| 描述: |
注塑马 Krauss Maffei KM 300-1000 CX
二手机
Krauss Maffei KM 300-1000 CX injection molding machine
Year of production - 2010
Fully hydraulic closing system. MC 5 control system with color
monitor, integrated control panel and built-in disk drive.
SP 1000 plasticizing system
complete plasticizing system for thermoplastics with a screw diameter
of 50 mm, with a return lock and an open nozzle
Nozzle radius 15 mm, nozzle opening 3 mm.
Closing unit
– Mold clamping force: kN 3000
– Mold opening force: kN 169
– Dimensions of the mounting plate (h x v): mm 995 x 1050
– Clearance between columns (h x v): mm 630 x 630
– Mold opening stroke: mm 820
– Minimum mold height: mm 330
– Opening width: mm 1150
– Ejector stroke: mm 200
– Ejector force forward/reverse: kN 58/28
injection unit
– Screw diameter: mm 50
– Ls/D ratio: – 22.0
– Injection pressure: bar 2304
– Injection volume: cm3 432
– Injection weight 1): g 393
– Injection speed: mm/s 170
– Injection efficiency: cm3/s 334
– Number of screw revolutions, standard: rpm 370
– Plasticizing E661673 efficiency 1):
– at standard screw speeds: g/s 54.3
Electro-hydraulic equipment
– Pump motor rated power: kW 45
– Installed heater power: kW 18.7
– Number of cylinder heating zones: – 5
– Dry cycle time / stroke according to Euromap 6 2): s/mm 2.8 /
441
– Oil tank capacity: dm3 720
Dimensions and weight
– Net weight with control cabinet: t 12.5
– Machine dimensions (L x W x H) 3): m 6.11 x 2.17 x 2.25
seller
offer No. resale P230313180
|