933 offers krauss maffei km

Category: 301 injection moulding machines
Latest update: 08.06.2024 add to watchlist
approved
dealer
item-No.: 164174305
New in: 2008

used

check Seller: Surplex GmbH
Location: Nové Modlany Land-cz
Price: used machinery auction RESALE 9.900 € add to watchlist

Description: closing force: ,1200 kN auger diameter: ,35 mm ejection stroke: ,160 mm batch volume: ,61,09 cm3 injection speed: ,288,6 cm3/s injection pressure: ,2429 bar Approx. Onsite Dimension. (l x w x h): 6,000 x 1,700 x 2,000 mm, weight approx.: 9,700 kg

Category: 301 injection moulding machines
Latest update: 08.06.2024 add to watchlist
approved
dealer
item-No.: 164196179
New in: 2013

used

check Seller: Surplex GmbH
Location: Hodonin Land-cz
Price: used machinery auction RESALE 1 € add to watchlist

Description: working hours: approx. 41041 hrs. 3axis robot serial number: 2112257 IMM type: Thermoset IMM serial number: 51019359 clamping force: 160 tons production type: reflector screw type: BMC screw diameter: 35 mm barrel capacity: 115 cm3 max. spec. injection pressure: 1488 max. stroke opening: 950 mm max. mould thickness: 950 mm min. mould thickness: 300 mm tie bars distance horizontal: 520 mm tie bars distance vertical: 520 mm locating ring size FH: 200 mm locating ring size MH: 200 mm max. ejector stroke: 75 mm max. ejector layout: 205 mm QMC type: manual total installed power: 80 kW  , please also have a look at the video of this machine Approx. Onsite Dimension. (l x w x h): 1,800 x 4,600 x 3,100 mm, weight approx.: 11,700 kg

Category: 301 injection moulding machines
Latest update: 08.06.2024 add to watchlist
approved
dealer
item-No.: 164241120
New in: 1994

used

check Seller: Surplex GmbH
Location: Celje Land-si
Price: used machinery auction RESALE 2.350 € add to watchlist

Description: serial number: 44278  , seq.num: KM18 , controller type: MC3 , num. Euromap: 12 , num. hydraulics: 1 , num. hot nozzle: 2 diam. screw: 30 , max. pressure: 2222 , max. volume: 74 , Approx. Onsite Dimension. (l x w x h): 3,200 x 1,300 x 1,900 mm, weight approx.: 3,000 kg

Category: 301 injection moulding machines
Latest update: 08.06.2024 add to watchlist
approved
dealer
item-No.: 164241121
New in: 1998

used

check Seller: Surplex GmbH
Location: Celje Land-si
Price: used machinery auction RESALE 4.950 € add to watchlist

Description: serial number: 174298  , seq. num: KM14 , controller type: MC3F , num. Euromap: 12 , num. hydraulics: 2 , num. Air: 1 , diam. screw: 55 , max. pressure: 1904 , max. volume: 523  , Approx. Onsite Dimension. (l x w x h): 5,200 x 1,900 x 2,250 mm, weight approx.: 9,500 kg

Category: 301 injection moulding machines
Latest update: 08.06.2024 add to watchlist
approved
dealer
item-No.: 164241122
New in: 1999

used

check Seller: Surplex GmbH
Location: Celje Land-si
Price: used machinery auction RESALE 3.900 € add to watchlist

Description: serial number: 64975  , seq. num: KM02 , controller type: MC3F , num. Euromap: 12 , num. hydraulics: 1 , num. hot nozzle: 4 , diam. screw: 30 , max.pressure: 2500 , max. volume: 85 , Approx. Onsite Dimension. (l x w x h): 3,810 x 1,400 x 2,000 mm, weight approx.: 3,000 kg

Category: 301 injection moulding machines
Latest update: 08.06.2024 add to watchlist
approved
dealer
item-No.: 164241123
New in: 1999

used

check Seller: Surplex GmbH
Location: Celje Land-si
Price: used machinery auction RESALE 3.900 € add to watchlist

Description: serial number: 34105  , seq. num: KM01 , controller type: MC4 , num. hot nozzle: 4 , diam. screw: 22 , max. pressure: 2600 , max. volume: 41.8 , Approx. Onsite Dimension. (l x w x h): 3,300 x 1,300 x 1,800 mm, weight approx.: 2,300 kg

Category: 301 injection moulding machines
Latest update: 08.06.2024 add to watchlist
approved
dealer
item-No.: 164241124
New in: 1998

used

check Seller: Surplex GmbH
Location: Celje Land-si
Price: used machinery auction RESALE 3.900 € add to watchlist

