二手 HOMAG 出售

制造商： 玻尔格特里贝， 斯图克玻尔盖特里贝 ： 1， 钻孔主轴数量： 13， 网格 32 毫米： 是�

制造商： Homag， 类型： KL 79， 控制： Homatic， 边缘材料最小-最大 mm： 3-20， 工件长度最小-最大 mm： 300， 工件高度最小-最大 mm： 10-60， 涂胶高度最大 mm： 65， 进给最小-最大 m/min： 10-25， 连接铣削： 否， 精细铣削： 是， 脱模剂应用： 否， IR 区域： 否， 带材刀库最小-最大 mm： 3-20， 横切站： 是， 预铣削： 是， 倒角铣削： 是， 拐角复印 类型： 否， 胶合部件 EVA： 是的，预熔胶机 Kg/hr： 是， 研磨电机件： 2， 轮廓研磨顶部底部： 是， 上压带/辊： 皮带， 磨边直： 是�

制造商： Homag， 类型： KAL 310， 建造年份： 2004， 控制： NC 21， 软件： Homag， 边缘材料最小-最大 mm： 0.5-3， 工件长度最小-最大 mm： 150-3000， 工件高度最小-最大 mm： 10-55， 进给最小-最大 m/min： 24， 轴控制： 是， 连接铣削： 是， 精细铣削： 是， 脱模剂应用： 是， IR 区域： 是， 电源灯 IR： 400 瓦， 滚筒刀库： 简单， 带材库最小-最大 mm： 是， 带钢盒最小-最大 mm： 是， 横切站： 是 是的，倒角铣削：是，半径铣削轴调整：lja，转角复� ��类型：FK 11，2电机：2，拉丝刀片半径：是，拉丝刀片与轴调整 ：是，拉丝刀片平整：是，喷涂系统2：是，清洁喷嘴 ：是，粘合部分EVA：是，预熔胶机Kg/hr：是，施瓦布� �元：是，上压带/辊：皮带，脱模剂装置：是，工件� �撑：是 ...

制造商： Homag， 类型： KFL 10/42/QE/S， 建造年份： 2002， 程序： 是， 控制： Homatic NC 21/ES00， 工件宽度最小-最大 mm： 280-600， 工件长度最小-最大 mm： 320-2500， 工件高度最小-最大 mm： 8-60， 封边高度最大 mm： 30-50， 边缘材料最小-最大 mm： 0.3， 进给最小-最大 m/min： 10-40， 成品： 刨板双刃， 软成型： 是， 入口尺控制： 是， 连接铣削： 是， 仿形铣削： 是，脱模剂应用：是，红外区：是，辊筒库：2折，连 接铣削：是，横切工位：是，预铣削：是，倒角铣削� ��是，半径铣削轴调整：是，振荡：是，清洁喷嘴：� �，更换胶合部分：是，胶合部分EVA：是，喷嘴：是， 建造年份：2002

制造商： 霍马格埃尔特克斯图尔卡特， 类型： 哈马格-2/mit ACR 1 奥斯冈， 模型： CPU 30 E16-103 4 MB 25 兆赫 欧恩格拉菲克�

制造商： 埃尔特克·霍马格·卡特， 类型： 卡特·塞科 6 X RS 232， 型号： 施尼茨泰勒卡尔特， 序列号： 4-086-05-038�

制造商： 霍马格 ， 类型： KAL 310/8/A20/S2， 年份： 2005， 控制： PC 22， 工件宽度最小-最大 mm： 最小 55/100， 最小-最大.工件高度（毫米）： 12 - 60， 最小-最大进给量 米/分钟： 18 - 24， Einlauflineal gesteuert： 是， 预铣削： 2 x 3kW， 分离剂的应用： 是， 线圈刀库： 2， 斜切工位： 法斯/杰拉德， 预铣削： 2 x 1，5 kW， 坡口铣削： FK 13 - 8Fach， 半径铣削： 4 kW， 拐角跟踪类型： MN 21， 平板刮刀： FA 11， 粘接部件 EVA： A 20，顶压皮带/滚筒：带，工件重新进料：沃林斯塔利� ��，自由文本：弗里普拉茨，年份：2005

