二手 NETSTAL 出售

仓库编号：503010 制造商： 网士达 型号：新能源1500k-600 控制： 数字信号处理器 4 建设年份： 2007 营业时间： 47942 h 技术数据 关闭页面 锁模力： 1500 kN 霍尔马斯 v： 460 mm 霍尔马斯 h： 460 mm 钢板尺寸 h： 700 mm 钢板尺寸 v： 757 mm 最小安装高度： 250 mm 最大安装高度： 550 mm 最大钢板高度： 1000 mm 开启距离： 450 mm 顶出行程： 150 mm 喷射力： 50 kN 定心活动板 D： 125 mm 定心固定板 D： 125 mm 喷涂侧技术参数 螺杆直径： 55 mm 排量： 427 cc 喷雾压力： 1562 巴 螺杆长度： 23 升/天 螺杆行程： 180 mm 螺杆转速：860分钟 螺杆扭矩：550 N 塑化电流： 70 克/秒 PS 外部注射流量： 2376 g/s hp 尺寸和重量 机器尺寸长x宽x高：6.53米 x 1.84米x 1.97米 整机重量：10100KG 设备 � ...

仓库编号：503011 制造商： 网士达 型号：新能源1500k-600 控制： 数字信号处理器 4 建设年份： 2007 营业时间： 39299 h 技术数据 关闭页面 锁模力： 1500 kN 霍尔马斯 v： 460 mm 霍尔马斯 h： 460 mm 钢板尺寸 h： 700 mm 钢板尺寸 v： 757 mm 最小安装高度： 250 mm 最大安装高度： 550 mm 最大钢板高度： 1000 mm 开启距离： 450 mm 顶出行程： 150 mm 喷射力： 50 kN 定心活动板 D： 125 mm 定心固定板 D： 125 mm 喷涂侧技术参数 螺杆直径： 55 mm 排量： 427 cc 喷雾压力： 1562 巴 螺杆长度： 23 升/天 螺杆行程： 180 mm 螺杆转速：860分钟 螺杆扭矩：550 N 塑化电流： 70 克/秒 PS 外部注射流量： 2376 g/s hp 尺寸和重量 机器尺寸长x宽x高：6.53米 x 1.84米x 1.97米 整机重量：10100KG 设备 � ...

PET-LINE 60N/95 用于瓶坯 PCO 的完整系统，包括： 1. PET 注射系统 Netstal PET 2000-3700 R 2. 60腔注塑模具奥托霍夫斯泰特股份公司（27克） 3. 60腔注塑模具奥托霍夫斯泰特股份公司（30.5克） 4. 百旺烘干机 560 kg/h 5. 空气除湿机 RPA 1200， 1200 m3/h 6. 压缩机空气中心 SM 12， 60 m3 7. 冷水机组冷水机组 CA1921MT 8. 冷水机组冷水机组 CA0621MT 制造商： 奥托霍夫斯泰特股份公司 生产年份：2012 装机功率：462千瓦。 工作时间：7285小�

B&A 编号： 8945 吨： 450 注射重量：916 螺丝直径：70MM 每搏输出量：954CM3 注射压力：2144AR 压板尺寸：1150 X 1185MM DBTB：920 X 920毫米 最小模具高度：500MM 最大模具高度：950MM 开模行程：800MM 最大日照度：1750MM 顶出行程：250MM 控制：DPS 抽芯：2 空气阀： 3 电机：75 制热量：43KW 机器人接口：STAR USE 1000 螺杆驱动：电动

提供： 网达协同 3500/1700 机器人模内贴标SM700 / TM200高速 BJ./2009/10年度

Description Working hours: 26782 Machine set up for a third injection. Machine complete with thermoregulators and protections. n. 16 hot rooms n. 8 radial air

Description Working hours: 27139 Machine set up for a third injection. Machine complete with thermoregulators and protections. n. 16 hot rooms n. 8 radial air

Description Working hours: 36359 Machine complete with second and third injection, thermoregulators and protections. n. 16 hot rooms n. 8 radial air

Description Working hours: 32848 Machine set up for a third injection. Machine complete with thermoregulators and protections. n. 16 hot rooms n. 8 radial air

Screw diameter: 35mm, max. opening path: 350mm, length: 5017mm, width: 1565mm, height: 2156mm, weight: 6t, operational hours counter: 124,862h, with hydraulic core pull, 2x air valve DS, hydraulic valve gate and documentation.

Line pressure: 210bar, injection force: 1158kN, clamping force: 6000kN, opening stroke: 0-950mm, mould space: 500-1000mm, operational hours counter: 79,588h.

Injection force: 113kN, closing force: 500kN, opening path: 50mm, weight: 4.4t, with documentation and software.

Clamping force: 3500kN, injection unit: 1700, drive power: 75kW, control system: Graphtrack/DSP with trackball, plasticizing unit: HiMelt screw 70-220(1801bar,954cm³), mould height: 600mm-950mm. Operating hours: 83111 (as of: 14.04.2021). Buyer must provide oil filling after purchase. Material conveyor not included. Available from 30.07.2024. Documentation available. On-site inspection is possible.

