| 描述: |
Single-sided edge banding machine KAL 210 wi HOMAG KAL 210 AMBITION 2264
二手机
Single-sided edge banding machine
Make: HOMAG
Type: KAL 210 AMBITION 2264
Year of construction: 2014
One-sided edge banding machine for editing
of straight workpiece edges and for gluing
and post-processing in the longitudinal and transverse pass.
Overview of aggregate equipment:
- Separating agent spray unit
- Joining milling unit
- Gluing unit A20 with 2 rolls
- end trimming unit HL84
- Pre-milling unit BF10
- Form milling unit FK11 manual
- Profile scraper PN10
- Finishing unit
Feed 18 - 25 m/min.
Feed max. with FK11 20 m/min.
Working height 950 mm
Pneumatic connection 6 bar
Total length 7845mm
Workpiece thickness 8 - 60 mm
Edge height max. = workpiece thickness + 4 mm
Edge material roll 0.3 - 3 mm
Edge material strips 0.4 - 20 mm
Aggregate equipment:
- Separating agent spray unit top/bottom
- Joining milling unit
2 motors each 3 kW, 150 Hz, 9000 rpm.
- Gluing unit A20 with 2 rollers
consisting of:
- Workpiece preheating
- hot-melt adhesive unit
Melting unit with Basic granulate container
Melting capacity 6 - 12 kg/h, depending on the
adhesive used
Order unit QA65
- Magazine 2 rolls manual
- Pressure Zone C
1 driven feed roller diam. 150mm
6 squeezing rollers diam. 70mm
Pneumatic pressure adjustment
Central adjustment to different edge thicknesses
- end trimming unit HL84 bevel/straight 0.8 kW
for trimming the excess edges on the front and
trailing edge
2 motors each 0.8 kW, 200 Hz, 12000 rpm.
Pneumatic adjustment for converting from chamfer to
straight caps
- Pre-milling unit BF10 1.5 kW
for pre-milling the PVC and flush-milling the solid edges
2 motors one above the other, each with 1.5 kW, 200 Hz, 12000
rpm.
- Form milling unit FK11 manual
for processing the edge overhangs on the workpiece
upper and lower edge as well as for milling around the
Workpiece front and rear edge
- Profile scraper PN10
for chamfering or rounding of pre-milled PVC edges
- Finishing unit
consisting of:
- Glue joint scraper
- Buffing unit
- powerControl PC22
Modern control system based on Windows PC
- Automatic adjustment of the infeed guide on one side
- W614335 Sliding carriage
- Workpiece thickness 60 mm
- Workpiece thickness 8 mm
- Pre-installation for Boomerang ZHR05
Feed lock and mechanical cutting
job adjustment
- Application unit PU65 (exchangeable)
- Ambition2264/74 bevel/radius automation package
- automatic pressure zone adjustment
- Pneumatic adjustment of the trimming motors
Flush or overhang caps
- Pneumatic adjustment pre-milling unit to
Flush or overhang milling
- Automatic adjustment from chamfer to
Radius milling in form milling
- Pneumatic adjustment FA11 for driving away
from the work area
- Remote control for setup mode
- HOMAG Group POWERTOUCH control system
with workpiece returning system
Make: LIGMATECH
Type: ZHR05/L/075
Year of construction: 2014
Note:
The technical data and descriptions are a copy of the order
confirmation at that time. Data are for information and are not
binding.
seller offer No. resale 0031117
|