制造商： 豪迈埃尔泰克 ， 型号： 转换式 CPU30/16 auf 4 X RS， 序列号： 4-086-05-0241�

制造商： 霍马格 运输机长 mit angetriebenen Anschlagriemen， 年份： 约 2005， 控制： 是， 工作长度 mm： 3500， 工作强度 mm： 2050， 发动机功率 kW： 1，5， 进料速度最小-最大 m/min： 10-40， 杜尔希梅塞尔罗尔 mm： 50， 罗伦米塔台： 70， 安格特里本 über Zahnriemen： 弗拉赫里门， 安施拉格利姆前窗： 运输工， 安施拉格坎特 霍弗斯特尔巴： 是的， 施拉格斯特隆德罗伦 （Durchgehend）： 10-40， 杜尔希塞特罗尔 mm： 50， 罗尔米， 自己的控制器： 是， 总高度mm： 980 +-， 进料速度连续可调： 是， 工作高可调 mm： 是， 年份 ：约2005�

制造商： 霍马格， 类型： 软盘劳弗维克和节日， 年份： 1996， FREITEXT1： 澳大利亚机械制造 KF 20， 年份 ：1996

制造商： 霍马格软盘和节日普拉特， 类型： 3，5 HD 52 MB， 序列号： 2-083-03-0019�

制造商： 霍马格双主轴铣床 4 轴机床， 类型： BMG 512， 控制： Woodwoop 6.0， 工件长度最小-最大 mm： 4500， 工件高度最小-最大 mm： 1600， 铝加工： 300， 连续钻孔机： 是， 进给最大米/分钟： 是， C 轴： 2， B 轴： HSK 63， 摆锤加工： 约 12， 工件宽度最小-最大 mm： 1800-24000， 工件长度最小-最大 mm： 约 12， 水平： 1， 垂直铣削主轴数： 14， RPM 1： 9， 铣削主轴 2 kW： 6， rpm 2）： 2， 换刀装置数量： 2， 链式更换器： 是， 换料器： 是， 工作宽度最大 mm： 6， 钻头水平 X： 是， 皮带输送： 是， 工作台数量： 是， 桁架工作台： 120， 铝光滑： 自动， 滚子台： 16， 2 座分配： 是， 在后面的工作台停止： 是， 钻垂直： 是， 胶合高度 mm： 是， 杂志件： 否， 接口 DXF： 墨� ...

制造商： Homag， 类型： KL 10/18/QA， 建造年份： 2000， 程序： Homatic， 控制： NC 21， 工件高度最小-最大毫米： 85 - 1200， 胶水高度最大 mm： 240， 进给最小-最大米/分钟： 8 - 60， 轴控制： 0.3 - 3.0 ， 入口尺控制： 10 - 40， 脱模剂应用： 0.4 - 12， 电源灯 IR： 是， 带材刀库最小-最大 mm： 是， 横切站： 是， 预铣削： 颗粒状， 带材刀库： 是， 杂志：是，凹槽旋转控制：FK 13，凹槽：UF 11，拉丝刀片半径：是，拉刀片类型：8，带轴调整的� ��刀片：是，拉刀片扁平：2，拉刀片2类型：是，角剪 ：2 X倒角，4电机：是，转角复印摆动：是，伺服复印：� �，滚子链：胶带，备用胶合部分：皮带，胶合部分EVA ：6，喷嘴：11，000，预熔炉Kg/hr：是的，建造年份：20 00

制造商： 霍马格， 类型： 施瓦贝拉格列盖特， 年份： 1996， Ersatzteil aus Maschine： 霍马格 KF， 菲尔斯奇纳森石 链接： 是， für Maschinenseite rechts： 是， 波利拉格列： 是， 奥西里伦 ： 是， 摩托南采尔： 2， 布尔斯滕达赫舍尔毫米： 150， 比尔斯滕布雷特毫米： 30， 千瓦输出： 0，25， 伏特/Hz： 30/50， 德雷赫兹伦U/min： 2850， 普纽马蒂斯安斯特巴尔： 是的， 布尔斯滕杜尔切舍尔 mm： 150， 比尔斯坦布雷特毫米： 30， Kw 输出： 0，25， 伏特/Hz： 30/50， 德雷扎伦 U/min： 2850， 肺气肿： 是的， 年份 ：1996

