二手 KRAUSS MAFFEI 出售

Two twin machines available Fully hydraulic closing system. MC 4 control system with color monitor, integrated control panel and built-in disk drive. Plasticizing system 1 complete plasticizing system for thermoplastics with a screw diameter of 90 mm, with a return lock and an open nozzle. Closing system: Clamping force: 5000 kN Mold opening force, max.: 280 kN Movable pressure plate Sliding force Opening: 137 kN Movable pressure plate Sliding force Closing: 116 kN Mold plate size (hxv): 1270mm x 1200mm Distance between columns (hxv): 900 mm x 800 mm Mold opening stroke: 1170 mm Min. mold height: 480 mm Maximum opening path: 1650 mm Hydraulic ejector - stroke: 250 mm Forward/reverse ejection force: 92548 kN injection unit Screw diameter: 90 mm Injection pressure: 1742 bar Injection volume : 1953 cm³ Injection weight, PS: 1777 gr Injection rate: 649cc/sec Screw spee ...

Clamping force [kN] 8000 Dimensions of mounting plates (hxv) [mm] 1610 x 1250 Clearance between columns (hxv) [mm] 1120 x 1000 min./ max. mold height [mm] 600 - 2000 Maximum opening width [mm] 2000 injection unit Screw diameter [mm] 130 Injection volume [cm3] 6172 Injection weight [g] 5617 Injection pressure [bar] 1296 Dimensions and weight Net weight with control cabinet [t] 55 Dimensions (L x W x H) [m] 10.50 m x 2.65 m x 2.40 m

Krauss Maffei KM 125-390 C2+ injection molding machine Year of production - 1999 Fully hydraulic closing system. MC 4 control system with color monitor, integrated control panel and built-in disk drive. Plasticizing system complete plasticizing system for thermoplastics with a screw diameter of 40 mm Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF THE MACHINE IN STANDARD VERSION Closing unit – Mold clamping force: kN 1250 – Mold opening force: kN 70 – Dimensions of the mounting plate (h x v): mm 745 x 770 – Clearance between columns (h x v): mm 470 x 470 – Mold opening stroke: mm 600 – Minimum mold height: mm 300 – Opening width: mm 900 – Ejector stroke: mm 150 – Ejector force forward/reverse: kN 22 / 10 injection unit – Screw diameter: mm 40 – Ls/D ratio: – 20 – Injection pressure: 1860 bar – Injection volume: cm3 204 – Inject ...

Clamping/injection matrix Maximum opening width [mm] 1300 Injection unit Screw diameter [mm] 80 Injection volume [cm3] 1433 Shot weight [g] 1304 Injection pressure [bar] 1829 Electro-hydraulic equipment Power rating of the pump motor [kW] 75 Power rating of barrel heating [kW] 36 Dimensions and weight (approximately) Net weight with control cabinet [t] 15.3 Dimensions (L x W x H) [m] 6,91 m x 2,20 m x 2,41 m

Clamping force: 125 tons Closure system: hydraulic Plate dimensions (H x V): 805x770 mm Dimensions between guide bars (H x V): 530x470 mm Mold min. thickness: 300 mm Screw diameter: 45 mm Injection volume: 275 cm3 Injection weight in PS: 250 g Pressure on material: 1878 bar Length x Width x Height: 4,48 x 1,5 x 2,2 m Weight: 7690 kg Year: 2005 Equipment: Hydraulic ejector Ejector stroke: 150 mm Ejector force: 22,6/9,9 kN Cooling circuits: 6

Dimensions and weight Net weight with control cabinet [t] 7.69 Dimensions (length x width x height) [m] 4.48 x 1.5 x 2.2 Closing unit Clamping force [kN] 1250 Dimensions of mounting plates (hxv) [mm] 805 x 770 Clearance between columns (hxv) [mm] 530 x 470 Min./max. mold height [mm] min. 300mm Injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878

INJECTION UNIT Screw diameter: 45 mm Calculated injection volume: 258 cm³ Length / diameter ratio: 18 L / D Pressure on the material: 1469 bars CLOSING UNIT Closing force: 1300 kN Passage between columns: 405 x 405 mm Tray size: 610 x 610 mm

Krauss Maffei KM 300-1000 CX injection molding machine Year of production - 2010 Fully hydraulic closing system. MC 5 control system with color monitor, integrated control panel and built-in disk drive. SP 1000 plasticizing system complete plasticizing system for thermoplastics with a screw diameter of 50 mm, with a return lock and an open nozzle Nozzle radius 15 mm, nozzle opening 3 mm. Closing unit – Mold clamping force: kN 3000 – Mold opening force: kN 169 – Dimensions of the mounting plate (h x v): mm 995 x 1050 – Clearance between columns (h x v): mm 630 x 630 – Mold opening stroke: mm 820 – Minimum mold height: mm 330 – Opening width: mm 1150 – Ejector stroke: mm 200 – Ejector force forward/reverse: kN 58/28 injection unit – Screw diameter: mm 50 – Ls/D ratio: – 22.0 – Injection pressure: bar 2304 – Injection volume: cm3 432 – Inje ...