Description: serial number: 64181  , seq.num: KM03 controller type: MC3F , num. Euromap: 12 , num. hydraulics: 1 , num. Air: 1 , num. hot nozzle: 8 , diam. screw: 35 , max. pressure: 2156 , max. volume 156 , Approx. Onsite Dimension. (l x w x h): 3,300 x 1,200 x 1,900 mm, weight approx.: 2,200 kg

Category: 301 injection moulding machines
Latest update: 07.06.2024 add to watchlist
item-No.: 162905150
New in: 1990

used

Seller: Exapro
Location: Land-fr
Price: 31.500 € add to watchlist

Krauss KM 1000-5700 M Injection Moulding Machine The machine is not in used after the maintenance was done 3-4 years ago.Plastic parts (some gaskets and O-rings) will need to be overhauled due to waiting time. Last service history: It was stated that there was a problem with the injection ratio. It has been reported that there is no electricity to the proportional valve. The electronic card has been sent to the service. In the service check, we were told that the card was working without any problems. To sum up, it needs some maintenance

Category: 310 spare parts for plastic machinery
Latest update: 27.05.2024 add to watchlist
approved
dealer
item-No.: 91028340

used

check Seller: Maschinenhandel Borowski GmbH
Location: Land-de

add to watchlist

used spare part IMM - Column warehouse no.: 501285 manufacturer: KRAUSS MAFFEI Typ: Saeule year of construction: neu Column for intensifier match the machine size Krauss Maffei 501285 There are a total of 6 columns available, they are brand new and unused. Total length 965 mm, diameter 124 mm piston, piston rod diameter 85 mm.

Category: 301 injection moulding machines
Latest update: 07.06.2024 add to watchlist
item-No.: 162905161
New in: 2000

used

Seller: Exapro
Location: Land-fr
Price: 5.200 € add to watchlist

Krauss Maffei KM90/50-190 CD injection molding machine The machine was working in a CD production line

Category: 301 injection moulding machines
Latest update: 07.06.2024 add to watchlist
item-No.: 162905209
New in: 2001

used

Seller: Exapro
Location: Land-fr
Price: 24.000 € add to watchlist

Injection moulding machine Krauss Maffei KM200-1400C1 Clamping force 200 Ton Distance between columns : 550 cm x 550 cm

Category: 302 extruders
Latest update: 07.06.2024 add to watchlist
item-No.: 162905428
New in: 1998

used

Seller: Exapro
Location: Land-fr
Price: 67.000 € add to watchlist

Krauss Maffei KMD 130-23 extruder Capacity : 1 Ton per hour Suitable for granule

Category: 302 extruders
Latest update: 07.06.2024 add to watchlist
item-No.: 162905435
New in: 1996

used

Seller: Exapro
Location: Land-fr
Price: 80.000 € add to watchlist

Krauss Maffei KMD 2-110 PVC Extruder Machine Hourly capacity : 450-600 KG PLC Control

Category: 301 injection moulding machines / Multi component injection moulding machines
Latest update: 23.11.2023 add to watchlist
approved
dealer
item-No.: 121653239
New in: 2009

used

check Seller: TMS CO.,LTD
Location: Land-kr

add to watchlist

Krauss Maffei bi-material KM1600/12000/8100 MX -Clamping force : 1300 ton -Manufactured year : 2007~2009 -Quantity : 12 units

Category: 301 injection moulding machines
Latest update: 07.06.2024 add to watchlist
item-No.: 163591510
New in: 2006

used

Seller: Exapro
Location: Land-tr
Price: 130.000 € add to watchlist

Krauss Maffei KM800-8100 MX Injection Moulding Machine With Robot 3300 gr(PS) Min-Max mould thickness : 500-1100 mm Distance between column : 1120 mm x 1000 mm Screw diameter : 95 mm

Category: 301 injection moulding machines / PET Preforming machines
Latest update: 23.11.2023 add to watchlist
approved
dealer
item-No.: 148109490
New in: 2010

used

check Seller: TMS CO.,LTD
Location: Land-kr

add to watchlist

KRAUSS MAFFEI KM450-4500 CS PET (450 ton) year `2010 for PET preform Location : Korea

Category: 301 injection moulding machines / Injection molding machines
Latest update: 23.11.2023 add to watchlist
approved
dealer
item-No.: 161190850
New in: 2014

used

check Seller: TMS CO.,LTD
Location: Land-kr

add to watchlist

KRAUSS MAFFEI KM3200/24500 (3200 ton) injection molding machines for bumper. For more information, contact by email (koma7240daum.net) or whatsapp (+821037187243)