This Netstal SynErgy 1500-460 Injection moulding machine was manufactured in the year 2003 in Switzerland. It is controlled by a Netstal control unit. The machine has a clamping force of 1500 kN.

This Netstal SynErgy 1750-460 Injection moulding machine was made in 2001 in Switzerland. It is equipped with a Netstal control unit. The machine has a clamping force of 1750 kN.

Clamping force [kN] 5500 Clearance between columns (hxv) [mm] 1020 x 920 Maximum opening width [mm] 2251 Injection unit Screw diameter [mm] 70 Injection volume [cm3] 1074 Shot weight [g] 1034 Injection pressure [bar] 2400 Dimensions and weight (approximately) Net weight with control cabinet [t] 39,5

Clamping force [kN] 3500 Clearance between columns (hxv) [mm] 730 x 730 Injection unit Screw diameter [mm] 62 Injection volume [cm3] 749 Shot weight [g] 718 Injection pressure [bar] 2400 Dimensions and weight (approximately) Net weight with control cabinet [t] 23,5

Brand NETSTAL Type Synergy 1000-230 Year of manufacture 2005 Clamping unit Clamping force 100 ton Opening stroke 400 mm Beam dimension (h x v) 460 x 460 mm Installation height min. 250 mm Installation height max. 550 mm Injection unit Screw diameter 35 mm Injection volume 123 cm³ Injection weight PS 118 gr Injection pressure 1890 bar Dimensions and weights Dimensions LxWxH 5,4 x 1,85 x 2,0 m Machine weight 7600 kg Additional information & extras Valve gate 3 pcs.

Closing unit Clamping force [kN] 4200 Dimensions of mounting plates (hxv) [mm] 1127x1060 Clearance between columns (hxv) [mm] 713 x 713 Min./max. mold height [mm] 400-750 Maximum opening width [mm] 1450 Injection unit Screw diameter [mm] 62 Injection volume [cm3] 749 Injection weight [g] 719 Injection pressure [bar] 2296 Dimensions and weight Net weight with control cabinet [t] 27 Dimensions (L x W x H) [m] 7.825 x 2.15 x 2.599

Closing unit Clamping force [kN] 3500 Dimensions of mounting plates (hxv) [mm] 1127x1060 Clearance between columns (hxv) [mm] 720x721 Min./max. mold height [mm] 600-950 Maximum opening width [mm] 1650 Injection unit Screw diameter [mm] 70 Injection volume [cm3] 954 Injection weight [g] 916 Injection pressure [bar] 2267 Dimensions and weight Net weight with control cabinet [t] 24.3 Dimensions (L x W x H) [m] 8.57 x 2.15 x 2.6

The documentation is available CE certificate is available Documentation is available 4 units available Price is for 1 unit > screw diameter 32 mm > injection volume ~ 190 cm3 (for PS) > injection pressure 1482 bar > clamping force form 50 Ton > minimum mold size 195 mm > max opening 500 mm > 330 x 540 mm plate > column spacing 375 x 200 mm

INJECTION UNIT Screw diameter: 80 mm Calculated injection volume: 1608 cm³ Pressure on the material: 2304 bars CLOSURE UNIT Closing force: 5000 kN Opening travel: 0-860 mm Mini/Max Mold Thickness: 750-1250 mm Passage between columns: 920 x 920 mm

Closing unit Clamping force [kN] 2400 Dimensions of mounting plates (hxv) [mm] 907 x 910 Clearance between columns (hxv) [mm] 630 x 630 Min./max. mold height [mm] 460-800 Maximum opening width [mm] 1310 Injection unit Screw diameter [mm] 55 Injection volume [cm3] 475 Injection weight [g] 456 Injection pressure [bar] 1890 Dimensions and weight Net weight with control cabinet [t] 15.8 Dimensions (L x W x H) [m] 6.95 x 2.075 x 2.48

Injection unit Screw diameter: 80 mm Calculated injection volume: 1608 cm3 Length/diameter ratio: 27 L/D Pressure on the material: 2400 bars Closing unit Closing force: 5000 kN Opening stroke: 901 mm Minimum mold thickness: 600 mm Passage between columns: 1020 x 920 mm General Heating power: 132 kW Other Equipment : Commissioned: 2010 Number of hours: 7000 h Tonnage: 500

Netstal SynErgy 1500-600 injection molding machine year of production 2003 – 45kW engine – maximum clamping force 1500kN – injection unit 600 – screw diameter 50mm – injection volume 353 cc – injection weight 339 g – injection pressure 1890 bar – hydraulic ejector on the movable plate – hydraulic core on the movable plate – hydraulic core on a fixed plate – two air valves – mold height 250-550mm – mold opening stroke 0-450mm – spacing between columns 460 X 460 mm – weight of the machine 11,200 kg