Description: vertical cut max 2500 mm maximum cutting length 3660 mm saw velocity Disco 300 mm 5,5 Kw 2855 rpm incisor velocity Disco 120 mm 0,55 Kw 2820rpm postforming saw group Disco 300 mm 0,75 kw, 2803 rpm motor power 6,25 Kw The machine is equipped with a 3rd motor that cuts and prevents 'tearing' of the material voltage 380 dimension 4800x1700x2670 mm weight 1900 Kg cutting length: 4,200 mm, cutting height: 2,500 mm, Approx. Onsite Dimension. (l x w x h): 4,800 x 1,700 x 2,670 mm, weight approx.: 1,900 kg

Description: serial number edgebander: 0-200-96-0454 supply 400 Y/230 V, 3 phases, 50 Hz maximum operating full load current 40 A fuse 50 A control voltage 24 V serial number return system: 0-284-96-1370 , supply 400 Y/230 V, 3 phases, 50 Hz maximum operating full load current 3,3 A fuse 16 A control voltage 24 V ATTENTION: Part marked in red NOT included Please also have a look at the pdf files of this machine  , serial number: 0-200-96-0454, Approx. Onsite Dimension. (l x w x h): 8,365 x 2,000 x 1,820 mm, weight approx.: 5,000 kg

Description: The machine will not be available until around May 2024. Basic machine Continuous machine stand for setting up the processing unit Workpiece support with roller rail, extendable approx. 800 mm Glue roller drive for feed stop Glue container lift for feed stop Workpiece-operated glue container clamping Adjustable infeed guide Pneumatically controlled infeed stop Workpiece transport device Transport chain 80 mm wide Precision running and guide surfaces hardened Transport chain magnetically braked Top pressure driven by composite V-belt Manual height adjustment Digital position indicator Technical data Operating voltage: 400 Volt, 50/60 Hz Feed rate: 18 - 25 m/min Feed rate with FK11 profile cutter: max. 20 m/min Working height: 950 mm Working width for workpiece thickness 22 mm: min. 60 mm Working width for workpiece thickness 40 mm: min. 105 mm  ...

Description: Total connected load 12 kW Workpiece length 200 - 2500 mm Workpiece width 70 - 850 mm Workpiece thickness 10 - 60 mm serial number: 0-250-05-4772, total electrical load: 12 kW, software: WoodWob5, Approx. Onsite Dimension. (l x w x h): 2,950 x 1,540 x 1,895 mm, weight approx.: 1,450 kg

Description: With Homag workpiece feeder TBL 100/25/12/F and Ligmatech workpiece return unit ZHR 30L/155/F  , edge thickness: 3 mm, workpiece thickness: 12 -60 mm, feed: 18 m/min, gluing unit: Ja, snipping unit: Ja, rough trimming unit: Ja, fine trimming unit: Ja, profile trimming unit: Ja, universal milling unit: Ja, edge sanding unit: Ja, flat scraping unit: Ja, profile scraping unit: Ja, edge buffing unit: Ja, control: powerControl NC 21, return system: Ja, total power approx: 40 kW, Approx. Onsite Dimension. (l x w x h): 10,000 x 6,000 x 1,700 mm, weight approx.: 4,000 kg

Description: Type of edging Thin edge Thick edge Solid wood Gluing System PUR Premilling Unit yes Corner Rounding Unit yes Grooving Unit yes Max feed speed 24 m/min Maximum panel thickness 60 mm Operating Units 9 nr Min. panel height 12 mm Max. panel height 60 mm Min. edge thickness 0.4 mm Max. edge thickness 20 mm Max. forward feed speed 24 m/min Top pressure yes Pressure with rubber belt Panel support guides yes No. Panel Sizing / Milling units 1 NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit automatic timed intervention : yes Gluing system yes glue pot for PUR glue yes premelter for PUR glue yes premelter for PUR glue NORDSON Roller set to press the edge yes with positioning by NC yes No. Edge Processing Units 7 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 NO. EDGE PROCESSING UNITS 2 Processing Unit : top a ...