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 29.11.2023 add to watchlist
approved
dealer
item-No.: 161457901
New in: 2007

used

check Seller: SWISSBID IBS MACHINES AG
Location: 4132 Muttenz Land-ch

add to watchlist

1,0 St. gebr. Injection molding machine with turntable, lateral unit from medical technology Manufacturer: KRAUSS MAFFEI Type: KM100/180CX Year of construction: 2007 Clamping force: 100 tons Tie bar spacing: 370 x 370 mm Screw DN 1: 25 mm Displacement: 59 cm³ Moulded part weight: 54 g/hp Screw DN 2: 15 mm Displacement: 14 cm³ Moulded part weight: 13 g/hp Control: MC5 Equipment of the machine: -Interface robot -Additional control pump -2.0 ST. Core pulls

Category: 301 injection moulding machines / Multi component injection moulding machines
Latest update: 16.02.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 162126100
New in: 2010

used

check Seller: TMS CO.,LTD
Location: Land-kr

add to watchlist

KRAUSS MAFFEI two shot (2k) KM1300-12000/8000 MX machines -Clamping force : 1300 ton

Category: 301 injection moulding machines
Latest update: 07.06.2024 add to watchlist
item-No.: 162905282
New in: 2002

used

Seller: Exapro
Location: Land-fr
Price: 28.500 € add to watchlist

Three injection molding machines Krauss Maffei Model KM200-1000C2 Year of manufacture 2002 Total working hours hours 57344/64716/54374 Total production time h 54540/61077/51379 Origin Germany Closing Unit Closing Force 2000 Kn (200T) Inner width between columns (hxv) 560x560 mm Mold opening way 700 mm Min. Mold height 350 mm Pusher distance 200 mm Pusher forward force 58 Kn Injection Unit SP1000 Screw diameter 55 mm L / D ratio 20 Volume 523 Cm3 Weight (PS) 476 g Pump power 37 kw Heater power 18 kw Weight ca. 10 t Length x Width x Height 5320x1750x2230 mm price for one machine

Category: 301 injection moulding machines
Latest update: 07.06.2024 add to watchlist
item-No.: 163513955
New in: 2001

used

Seller: Exapro
Location: Land-pl

add to watchlist

Krauss Maffei KM650-5700CM Closing unit Clamping force [kN] 6500 Dimensions of mounting plates (hxv) [mm] 1550 X 1440 Clearance between columns (hxv) [mm] 1000 X 930 Min./max. mold height [mm] min 600 Maximum opening width [mm] 1750 Injection unit Screw diameter [mm] 95 Injection volume [cm3] 2956 Injection weight [g] 2111 Injection pressure [bar] 1795 Electrical and hydraulic equipment Rated power of the pump motor [kW] 110 Heater power [kW] 59 Dimensions and weight Net weight with control cabinet [t] 39.5 Dimensions (L x W x H) [m] 9.36 x 2.65 x 2.43

Category: 301 injection moulding machines / Injection molding machines
Latest update: 31.05.2024 add to watchlist
approved
dealer
item-No.: 164005876
New in: 1998

used

check Seller: INDUSTRIALMAK MACHINES SL
Location: 08980 Sant Feliu de Llobregat Land-es

add to watchlist

KRAUSS MAFFEI KM250-1000C1 (1998) Clamping force: 2500 kN Mold opening force: 160 kN Traversing force opening/closing platen: 86 kN Clamping platen (hxv): 995 x 1050 mm. Clear width (hxv): 630 x 630 mm. Mold opening stroke: 820 mm. Mold installation height min: 330 mm. Maximum daylight: 1150 mm. Ejector stroke: 200 mm. Ejector force forward/back: 58 kN Injection unit: SP1000C Screw diameter: 55 Ls/D Ratio: 20 Injection pressure: 1904 bar. Swept volume: 523 cm3 Shot weight PS: 476 gr. Injection flow: 428 cm3/s Screw speed. Standard/ZE: 65/80 1/min Plasticizing flow: 58/83 Nozzle contact force: 110 kN Pump motor rated output: 45 kW Installed heating capacity: 19 kW Control zones, barrel heating: 5 Oil filling: 720 l. Max mold weight: 3430 kg. Dimensions: Net weight with control cabinet: 12.500kg Length x Width x Height: 5.97 x 1.04 x 2.36 m

Category: 301 injection moulding machines / Injection molding machines
Latest update: 31.05.2024 add to watchlist
approved
dealer
item-No.: 164005877
New in: 2001

used

check Seller: INDUSTRIALMAK MACHINES SL
Location: 08980 Sant Feliu de Llobregat Land-es

add to watchlist

KRAUSS MAFFEI KM200-1400C1 (2001) MC4 control Clamping force: 2000 kN Mold opening force: 101 kN Traversing force opening/closing platen: 42 kN Clamping platen (hxv): 915 x 915 mm. Clear width (hxv): 560 x 560 mm. Mold opening stroke: 700 mm. Mold installation height min: 350 mm. Maximum daylight: 1050 mm. Ejector stroke: 200 mm. Ejector force forward/back: 28 kN Injection unit: SP51400 Screw diameter: 60 Ls/D Ratio: 21 Injection pressure: 2000 bar. Swept volume: 679 cm3 Shot weight PS: 618 gr. Injection flow: 325 cm3/s Screw speed. Standard/ZE: 259/368 1/min Plasticizing flow: 58/83 Nozzle contact force: 110 kN Pump motor rated output: 45 kW Installed heating capacity: 23 kW Control zones, barrel heating: 5 Dry cycles: 1400 (Euromap 6) Oil filling: 525 l. Dimensions: Net weight with control cabinet: 10.500kg Length x Width x Height: 5.69 x 1.90 x 2.24 m.  ...