Clamping force [kN] 3000 Clearance between columns (hxv) [mm] 720 x 720 min./ max. mold height [mm] 400-1100 Maximum opening width [mm] 700 injection unit Screw diameter [mm] 62 Injection volume [cm3] 749 Injection weight [g] 680.9 Injection pressure [bar] 2100 Centering ring diameter 120 / 160 mm Core movable plate - 2 pcs Air valve - 8 pieces Euromap 12 Oil tank 445 ltr

Netstal S 600-230 injection molding machine year 2007 Clamping force [kN] 600 Dimensions of mounting plates (hxv) [mm] 617 x 600 Clearance between columns (hxv) [mm] 410 x 410 min./ max. mold height [mm] 200 - 500 Maximum opening width [mm] 540 injection unit Screw diameter [mm] 32 Injection volume [cm3] 123 Injection weight [g] 118 Injection pressure [bar] 1890

Netstal brand Clamping force [kN] 1000 - 2990 Year of production 2004 Injection weight [g] 200 - 499

Clamping force kN 600 Mould thickness mm 200-400 Minimum mould diameter mm 160 Opening stroke mm 100-250 Distance between tie-bars V/H mm/mm 280/305 Stroke, injection unit mm 300 Nozzle contact force KN 41.2 Screw diameter mm 32 Injection pressure bar 1569 Max. injection volume cm3 73.9 ø centring ring mm 120 ø mould release bar (=standard) mm M12-M16 Max. cylinder temperature °C 400 SW release bar mm 32 - 36 - 41 ø clamping screw M12 Robot Yes

Machine: NETSTAL 550 T 5500-4200 EVOS Year: 2010 Number of hours: 7000H Closing Closing force: 550 T Opening stroke: 900 mm Between columns: 1020 x 920 mm Mini / maxi mold: 600-1050 mm Max distance between plates: 1950 mm Injection: Screw diameter: 80 mm Screw length: 27 D cm3: 1608 Bars: 2400 General: Engine power: 132 KW Heating power: 94 KW Closing weight: 32 tonnes Injection weight: 8 tonnes Dimensions length: 9.83 m Dimensions width: 2.54 m Dimensions height: 2.35 m Options: Cores: 2 Robot interface: yes E 67 Bi metal: yes 12 pneumatic controls 16 hot runners Colorator interface; bi-material interface; compression injection interface Graph track Power master type lamination

Clamping force kN 2400 Mould thickness mm 460-800 Opening stroke mm 0-510 Distance between tie-bars V/H mm/mm 630/630 Stroke, injection unit mm 550 Nozzle contact force KN 78 Screw diameter mm 60 Injection pressure bar 1534 Max. injection volume cm3 565 ø centring ring mm 160 ø mould release bar (=standard) mm M16-M20 Max. cylinder temperature °C 400 SW release bar mm 32 - 36 - 41 ø clamping screw M20 Robot Yes

Clamping force kN 2000 Mould thickness mm 200-500 Minimum mould diameter mm 315 Opening stroke mm 200-480 Distance between tie-bars V/H mm/mm 510/430 Stroke, injection unit mm 470 Nozzle contact force KN 75 Screw diameter mm 55 Injection pressure bar 1751 Max. injection volume cm3 465 ø centring ring mm 125 ø mould release bar (=standard) mm M16-M20 Max. cylinder temperature °C 400 SW release bar mm 32 - 36 - 41 ø clamping screw M16 Robot Yes

Clamping force [kN] 3000 Dimensions of mounting plates (hxv) [mm] 1060 x 1120 Clearance between columns (hxv) [mm] 720 x 720 min./ max. mold height [mm] 400 - 750 Maximum opening width [mm] 1100 injection unit Screw diameter [mm] 62 Injection volume [cm3] 749 Injection weight [g] 680 Injection pressure [bar] 2100

Preform Weight (Max): 30,5 g // Neck Type: PCO

容量： 0 t （1） 水平 / （2） 垂直： 0 行程： 0 mm 套筒长度最大： 0 mm CNC 品牌： 0 CNC 型号： 0 技术数据 锁模力： 150 到 冲程 体积： 201 cm3 顶出行程： 150 mm 顶出力： 49 kN 材料压力： 2218 bar 螺杆直径： 40 mm 从： 20 rpm 到： 300 rpm 模具加热： 20 kW 螺杆传动：30 kW 机器重量约：9000 kg 整机尺寸：长度： 5700 mm 宽度：1650 mm 高度：2220 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 55 mm - Clamping force: 2400 kN - Shot weight max: 456 g - Injection rate: 2.375 cm?/s - Injection pressure: 1.890 bar - Injection volume: 475 cm? - Screw L/D ratio: 22,7 - Nozzle stroke / force max.: 88 mm / kN - Mould opening stroke max: 510 mm - Mould height max: 800 mm - Mould height min: 260 mm - Distance between tie-bars (h x v): 630 x 630 mm - Mold opening force: 534 kN - Core pulls: 0 - Oil tank capacity: 420 l - Operating hours: 0 - Power: installed max: 55 kW - Weight: 15.800 kg - Dimensions (long x wide x high): 7.208 x 2.075 x 2.187 mm