness: min 210 / max 630 Dim trays: 770 x 770 Installed power: 34.8 kW Dimensions: 6.36 x 2.14 x 1.84 Weight: 8800 kg Euromap 12 robot interface Auxiliary cores Top dosage

The press is currently decommissioned, and is equipped with an inverter for which it has energy consumption reduced to 50% It is equipped with a pneumatic solenoid valve. The cylinder is Bimetal replaced new for 3 years (polystyrene has always worked)

SANDRETTO serie 9 1300/3200 Clamping force : 320 T - 3200 KN
 Distance between tie bar : 650 x 650 mm Platen dimension : 980 x 980 mm 
Mould thickness min / max : 200 - 730 mm
 Opening strocke : 710 mm 
Injectable volume : 658 cm3
 Pressure on material : 1985 bars
 Screw diameter : 55 mm Total power of the machine : 53,7 KW Rapport L/D : 20
 Weight : 14350 kg
 Dimensions : 7,54 x 2,31 x 1,91 m

SANDRETTO series 7 177/60 Clamping force: 60 T - 600 KN Distance between columns: 301 X 301 mm Tray dimensions: 455 X 455 mm Min/max mold thickness: 80-350 mm Volume injected: 125 cm3 Material pressure: 1408 bar Screw diameter: 40 mm Heating power: 6KW Weight: 2900 kg

SANDRETTO Serie NOVE 2200/860 from 2003 Injection unit: 860 Screw diameter: 50 mm Screw length L / D: 20 Theoretical injectable volume: 475 cm³ Maximum injection pressure: 1815 bars Maximum injection flow: 193.2 cm³ / s Maximum screw rotation speed: 295 min-1 Closure unit Closing force: 2200 kN Mini / Max mold thickness: 210 - 630 mm Opening stroke: 550 mm Passage between columns: 510 x 510 mm Platen size: 770 x 770 mm General Pump motor power: 30 kW Heat output: 14.2 kW Total installed power: 44.2 kW Quantity of oil: 350 l. Dimensions (Length x Width x Height): 6.135 x 1.65 x 2.08 m. Weight: 8100 Kg

SANDRETTO series 9 860/2200 Clamping force: 220 T - 2200 KN Distance between tie rods: 510 X 510 mm Tray dimension: 770 X 770 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Injectable volume: 475 cm3 Material pressure: 1815 bars Screw diameter: 50 mm New screw / sheath injection assembly Total machine power: 43.1 KW L/D ratio: 20 Euromap 12 robot interface (Dal maschio Ginko from 2004 possible option) 2 aux cores (PM and PF) Top dosage Weight: 8100 kg Dimensions: 6.13 x 2.08 x 1.59 m

SANDRETTO serie 9 1300/3000 Clamping force : 300 T - 3000 KN
 Distance between tie bar : 570 X 570 mm Platen dimension : 860 X 860 mm 
Mould thickness min / max : 210 - 730 mm
 Opening strocke : 630 mm 
Injectable volume : 658 cm3
 Pressure on material : 1985 bars
 Screw diameter : 55 mm Total power of the machine : 53,7 KW Rapport L/D : 20
 Weight : 11 000 kg
 Dimensions : 7,04 x 2,22 x 1,82 m

SANDRETTO serie 9 1780/3950 Clamping force : 395 T - 3950 KN
 Distance between tie bar : 650 x 650 mm Platen dimension : 980 x 980 mm 
Mould thickness min / max : 200 - 730 mm
 Opening strocke : 710 mm 
Injectable volume : 960 cm3
 Pressure on material : 1852 bars
 Screw diameter : 63 mm Total power of the machine : 66,8 KW Rapport L/D : 20
 Weight : 15 000 kg
 Dimensions : 7,80 x 2,31 x 1,93 m Additional option on this machine : Sequential injection

SANDRETTO 9 series 2650/4850 Clamping force: 485 T - 4850 KN Distance between columns: 740 x 740 mm Platform dimensions: 1120 x 1120 mm Min / max mold thickness: 250 - 850 mm Opening stroke: 830 mm Injection volume: 1768 cm3 Material pressure: 1500 bars Screw diameter: 80 mm - 4 hydraulic cores - 1 blow gun - 2 8-way water boxes - Socket panel (4 three-phase, 1 neutral, 1 earth at the rear + 1 three-phase, 1 neutral and 1 earth at the front) Total power of the machine: 85 KW L/D ratio: 20 Weight: 21,500 kg Dimensions: 8.71 x 2.65 x 2.14m

SANDRETTO Serie Nove S sef 2000 220T E860 injection molding machine Series new S sef 2000 220T E860 Screw D50 / 475 cm3 / 1815 bar Between columns: 510 x 510 Opening: 550 Mold thickness: min 210 / max 630 Dim trays: 770 x 770 Total installed power: 44.2 kW Dimensions: Weight: 8100 kg Euromap 12 robot interface Auxiliary cores Top dosage socket table 4-way water box

SANDRETTO series 8 612/95 Clamping force: 95 T Distance between tie rods: 370 x 370 mm Dim trays 560 x 560 Min / max mold thickness: 100 - 460 mm Opening stroke: 410 mm Injectable volume: 392 cm3 Material pressure: 1560 bars Screw diameter: 50 mm total installed power 34.8 kW Weight: 5700 kg Euromap 12 robot interface 2 aux cores (PF and PM) 3 socket table With magnetic plate (TECNOMAGNETE 2009) top dosage

Manufacturer : Sandretto Model: 300T 860 NOVE S Year of manufacture: 2004 Screw diameter: 50 mm Calculated injection volume: 475 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: 193.2 cm³/s Pressure on the material: 1815 bars Plasticising capacity PS: 32.7 Kg/h Screw Speed: 295 RPM Hydraulic motor torque: 1128 Nm Temperature zones: 3 + 1 N Closing force: 3000 kN Opening stroke: 630 mm Mini /Max Mold Thickness: 210-730 mm Max distance between tray: 30 mm Passage between columns: 570 x 570 mm Dimensions of the trays: 860 x 860 mm Heating power: 30 kW Total installed power: 44.20 kW Oil quantity: 350 l.

SANDRETTO Serie nove T injection molding machine 300T E1300 Screw D63 / 863 cm3 / 1523 bar Between columns: 665 x 665 Aperture: 660 Mold thickness: min 230 / max 730 Dim trays: 980 x 980 Installed power: 55.5 kW Dimensions: 7055 x 2547 x 2160 Weight: 12900 kg Euromap 12 robot interface Auxiliary cores (PF and PM) Top dosage 2 socket boards 10-way stainless steel water box APEX robot