Category: 301 injection moulding machines / Injection molding machines
Latest update: 31.05.2024 add to watchlist
approved
dealer
item-No.: 164005878
New in: 2000

used

check Seller: INDUSTRIALMAK MACHINES SL
Location: 08980 Sant Feliu de Llobregat Land-es

add to watchlist

KRAUSS MAFFEI KM150-1000C1 (2000). Clamping force: 1500kN Mold opening force: 86 kN Traversing force opening/closing platen: 45/34 kN Clamping platen (hxv): 780 x 790 mm. Clear width (hxv): 500 x 500 mm. Mold opening stroke: 600 mm. Mold installation height min: 300 mm. Maximum daylight: 900 mm. Ejector stroke: 150 mm. Ejector force forward/back: 22/10 kN Injection unit: SP1000 Screw diameter: 55 Ls/D Ratio: 20 Injection pressure: 1904 bar. Swept volume: 532 cm3 Shot weight PS: 476 gr. Injection flow: 197 cm3/s Screw speed. Standard/ZE: 194/272 1/min Plasticizing flow: 35/49 Nozzle contact force: 110 kN Pump motor rated output: 30 kW Installed heating capacity: 19 kW Control zones, barrel heating: 5 Dry cycles: 1800 (Euromap 6) Oil filling: 345 l. Dimensions: Net weight with control cabinet: 7600 kg Length x Width x Height: 4.99 x 1.51 x 2.19 m. Max mold  ...

Category: 301 injection moulding machines / Injection molding machines
Latest update: 31.05.2024 add to watchlist
approved
dealer
item-No.: 164005879
New in: 1998

used

check Seller: INDUSTRIALMAK MACHINES SL
Location: 08980 Sant Feliu de Llobregat Land-es

add to watchlist

KRAUSS MAFFEI KM 125-520C1 (1998) Clamping force: 1250 kN Mold opening force: 70 kN Traversing force opening/closing platen: 35/28 kN Clamping platen (hxv): 745 x 770 mm. Clear width (hxv): 470 x 470 mm. Mold opening stroke: 600 mm. Mold installation height min: 300 mm. Maximum daylight: 900 mm. Ejector stroke: 150 mm. Ejector force forward/back: 10 kN Injection unit: SP520 Screw diameter: 45 Ls/D Ratio: 20 Injection pressure: 1878 bar. Swept volume: 275 cm3 Shot weight PS: 250 gr. Injection flow: 159 cm3/s Screw speed. Standard/ZE: 307/391 1/min Plasticizing flow: 31/40 Pump motor rated output: 18.5 kW Installed heating capacity: 13 kW Control zones, barrel heating: 5 Dry cycles: 1900 (Euromap 6) Oil filling: 345 l. Dimensions: Net weight with control cabinet: 6.000kg Length x Width x Height: 4.48 x 1.51 x 2.19 m. Max mold weight: 1485 kg. Plasticizing u ...

Category: 302 extruders
Latest update: 08.06.2024 add to watchlist
approved
dealer
item-No.: 164243930
New in: 1996

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control.

Category: 301 injection moulding machines
Latest update: 08.06.2024 add to watchlist
item-No.: 164247756
New in: 2007

used

Seller: 01machinery s.r.l.

add to watchlist

Category: 301 injection moulding machines / Injection molding machines
Latest update: 26.02.2024 add to watchlist
approved
dealer
item-No.: 161135701
New in: 2011

used

check Seller: Spritzgussmaschinen-Handel Makies GmbH
Location: Land-de

add to watchlist

Here we offer a well-maintained injection moulding machine. Manufacturer / Type:BOY Type: XS (100-14) Serial No.:will be communicated in case of interest Year of manufacture:2015 Operating hours:25.000 h Version:Procan Alpha 2 / S1 Clamping unit Clamping force:100kN tie bar distance:160 x 110mm (2 tie bars) Mould installation height min.:100mm Platen distance max:250mm Ejector stroke:50mm Injection unit: Injection unit:cylinder ø14mm Shot weight max.:6,1 g/PS Injection flow:22g/sec Spec. injection pressure:2298 bar Sprue extractor integrated Dimensions & weights: Weight with control cabinet: 485 kg. Length: 1480mm Width (machine only):520mm Height min - max:1380 - 1690mm Oil capacity:28 L The visible mini-laminar flow unit and the stainless steel area cover belong to the machine Other possibly visible peripheral devices do not belong to t ...