Description: Type of edging Thin edge Thick edge Gluing System PUR Combination Squaring Edgebanding Machine First Pass Max Panel Width 3000 mm Max feed speed 40 m/min Operating Units Right Side 10 nr Operating Units Left Side 10 nr Min. panel height 8 mm Max. panel height 60 mm Min. panel width 240 mm Max. panel width 3000 mm Min. edge thickness 0.4 mm Max. edge thickness 3.5 mm Max. forward feed speed 40 m/min Top pressure yes Pressure with rubber belt Panel support guides yes No. Panel Sizing / Milling units Left Side 1 NO. PANEL SIZING / MILLING UNITS LEFT SIDE 1 Unit : double chipper, top and bottom Constructor model : KD 11 motor power : 4.5 KW r.p.m. : 6000 RPM Same technical characteristics on the left side yes Edge coil magazine yes no. positions 12 Gluing system yes glue pot for PUR glue yes premelter for PUR glue yes Roller set to press the edge yes No. Edge Processing Units 8  ...

Description: Min. edge thickness 0.3 mm Max. edge thickness 3 mm , Max. forward feed speed 25 m/min Pressure with rubber belt Panel support guides , with positioning by NC , Infeed panel alignment system , NO. PANEL SIZING / MILLING UNITS , Unit : pre-milling unit automatic timed intervention motor power : 3 KW r.p.m. : 9000 RPM Lamps to preheat the side of the panel , Edge coil magazine , glue pot for EVA hot melt glue premelter for EVA hot melt glue , Roller set to press the edge no. pressure roller 7 with positioning by NC , No. Edge Processing Units 7 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.8 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming no. motors : 2 motor power : 1.5 KW r.p.m. : 12000 RPM , NO. EDGE PROCESSING UNITS 3 Processing Unit : Corne ...

Description: Technical data: tape thickness: 0.3 - 3 mm material thickness: 8 - 60 mm conveyor speed: 18 - 25 m / min The edgebander consists of the following aggregates: • 2 pre-milling machines for material processing (3 kW each) • material heating lamp • glue heating vessel • container with roller for applying glue to the material • push rollers • 2 stripping units (each 0.8kw) • 2 units with radial cutters for processing the upper and lower edges (1.5 kw each) • 2 postforming aggregates • 2 cyclings • polishing brushes with liquid injectors The edging is fully automated, which means that the height of the beam, pre-milling machines, rollers and all the settings of the cutter depending on the thickness of the material and the strip are adjusted on the main monitor. serial number: 0-200-19-0792, edge thickness: 0.3 - 3 mm, workpiece thickness: 8 -  ...

Description: HOMAG OPTIMAT Edge Bander (incomplete) Approx. Onsite Dimension. (l x w x h): 10,230 x 1,150 x 2,080 mm, weight approx.: 3,500 kg

Description: HOMAG OPTIMAT KAL 310 / 7 / A20 / S2 Edge Bander with return sistem control - yes edge buffing unit - yes edge magazine with - yes edge sanding unit - no edge thickness - yes feed - 18-20 mts/min fine trimming unit - yes flat scraping unit - yes gluing unit - yes joint trimming unit - yes , profile scraping unit - yes profile trimming unit - yes return system - yes , workpiece overhang - 30 mm workpiece pre heater - yes workpiece thickness - 10-60 mm dimension (l x w x h) and weight approx. (6 packs) 8800 x 1000 x 1900 mm - 5000 Kg 3500 x 1300 ,x 900 mm - 300 Kg 2900 x 1800 x 900 mm - 600 Kg 6400 x 1300 x 900 mm - 1000 Kg 2000 x 1300 x 900 mm - 200 Kg 800 x 500 x 1000 mm - 100 Kg workpiece thickness: 10 - 60 mm, workpiece overhang: 30 mm, feed: 18 - 20 m/min, joint trimming unit: Yes, workpiece pre heater: Yes, gluing unit: Yes, fine trimming u ...