Krauss Maffei KM 200-1000 CX Year of production - 2021 Fully hydraulic locking system. MC 6 control system based on an industrial computer in real-time Ethernet technology, equipped with an integrated 21.5 ″ control panel with a color touch screen. Plasticizing system 1 complete plasticizing system for thermoplastics with a screw diameter of 55 mm, with back-lock and open nozzle Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF THE MACHINE IN STANDARD EXECUTION Closing unit - Mold clamping force: 2000 kN - Mold opening force: 101 kN - Mounting plate dimensions (h x v): mm 915 x 915 - Clearance between columns (h x v): mm 560 x 560 - Mold opening stroke: mm 700 - Minimum mold height: mm 350 - Opening width: mm 1050 - Ejector stroke: mm 200 - Ejector force forward / reverse: 58/28 kN Injection unit - Screw diameter: mm 55 - Ls / D ratio: - 20.0 - Injection pres ...

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 154 cm³ Length / diameter ratio: 23 L / D Pressure on the material: 2429 bars CLOSING UNIT Closing force: 1100 kN Passage between columns: 430 x 470 mm Tray size: 760 x 770 mm

Closing unit Clamping force [kN] 6500 Dimensions of mounting plates (hxv) [mm] 1530 x 1450 Clearance between columns (hxv) [mm] 1000 x 930 min./ max. mold height [mm] 400 / - Maximum opening width [mm] 1550 injection unit Screw diameter [mm] 80 Injection volume [cm3] 1543 Injection weight [g] 1404 Injection pressure [bar] 2205 Electric-hydraulic equipment Pump motor rated power [kW] 110 Heater power [kW] 59 Dimensions and weight Net weight with control cabinet [t] approx. 45.7 Dimensions (L x W x H) [m] approx. 9.98 x 2.78 x 2.43

Closing unit Clamping force [kN] 500 Dimensions of mounting plates (hxv) [mm] 600 x 600 Clearance between columns (hxv) [mm] 370 x 370 min./ max. mold height [mm] 200 / - Maximum opening width [mm] 600 injection unit Screw diameter [mm] 22 Injection volume [cm3] 38 Injection weight [g] 35 Injection pressure [bar] 2500 Electric-hydraulic equipment Nominal power of the pump motor [kW] 11 Heater power [kW] 6.3 Dimensions and weight Net weight with control cabinet [t] approx. 2.7 Dimensions (L x W x H) [m] approx. 3.53 x 1.41 x 1.96

Krauss Maffei KM 110-520 C1 injection molding machine Year of production - 2004 Fully hydraulic locking system. MC4 control system with color monitor, integrated control panel and built-in disk drive Plasticizing system 1 complete plasticizing system for thermoplastics, abrasive version, 45 mm screw diameter, with backlatch and open nozzle TECHNICAL DATA OF THE MACHINE IN STANDARD EXECUTION Closing unit: - Mold closing force: 1100 kN - Mold opening force: 70 kN - Movement force of the movable plate clamping the mold - - - opening: 35 kN - closing: kN 28 - Mounting plate dimensions (h x v): mm 745 x 770 - Clearance between columns (h x v): mm 470 x 470 - Way of opening the mold: mm 600 - Mold development height: mm 300 - Opening width: mm 900 - Ejector stroke: mm 150 - Ejector force: 22/10 kN Injection unit: - Screw diameter: mm 45 - Injection pressure: 1878 bar - In ...

MC5 control system with color monitor, integrated control panel and built-in disk drive. Plasticizing system 1 complete plasticizing system for thermoplastics with a screw diameter of 50 mm TECHNICAL DATA Closing unit - Mold clamping force: 1760 kN - Mounting plate dimensions (h x v): mm 790 x 740 - Clearance between columns (h x v): mm 560 x 510 - Way of opening the mold max: mm 450 - Height of the mold development min./max: mm 200/600 - Plate opening stroke: mm 1050 - Ejector stroke: mm 130 - Ejector force: 49 kN Injection unit - Screw diameter: mm 50 - Ls / D ratio: 20.2 - Injection pressure: 1892 bar - Injection volume: cm3 393 - Injection weight for PS: 357 g - Injection capacity: cm3 / s 314 - Number of screw revolutions, max: rpm 320 - Nozzle clamping force: 29.4 kN Electrical parameters - Connection value: kW 38 - Heaters power: kW 15.6 - Number of cylind ...