Category: 302 extruders
Latest update: 07.06.2024 add to watchlist
item-No.: 162905339
New in: 2004

used

Seller: Exapro
Location: Land-fr
Price: 81.500 € add to watchlist

For sale a complete extrusion line in good condition, produced in 2004 by A + G Austria. Extruder KMD110 (Krauss Muffai) 1996 The line is designed for the production of a PVC window sill, 500mm wide, as well as a seamless panel with a width of 250mm. The appropriate extrusion tool is available. Line productivity 350kg / hour. The line allows you to process highly filled mixtures at a low cost. The set includes a screw loader. The cylinder augers after replacement have worked for 6 months

Category: 301 injection moulding machines
Latest update: 07.06.2024 add to watchlist
item-No.: 164154693
New in: 2011

used

Seller: Exapro
Location: Land-pl

add to watchlist

Clamping force [kN] 13000 Dimensions of mounting plates (hxv) [mm] 2210x1910 Clearance between columns (hxv) [mm] 1570x1270 Min./max. mold height [mm] 700-1400 Maximum opening width [mm] 3050 Injection unit Screw diameter [mm] 105 Injection volume [cm3] 4546 Injection weight [g] 4137 Injection pressure [bar] 2428 Electrical and hydraulic equipment Rated power of the pump motor [kW] 110 Heater power [kW] 59 Dimensions and weight Net weight with control cabinet [t] 64 Dimensions (length x width x height) [m] 12.11 x 3.65 x 2.68

Category: 301 injection moulding machines
Latest update: 07.06.2024 add to watchlist
item-No.: 164154696
New in: 2008

used

Seller: Exapro
Location: Land-pl

add to watchlist

Clamping force [kN] 11000 Dimensions of mounting plates (hxv) [mm] 2210x1910 Clearance between columns (hxv) [mm] 1550x1250 Min./max. mold height [mm] 600 - 1200 Maximum opening width [mm] 2000 Injection unit Screw diameter [mm] 120 Injection volume [cm3] 6786 Injection weight [g] 6175 Injection pressure [bar] 1758 Electrical and hydraulic equipment Rated power of the pump motor [kW] 132 Heater power [kW] 82 Dimensions and weight Net weight with control cabinet [t] 73 Dimensions (length x width x height) [m] 12.47 x 3.65 x 2.82

Category: 310 spare parts for plastic machinery
Latest update: 30.05.2024 add to watchlist
item-No.: 116883616

used

Seller: Plastic Product Hungary Kft.
Location: Land-hu
VS

add to watchlist

- Krauss Maffei MC3 EK 200 EUR 450 - Krauss Maffei MC3 KR 103 EUR 450 - Krauss Maffei MC3 LV 200 + LVR 10 EUR 600 - Krauss Maffei MC3 PR 201 EUR 450 - Krauss Maffei MC3 PR 202 EUR 450 - Krauss Maffei MC3 PV 200 EUR 450 - Krauss Maffei MC3 EPR10 EUR 250 - Krauss Maffei MC3 EPR11 EUR 200 - Krauss Maffei MC3 VU100 EUR 200 - Krauss Maffei MC3 KMV2 EUR 250 - Krauss Maffei MC3 CPU100 EUR 250 - Krauss Maffei MC3 BT100 EUR 250 - Krauss Maffei MC3 IA100 EUR 200 - Krauss Maffei MC3 IE200 EUR 200 - Krauss Maffei MC3 GDC EUR 300 - Krauss Maffei MC3 EPR20 EUR 250 - Krauss Maffei MC3 FD100 EUR 350

Category: 1107 other energy machinery
Latest update: 08.06.2024 add to watchlist
approved
dealer
item-No.: 162816603

used

check Seller: Theodor Eberlei GmbH & Co.KG
Location: 26215 Wiefelstede, DE Land-de

add to watchlist

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards -Manufacturer: Krauss Maffei, MC3 control of plug-in cards, printed circuit boards from injection molding machine -Power Supply / Converter: Elba euro module PCD 315 CP -Insert card: Krauss Maffei KR100 -Plug-in card: Krauss Maffei PV104 -Insert card: Krauss Maffei LV100 2 pcs. -Installation card: Krauss Maffei EK200 -Insert card: Krauss Maffei EK100 -Plug-in card: Krauss Maffei SP400 -Installation card: Krauss Maffei PR200 -Individual components: see photos -Price / sale: complete -Dimensions: 485/270/320 mm -Weight: 12.9 kg

Category: 310 spare parts for plastic machinery
Latest update: 02.01.2024 add to watchlist
approved
dealer
item-No.: 91028330

used

check Seller: Maschinenhandel Borowski GmbH
Location: 40764 Langenfeld Land-de

add to watchlist

warehouse no.: 501284 manufacturer: KRAUSS MAFFEI Typ: Saeule Nr. 6400007 year of construction: new Column for pressure intensifier match to the machine size Krauss Maffei KM 110 and KM 125. Total there are 6 columns available, they are brand new and unused. Overall length 1138 mm, piston diameter 140 mm, rod diameter 95 mm. Krauss Maffei Order No. 6400007 detailed description: Column for closing side of size KM 110 and KM 125 are to check the dimensions drawings with exact measurements available.