Description: HOMAG OPTIMAT KAL 310 Edge Bander (incomplete) Approx. Onsite Dimension. (l x w x h): 8,060 x 1,010 x 1,870 mm, weight approx.: 3,500 kg

Description: HOMAG KL 76/A20 Edge Bander (incomplete) Approx. Onsite Dimension. (l x w x h): 8,400 x 1,060 x 2,100 mm, weight approx.: 4,500 kg

Description: HOMAG KAL 310 Edge Bander control - yes Joint milling unit - yes edge magazine with - yes End trimming unit - yes edge thickness - yes feed 18 - 20mts / min fine trimming unit - yes flat scraping unit - yes profile trimming unit - yes Buffing unit - yes universal milling unit - no workpiece overhang - 30 mm workpiece pre heater - yes workpiece thickness 10 - 60 mm workpiece thickness: 10 - 60 mm, workpiece overhang: 30 mm, feed: 18 - 20 m/min, workpiece pre heater: Yes, fine trimming unit: Yes, profile trimming unit: Yes, universal milling unit: No, flat scraping unit: Yes, control: Yes, Approx. Onsite Dimension. (l x w x h): 3,830 x 2,390 x 1,980 mm, weight approx.: 1,500 kg

Description: ATTENTION: Location 35614 Aßlar, Germany Well-maintained HOMAG Optimat BAZ 311/52/K CNC machining center with HOMAG Optimat TBA 330/20/16 vacuum feeder, main spindle with Flex5 interface and web edge press unit. ,The main spindle was replaced at the beginning of March 2024 and the costs were EUR 19,000! HOMAG Optimat BAZ 311/52/K, machine no. 0-201-21-4391 HOMAG Optimat TBA 330/20/16, machine no. 0-205-21-4383 Workpiece length: - Single occupancy with tool diameter. 25mm max. 5200mm - Pendulum assignment with tool diameter. 25 mm max. 2150 mm with pendulum occupancy Workpiece width front stop: - max. 1525 mm with tool diameter 25mm - max. 1525 mm with web edge pressing unit - max. 1450 mm for all units Workpiece width stop at the back: - max. 1730 mm with tool diameter 25mm - max. 1650 mm with web edge press unit - max. 1600 mm for all units Main spindle:  ...

Description: - Workpiece length  , All units max. approx. 5200 mm  , Milling cutter 25 mm max. approx. 5375 mm - Workpiece width  , Rear stop for all units max. approx. 1400 mm  , Rear stop cutter 25 mm max. approx. 1550 mm  , Front stop for all units max. approx. 1150 mm  , Front stop milling cutter 25 mm max. approx. 1220 mm - Main spindle 18.5 KW with C-axis  , Speed 0 - 24000 rpm - 72-speed chain changer - Milling spindle 6 KW - LED console position indicator - Chip conveyor belt and articulated belt conveyor (Further tools and units for the tool changer are not included within delivery. Availability depends on the delivery of the new machine. A transport rack from HOMAG is required for transportation of the dismantled machine. This results in costs of EUR 6,500,-- (plus tax). After the transport rack has been returned to Helmut Meier (Germany Burgthann), ...

Description: Floor size: 6600 x 1290 mm . No. 12-position tool changer. Main spindle with No. 9-tool drilling head. With auxiliary edging head equipped with No. 3 edge slots magazine of adjustable size, size range from: 10mm to 600mm by interchanging the slots. Present two SIEMENS vacuum pumps with NASH ELMO fans.  , Y-axis travel: 1750mm Z-axis travel: 250 mm X-axis travel: 6000 mm  , Control: OMATIC  , Approx. Onsite Dimension. (l x w x h): 8,000 x 4,000 x 2,450 mm, weight approx.: 5,000 kg

Description: - Inlet ruler with automatic adjustment and extension 500 mm - BONDING PART A20 BASIC - Pressure zone C with automatic adjustment - Release agent spray unit - Pre- and profile milling unit with pneumatic adjustment - Edge sanding unit KS10 - Profile sanding unit top/bottom PS41 / PS42 edge magazine with: 2 -fold roller, serial number: 0-200-21-6055, edge thickness: 0,3 - 3 (20) mm, workpiece thickness: 8 - 60 mm, workpiece overhang: 30 mm, feed: 18 - 25 m/min, joint trimming unit: 2 x 3 KW, gluing unit: A20/QA34/C, snipping unit: HL84 (2 x 0,8 KW), rough trimming unit: 2 x 1,5 KW, fine trimming unit: 2 x 0,4 KW, profile trimming unit: FF12 (4 x 0,4 KW), edge sanding unit: KS10 / PS41 / PS42, flat scraping unit: ja / yes, profile scraping unit: MN21 automatic, edge buffing unit: ja / yes, control: Power Control PC 22, return system: Nein / No, Approx. Onsite Dimension. (l x w ...