For sale a complete extrusion line in good condition, produced in 2004 by A + G Austria. Extruder KMD110 (Krauss Muffai) 1996 The line is designed for the production of a PVC window sill, 500mm wide, as well as a seamless panel with a width of 250mm. The appropriate extrusion tool is available. Line productivity 350kg / hour. The line allows you to process highly filled mixtures at a low cost. The set includes a screw loader. The cylinder augers after replacement have worked for 6 months

Krauss Maffei KM 650 - 3500 C2 Injection molding machine Year of production - 1999 Location - Poland MC control type 4 Unit crimping Crimping force 6500 kN Tool opening force, max. 346 kN The size of the plates (height x height) 1620 x 1470 mm clearance between columns (height x height) 1000 x 930 mm mold opening path 1150 mm mold mounting height min. Opening width 540 mm 1690 mm Ejector stroke 250 mm Ejector force forward / reverse 226 kN Injection unit Screw diameter 90 mm Ls / D ratio 20 Injection pressure 1742 bar shot weight 1742 g Plasticizing flow max. 83 g / sec nozzle pressure 173 kN Electro-hydraulic devices Rated power of the pump motor 90 kW Installed heating power of 36 kW Cylinder heating control zones 7 Oil filling 1240 ltr. Dimensions and weights Space requirement approx. 9.06 x 2.85 x 2.60 m Gross weight is 30,870 kg Tool weight 11400 kg

Clamping force [kN] 4200 Dimensions of mounting plates (hxv) [mm] 1310 x 1200 Clearance between columns (hxv) [mm] 800 x 800 min./ max. mold height [mm] 580 - 1600 Maximum opening width [mm] 1020 injection unit Screw diameter [mm] 70 mm Injection volume [cm3] 1047 Injection weight [g] 953 Injection pressure [bar] 1778 Electric-hydraulic equipment Pump motor rated power [kW] 75 Heater power [kW] 30 Dimensions and weight Net weight with control cabinet [t] 22 Dimensions (L x W x H) [m] 6.38 m x 2.33 m x 2.48 m

Clamping Force: 650 ton // Shot Weight (Max): 1312 g

二手机器状况良好。可立即交付�

二手机器状况良好。可立即交付�

周期时间： ?28 克 （48 腔） ： 24~25 秒 ?56 克 （48 腔） ： 25~26 秒 包括 - 模具，48腔，27g，用于250ml和300ml（牛奶瓶），霉菌不� ��常使用。 - 包括YUDO侧入机器人。 - 螺杆直径：105毫米 - 最大注射重量：3.950克 - 注射压力：1.280巴 - 锁模力：4.500 kN - 最大开模行程：820 mm - 拉杆间距 h： 850 mm - 拉杆间距 v： 740 mm - 功率：安装最大：390千�

二手机器状况良好。可立即交付。 - 螺杆直径：30毫米 - 最大射针重量：77克 - 注射压力：2.500巴 - 注射量：85厘米？ - 喷射器行程/力最大： 22 / 10 mm / kN - 压板间距最大： 550 mm - 加热区：3.200 x 1.310 x 1.800 - 压板尺寸 （高 x v）： 540 x 540 mm - 拉杆之间的距离 （高 x 深）： 321 x 321 mm - 开模力：40 kN - 控制：MC4 - 油箱容量：170升 - 功率：安装最大：15千瓦 - 营业时间：55.000 - 重量：2.300公�

ROBOT ENGEL ERC65 X-axis 800 (EUROMAP standar) Y-axis 1400 Z-axis: 2840 A-axis C-axis 2 x vacuum 3 x gripper - Screw diameter: 60 mm - Shot weight max: 650 g - Injection volume: 769 cm? - Screw L/D ratio: 23 - Ejector stroke / force max.: 250 / mm / kN - Clamping force: 3.500 kN - Mould opening stroke max: 1.300 mm - Mould height max: 920 mm - Mould height min: 380 mm - Daylight between platens max: 1.300 mm - Platen size (h x v): 1.060 x 1.095 mm - Cascades / Sequential valve gates: 6 - Distance between tie-bars (h x v): 710 x 710 mm - Control: MC 4 - Core pulls: 5 - Power: installed max: 55 kW - Dimensions (long x wide x high): 6.500 x 2.100 x 2.380 mm - Weight: 15.500 kg