Category: 1200 machines and plants for process engineering / Centrifuges
Latest update: 08.01.2024 add to watchlist
approved
dealer
item-No.: 157548000

used

check Seller: COMQUIMA EUROPE
Location: 08108 Sant Fost de Campcentelles Land-es

add to watchlist

RECONDITIONED KRAUSS MAFFEI KM 125 ATEX CENTRIFUGE REF.: C3553 Vertical basket bottom discharge reconditioned centrifuge with scraper on inertia plate with 4 dampers discs type ZPVL 25-45.6 Type KM 125 manufactured by KRAUSS MAFFEI. AISI 316L wetted parts. General characteristics: Manufactured by KRAUSS MAFFEI Model KM 125 Type Vertical basket bottom discharge centrifuge with scraper Material Stainless steel 316L Weight 6400 kg Technical characteristics: Download Por el fondo con rascador Basket diameter 1.250 mm Height basket 650 mm Max. load 650 kg Useful load 500 dm3 Max. rotational speed 900 rpm Engine 37 kW - 50 cv

Category: 1107 other energy machinery
Latest update: 08.06.2024 add to watchlist
approved
dealer
item-No.: 162816600

used

check Seller: Theodor Eberlei GmbH & Co.KG
Location: 26215 Wiefelstede, DE Land-de

add to watchlist

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards -Manufacturer: Krauss Maffei, MC3 control plug-in cards circuit boards from injection molding machine -Temperature controller card: Gossen Pantatherm DS 4 3 pieces -DC-DC converter: Elba euro module PCD 54 CP on plug-in board: Krauss Maffei AN 100 -Prop.amplifier: Bosch 0 811 405 015 / 0 811 405 002 / 0 811 405 099 - Plug-in card: Krauss Maffei SK201 -Individual components: see photos -Price/sale: complete -Dimensions: 480/215/H270 mm -Weight: 4.8kg

Category: 301 injection moulding machines / Injection molding machines
Latest update: 07.06.2024 add to watchlist
approved
dealer
item-No.: 162870789
New in: 2003

used

check Seller: MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 9.525 € add to watchlist

KRAUSS MAFFEI KM 110-520 C1 injection moulding machine was built in Germany in 2003. The machine used in production plants produces top-quality plastic products using the injection moulding method, which involves feeding a plastic material of sufficient plasticity into an injection mould, which is then clamped with a high force of 110 tonnes. To ensure the highest possible operating efficiency and productivity, the machine uses reliable components, such as a powerful screw with a diameter of 45 mm and an ejector with a force of 22 kN. The KRAUSS MAFFEI KM 110/520 C1 injection moulding machine weights 6000 kg. Technical data of the KRAUSS MAFFEI KM 110-520 C1 injection moulding machine - mould clamping force: 110 t (1100 kN) - mould opening force: 7 t (70 kN) - injection volume: 275 cm3 - injection capacity: 159 cm3/s - injection pressure: 1878 bar - injection weight: 250 g - p ...

Category: 301 injection moulding machines
Latest update: 08.11.2013 add to watchlist
item-No.: 5097591
New in: 1999

used

Seller: Tecplast e. K. Machinery
Location: Mülheim an der Ruhr Land-de

add to watchlist

Product: injection molding machine Rubric: injection moulding machines Make/model: Krauss Maffei KM 320-1900 C3 Year of construction: 1999 Krauss Maffei injection moulding machine Type: KM 320-1900 C3 control: MC4 year: 1999 Clamping unit Clamping force t 320 Gap mm: 920 Holm dimension mm: 710 x 710 min/max height mm: 380 Plate size: 1060 x 1095 Injection unit Screw diameter mm: Gr 70 injection weight: 954 Injection volume cm m³: 1048 Spray pressure bar: 1778 Dimensions and weights Dimensions Lxwxh m: 6.75 X 2.15 X 2.4 machine weight kg: 16,300 Miscellaneous C3 SYSTEM EUROMAP 12 interface