Edge closure for edge banders, edge banding machines -Manufacturer: Homag -for: 2x different edges -Number: 1x edge closure available -Price: per piece -Dimensions: 670/360/H350 mm -Weight: 43 kg/piece

Control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5406/07 -Type: 2083015406/07 -Number: 1x control cards available -Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.31 kg

Finishing unit, buffing unit, modular unit kit, format processing unit, double-end profiler, edge processing machine, after the scraper for edge processing machine -without: drive motors -HOMAG finishing unit: for cleaning agent application with buffing device for disposal of glue residue on PVC edges -with: oscillation -Swiveling -Number: 3x units available -Price: per piece -Dimensions: 400/160/H225 mm -Weight: 5.7 kg

Control card, input card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5102/5103 -Type: 2083015102/5103 -Number: 1x control cards available -Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.275 kg

Control card, input card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 83.51 -Type: 83 51 -Number: 1x control cards available -Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.275 kg

PC-CPU, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: PC-CPU-2-083-01-5003 -Type: PC-CPU 2083015003 -Number: 1x control cards available -Price: per piece -Dimensions: 20/195/H265 mm -Weight: 0.31 kg

Control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5905 -Type: 2083015905 -Number: 1x control cards available -Price: per piece -Dimensions: 130/365/H30 mm -Weight: 0.58 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying: from 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 0.3 kW -Voltage: volts -Frequency: Hz -Speed: 18000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 520/470/H600 mm -Weight: 64 kg

Linear drive, linear gear, screw jack, spindle drive -comes from a Homag edge banding machine -difficult execution -Adjustment path: 100 mm -Number: 2 pieces available -Price: complete for 2 pieces -Dimensions: 250/230/H800 mm/piece -Weight: 66 kg/piece

Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 498 mm -Length of the clamping surface: 2525 mm -Height of table surface: 268 mm -Working height: 268 mm -Transport dimensions: 2525/500/H268 mm -Weight: 570 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for format processing -with heavy dovetail guide -1x motor Perske -with long shaft -Motor type: KNS 70.12/2 D1 -Power: 3.0/4.4 kW -Voltage: 220/380 volts -Frequency: 50/100 Hz -Speed: 2870/5880 rpm -1x motor Perske -with long shaft -Motor type: KNS 70.14/4D1 -Power: 3.7/6.0 kW -Voltage: 220/380 volts -Frequency: 50/100 Hz -Speed: 2850/5860 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1100/1300/H1400 mm -Weight: 550 kg

Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 494 mm -Length of the clamping surface: 2925 mm -Height of table surface: 447 mm -Working height: 447 mm -Transport dimensions: 2925/494/H447 mm -Weight: 564 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for format processing -with heavy dovetail guide -1x engines Perske -Motor type: KNS 70.12/2.DF1 KNS 51.15.20 -Power: 3/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -2x engines Perske -Motor type: KNS 51.15/2D -Power: 1.1/2.2 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2640/5600 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1150/1100/H1200 mm -Weight: 625 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for joint milling -with heavy dovetail guide -Milling unit: swiveling -1x engines Perske -Motor type: KNS 70.12/2.01 -Power: 3/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1100/600/H1200 mm -Weight: 300 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for format processing -with heavy dovetail guide -1x engines Perske -with long shaft -Motor type: KNS 70.12-2DF -Power: 5.5/8.0 kW -Voltage: 220/380 volts -Frequency: 50/100 Hz Speed: 2870/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1250/1350/H600 mm -Weight: 400 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for format processing -with heavy dovetail guide -1x engines Perske -Motor type: KNS 70.12/2.DF1 -Power: 3/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -2x engines Perske -Motor type: KNS 51.15/2D -Power: 1.1/2.2 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2640/5600 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1200/1000/H1200 mm -Weight: 600 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for joint milling -with heavy dovetail guide -Milling unit: swiveling -1x engines Perske -Motor type: KNS 70.12/2.01 -Power: 3/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1150/600/H1250 mm -Weight: 280 kg