描述: |
四面刨床 HOMAG Mouldteq M-300 Fenster
二手机
Number of spindles: 6 St. Working width: 250 mm Working
height: 160 mm Length of the planing table: 2500 mm Feed
motor: 4 kW Feed speed: 6 bis 24 m/min. Dimensions (L/W/H):
4800x1900x2150 mm weight of the machine ca.: 5400 kg Control:
powerControl HOMAG Moldteq M-300 (OPTIMAT
LPP-306) -------------------------------------- Four-sided
planer in window version with electronic axial and radial
adjustment of the
spindles.
Advantages: -----------------------------------
--- - Flexibility thanks to variable feed and adjustable spindle
speed - Intuitive machine operation via powerTouch2 - Quick
setup using proLock spindle clamping - High precision thanks to
solid cast iron stand - Ideal power transmission as each spindle
has its own motor is driven
Technical data short
version -------------------------------------- Number of
spindles: 6 Working width: 250 mm Working height: 160
mm Dressing table length: 2500 mm Spindle speed: continuously
adjustable 4,000 - 8,000 rpm Feed speed: up to 24 m/min WINDOW
PACKAGE Machine without processing tools
Detailed
description from the manufacturer Complete description see
attached PDF): -------------------------------------- Planing
and profiling machine with 6 work spindles.
Working width
min. 10 mm Working width max. 250 mm
Working height min.
10 mm Working height max. 160
mm
STEERING: -------------------------------------- p
owerControl with powerTouch MOLDTEQ M-300 Modern control system
based on Windows PC
Feed table 2,500 mm Automatic
lubricant pump Lubrication impulses are generated in powerTouch
using the Running meters set.
Width-controlled guide
ruler LPP306 The ruler is with the left spindle coupled, the
adjustment is pneumatic supported and after reaching the
target Position pneumatically clamped. Ruler does not need to
be adjusted separately by
hand
FEED: -------------------------------------- Fee
d speed min. 6 m/min, max. 24 m/min Feed motor power 4
kW
Positioning the feed carrier Positioning is done via
powerTouch.
SPINDLES IN
GENERAL: -------------------------------------- Tool clamping
system ProLock quick-clamping system on all tool spindles Fast
and convenient tool change
Quadruple spindle bearings Two
pairs of ground bearings in each area the pulley and the spindle
flange Long service life and consistent concentricity
precision
FIRST LOWER
SPINDLE: -------------------------------------- Spindle motor
power 7.5 kW Siemens IE3 energy saving motor Power: 7.5
kW Speed range: 6,000 rpm Spindle diameter 40 mm Spindle
length 281 mm The system cannot be operated without a joint
milling cutter (tool).
FIRST RIGHT
SPINDLE: -------------------------------------- Spindle motor
power 7.5 kW, adjustable Siemens IE3 energy saving
motor Spindle speed infinitely adjustable Power 7.5
kW Speed range 4,000 rpm to 8,000 rpm Spindle diameter 40
mm Spindle length 176 mm
Motorized positioning
radially Motorized axial positioning
FIRST LEFT
SPINDLE: -------------------------------------- Spindle motor
power 7.5 kW, adjustable Siemens IE3 energy saving
motor Spindle speed infinitely adjustable Power 7.5
kW Speed range 4,000 rpm to 8,000 rpm Spindle diameter 40
mm Spindle length 176 mm
Motorized positioning
radially Motorized axial positioning
FIRST UPPER
SPINDLE: -------------------------------------- Spindle speed
infinitely adjustable Power 7.5 kW Speed range 4,000 rpm to
G512123 8,000 rpm Spindle diameter 40 mm Spindle length 266
mm
Motorized positioning radially Motorized axial
positioning
SECOND UPPER
SPINDLE: -------------------------------------- Spindle speed
infinitely adjustable Power 7.5 kW Speed range 4,000 rpm to
8,000 rpm Spindle diameter 40 mm Spindle length 266
mm
Motorized positioning radially Motorized axial
positioning
Glazing bead removal When the function is
selected, the pressure shoe cycles (in the direction of travel) to
the left and brings at the same time the riving knife and the
kickback protection in position - Can also be done with a
glazing bead saw attached Workpieces up to a minimum height of
10 mm are produced become - No manual adjustment
required - There is only one way to cut out the glazing
bead an axial position of the glazing bead
saw
SECOND LOWER
SPINDLE: -------------------------------------- Spindle speed
infinitely adjustable Power 7.5 kW Speed range 4,000 rpm to
8,000 rpm Spindle diameter 40 mm Spindle length 266
mm
Electronic double display radial TARGET values are
specified by powerTouch, ACTUAL values are set manually using a
hand crank.
Motorized axial
positioning
Technical information according to the
manufacturer - without guarantee! Pictures not original as not yet
available, show identical model
The data for
this ad was created with ModulMWS - the software solution of LogoTech
oHG.
seller offer No. resale 1305-2727
|