Category: 301 injection moulding machines
Latest update: 18.03.2014 add to watchlist
item-No.: 5097593
New in: 2004

used

Seller: Tecplast e. K. Machinery
Location: Mülheim an der Ruhr Land-de

add to watchlist

Make/model: Krauss Maffei KM 450-3500 C3 Year of construction: 2004 Krauss Maffei injection moulding machine Type: KM 450-3500 C3, ACCU control: MC4 year: 2004 Clamping unit Clamping force t 450 Gap mm: 1170 Holm dimension mm: 900 x 800 min/max height mm: 480 Plate size: 1270 x 1230 Injection unit Screw diameter mm: 80 Injection weight gr: 1544 Injection volume cm m³: 1754 Spray pressure bar: 2205 Dimensions and weights Dimensions Lxwxh m: 7.98 x 2.35 x 2.55 machine weight kg: 26,000 Miscellaneous C3 system EUROMAP 12 interface

Category: 301 injection moulding machines
Latest update: 08.06.2024 add to watchlist
approved
dealer
item-No.: 163741644
New in: 2017

used

check Seller: GINDUMAC GmbH
Location: Land-cz

add to watchlist

This Krauss Maffei PX 121-540 injection moulding machine was made in the year 2017. It is equipped with a Krauss Maffei MC6 control unit. The machine has a clamping force of 1200 kN and screw diameter of 40 mm.

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 30.11.2023 add to watchlist
approved
dealer
item-No.: 153706098
New in: 2003

used

check Seller: Maschinenhandel Borowski GmbH
Location: Land-de

add to watchlist

KRAUSS MAFFEI KM 110-520 C1 warehouse no.: 503020 manufacturer: KRAUSS MAFFEI type: KM 110-520 C1 controller: MC4 year of construction: 2003 technical data clamping unit clamping force: 1100 kN distance between tie bars h:: 470 mm distance between tie bars v:: 470 mm size of mould plates h: 745 mm size of mould plates v: 770 mm min. mould height: 300 mm max. open daylight: 900 mm opening stroke: 600 mm ejector stroke: 150 mm ejector force: 22 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 1485 kg technical data injection unit screw diameter: 40 mm swept volume: 217 ccm injection pressure: 2377 bar screw length: 23 l/d screw speed: 307 min plasticising rate: 22 g/s PS injection rate into the open: 126 g/s PS number of heating zones: 5 measures & weight measures of machine lxbxh: 4.4m x 1.5 ...

Category: 1200 machines and plants for process engineering / Centrifuges
Latest update: 08.01.2024 add to watchlist
approved
dealer
item-No.: 157548004

used

check Seller: COMQUIMA EUROPE
Location: 08108 Sant Fost de Campcentelles Land-es

add to watchlist

USED KRAUSS MAFFEI HZ 630 PH CENTRIFUGE REF.: C6486 General characteristics: Manufactured by KRAUSS MAFFEI Model HZ 630 Ph Technical characteristics: Basket diameter 630 mm Max. rotational speed 2400 rpm

Category: 1200 machines and plants for process engineering / Centrifuges
Latest update: 08.01.2024 add to watchlist
approved
dealer
item-No.: 157562957

used

check Seller: COMQUIMA EUROPE
Location: 08108 Sant Fost de Campcentelles Land-es

add to watchlist

USED KRAUSS MAFFEI HZ125 CENTRIFUGE REF.: C6484 General characteristics: Manufactured by KRAUSS MAFFEI Model HZ 125 Technical characteristics: Basket diameter 1250 mm Max. rotational speed 1220 rpm

Category: 1200 machines and plants for process engineering / Centrifuges
Latest update: 08.01.2024 add to watchlist
approved
dealer
item-No.: 157562958

used

check Seller: COMQUIMA EUROPE
Location: 08108 Sant Fost de Campcentelles Land-es

add to watchlist

USED KRAUSS MAFFEI HZ 63 SI CENTRIFUGE REF#: C6483 General characteristics: Manufactured by KRAUSS MAFFEI Model HZ 63 Yes Caractéristiques techniques : Densité admissible du produit : 1250 kg/m3. Température du produit : 50 ºC Technical characteristics: Basket diameter 630 mm Max. rotational speed 2400 rpm

Category: 109 other metal working machines / Hydraulic Power Units
Latest update: 21.12.2023 add to watchlist
approved
dealer
item-No.: 160532590

used

check Seller: Komplett-Konzept Verwertungs GmbH
Location: Land-de
Price: VB 1.350 € add to watchlist

Krauss-Maffei SPA 12/25 RP Manufacturer: Krauss-Maffei Type: SPA 12/25 RP Type: Hydraulic power pack Complete plant closure, wide range of mezzanine floors, pallet racks, shelving racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines More items - new and used - can be found in our shop! International shipping costs on request!

Category: 301 injection moulding machines
Latest update: 07.06.2024 add to watchlist
item-No.: 162905229
New in: 2005

used

Seller: Exapro
Location: Land-fr
Price: 22.500 € add to watchlist

Fully hydraulic closing system, MC 4 control system with color monitor, integrated control panel and built-in disc drive. 1 complete plasticizing system for thermoplastics with a screw diameter of 45 mm - Levels for the foundation of the Nolato machine - Hydraulic blockade of reverse rotation of the auger - Hydraulic auger drive with standard speed - SVO open nozzle in 2-piece design (nozzle body with screw-in nozzle). - A device for sorting good and defective parts. Pneumatic pendulum. Pendulum speed approx. 3 sec. Free-standing device under the machines discharge shaft. Including electrical standard connector and software (Pos. 42.42). - Single pneumatic valve on the movable mold clamping plate for the blowing function (1 piece of 3/2 separating valve with 1 magnetic coil). Control to choose between road/time or time/time. Possibility to manually set the flow using 1 thrott ...

Category: 301 injection moulding machines / Injection molding machines
Latest update: 09.01.2024 add to watchlist
item-No.: 163114331
New in: 2007

used

Seller: PIMM-used
Location: 52-40 Wroc?aw Land-pl

add to watchlist

Krauss Maffei KM 2000-17200 MX Injection Molding Machine Krauss Maffei robot - LR 500 Year of production - 2007 Hydraulic-mechanical double-plate locking system with 4 pressure cushions and 4 locking units on the movable plate. PV - adjustment of the injection unit. MC 5 - PC - (Pentium) control system with TFT colour monitor, integrated control panel and USB data carrier. Plasticizing system Complete plasticizing system for thermoplastics with HPS-AT screw diameter 150 mm TECHNICAL DATA Clamping unit - mould clamping force: kN 20000 - mould opening force: kN 1400 - Dimensions of the mounting plate (H x V): mm 2650 x 2400 - Clearance between columns (H x V): mm 1870 x 1620 - mould opening stroke: mm 2800 - mould height (min-max.): mm 800 – 1700 - Opening width: mm 3600 - ejector stroke: mm 400 - ejector force: kN 400/200 Injection Unit - screw diameter: mm 150 Cetb ...

Category: 301 injection moulding machines
Latest update: 07.06.2024 add to watchlist
approved
dealer
item-No.: 163790066
New in: 2003

used

check Seller: GINDUMAC GmbH
Location: Land-de

add to watchlist

This used Krauss-Maffei KM 300-1400-390-3-CZ, manufactured in 2003, comes fully equipped with new operation-specific software, updated hydraulic plans, and precision injection units for enhanced performance. Key features include a comprehensive electrical installation, a detailed locking unit, a robust machine bed design, and a state-of-the-art cooling system. Additionally, it includes a hydraulic ejector system and transport lock for safety and reliability. Operating instructions are available in Spanish and German. Seize the opportunity to buy this Krauss-Maffei KM 300-1400-390-3-CZ injection moulding machine for top-notch manufacturing efficiency. Contact us for more information.

Category: 301 injection moulding machines / Injection molding machines
Latest update: 17.04.2024 add to watchlist
approved
dealer
item-No.: 163837385
New in: 2014

used

check Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 1600 kN

Krauss Maffei KM 160-750 CX with the Sepro Industrial Robot SDR 22S robot / hybrid machine / operating hours: approx. 34,000 h in automatic mode Year of construction: 2014 Injection unit: Screw diameter: 45 mm Spray weight: 289 g Injection pressure: 2336 bar Dosing volume: 318 ccm Clamping unit : Clamping force: 160 t Tie bar spacing: 520x520 mm Size of clamping plates: 820x845 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - Touchscreen Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 34,000 h in automatic mode Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Control with hot runners Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter - energy saving Machine with cylinder / battery with compressed nit ...

Category: 301 injection moulding machines / Injection molding machines
Latest update: 17.04.2024 add to watchlist
approved
dealer
item-No.: 163837387
New in: 1998

used

check Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 1100 kN

Krauss Maffei KM 110-700 C2 Year of construction: 1998 Injection unit: Screw diameter: 45 mm Spray weight: 278 g Injection pressure: 2336 bar Dosing volume: 305 cc Clamping unit: Clamping force: 110 t Tie bar spacing: 470x470 mm Size of clamping plates: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC IV Additional equipment: Machine in very good technical condition Euromap 12 Robot Interface Air valve x 1 Hydraulic core pull x 1 Hot runner control x 12 Injection unit hardened - Bimetal Parallel Movements Proportional valve on the injection unit – precise injection Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) The machine was regularly serviced by the authorized service Krauss Maffei in Switzerland Metrics: Weight: 6200 kg Length/Width/Height: 4.66x1.51x2.19 m Drive: Pumps/motor: 18.5 ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
RESALE used machinery 25 years online