齿轮切削设备和滚齿机 二手 出售

max. wheel diameter: 2400 mmgear width: 600 mmmax. module: 30 Control: Sinumerik 840 D workpiece external diameter max.: 3400 rim strength max.: 500 radial slide travel: 1050 mmaxial slide travel: 1600 mmswivelling range milling head: +- 15 °table diameter: 1870 mmtable hole: diameter: 600 mmdepth: 875 mmtable load capacity - central/maximum: 30000 kgworkpiece: tip circle diameter: 440 mmroot circle dia. min.: 310 mmcutter width - max.: 120 mmtotal power requirement: 100 kWweight of the machine ca.: 37,5 tdimensions of the machine ca.: 12,3 x 5,6 x 4,4 mmachine can be used only for internal gears - dry cutting typeEquipment/accessories:- column increased- internal head IKF2- big clamping table- documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

砂轮直径 - 最大： 1600 mm车轮宽度： 457 mm模块 - 最大： 12.5 模块 - 最小： 2 主轴孔径： 222 mm行程： 15-120 冲程/分钟滚动进给： 0.3 - 0.84 mm/min进给深度： mm/冲程电气器.版本 - 电压/频率：380 / 50 V/ Hz总功率要求：10 kW机器重量约：20 t空间要求约：3.5 x 3.3 x 2.5 m外部齿轮直径：- 最大 63 1600 mm 最小 0 0 0前表面宽度，双螺杆形 0 - 18 0 - 457 mm前宽，直或单螺杆形 0 - 10 0 - 254 mm 内部齿轮：毛坯直径：- 最大 66 1676 mm面宽 0 - 8 0 - 203 mm 邮编：- 最大 66- （2 x 轮辋厚度）此列表的数据是使用 ModulMWS 创建的 - 徽标科技 oHG 的机器管理�

thread dia.: 250 mmgrinding length: 500 mmthread pitch: - mmtread diameter: 2 mmclamping length - spindle head right: 900 mmspindle bore: 66 mmclamping length - spindle head left: 1020 mmworkpiece weight: 200 kgpitch: 0,8 - 288 mmpitch angle: +/- 40 °workpiece turning speeds: 0,4 - 50 U/mingrinding wheel width: 8/13/16/20/30 mmtable feed: 1500 mm/mingrinding spindle speed: 1900-2450 U/minno. of feed: 12 max. thread profile: 12,5 Modulnumber of starts: 1 - 8 dia. of hole: 160 mmgrinding wheel diam. min/max.: 275 / 350 mmgrinding motor: 16 kWelectrics - voltage/frequency: 3 x 380 / 50 V/Hztotal power requirement: ca. 20 / 45 kW / KVAweight of the machine ca.: 4,6 tdimensions of the machine ca.: 5,7 x 4,7 x 2,6 mprofiling device CNC: CNC controlled Thread & Worm Grinding Machine equipped with:- CNC control Grossenbacher AG / Reishauer modell FMS 6- CNC profiling device IBH with hand contr ...

max. wheel diameter: 400 mmgear width: 200 mmmax. module: 10 min. module: 1 profile depth: 25 mmx-axis: 630 mmy-axis: 400 mmz-axis: 190 mmU-axis: 80 mma- axis: 360 °b-axis: +/- 30 °max.helical angle: 30 °grinding wheel diameter: 250 - 350 mmspindle speeds (infinitely variable): 1500 - 2800 U/mingrinding slide feeds: 6000 mm/mincenter distance betw. workpiece-tool min/max.: pitch max.: 9000 mmpitch min.: 10 mmelectrics - voltage/frequency: 380 / 50 V/Hztotal power requirement: 38 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: 4,2 x 2,6 x 2,8 mhorizontal Profil Gear Grinding Machine for Spur and Helical External Gears.Machine can be used with Abrasive Electrocorundum Wheels or with CBN or Elbor Wheels. Equipped with:- CNC Control FANUC 0i-MF-- for 6 Controlled Axis (4 simultaneously)- Gear Measuring System- Chip and Sludge Removal System- Paper Band Filter and magneti ...

max. wheel diameter: 1600 mmgear width: 250 mmmax. module: 20 min. module: 1,5 base circle dia. - max.: 1450 mmbase circle dia. - min.: 150 mmspecimen weight from/to: 4000 kgfeeler adjustment movement - parallel: 1400 mmmax.helical angle: 0 - 90 °wheel diameter with counterstay: 1000 mmfeeler adjustment movement - parallel: 800 mmcentre height: 1150 mmelectrics - voltage/frequency: 400 / 50 V/Hzdimensions of the machine ca.: 2,8 x 2,4 x 2,3 mtotal power requirement: 2 kWweight of the machine ca.: 3 tUniversal Involute and Helix Testing Machine - modernized 1995Machine is suitable for measuring all individual tooth data on straight and helical spur gears, and shaping andshaving cutters. Following tooth data can be t ...

max. wheel diameter: 3000 mmgear width: 1200 mmmax. module: 30/40 min. module: 2 table diameter: 2500 mmtable load capacity: 400 kNhob dia. - max.: 450 x 500 mmmilling spindle speeds: 10 - 165 U/minhob length max.: 500 mmtip circle diameter: 2050 mmtooth helical angle min/max: 0 - 45 °center distance betw. workpiece-tool min/max.: 150 - 1750 mmmilling slide swivelling: 50 Graddistance table / counter stay: 1050 - 2050 mmshifting: 300 mmworkpiece weight: 40 ttable bore diameter: 800 mmdepth of hole: 1100 mmmain drive motor: 37 kWmin. workpiece diameter: 290 mmmin. number of teeth: Wälzfräsen 20 min. number of teeth: Formfräsen 2 taper: MK 100 feeds axial: 1 - 1800 mm/minradial feed: 1 - 500 mm/minfeed: Tangential 1 - 450 mm/minrapid traverse: 1875 / 530 / 470 mm/minelectrics - voltage/frequency: 380 / 50 V/Hzcontrol: Siemens Sinumerik 3M total power requirement: 125 kVAweight of the m ...

max. wheel diameter: 3000 mmgear width: 500 mmmax. module: 25 / 40 spindle turning speed range: 250 U/minfeed speeds: max. 4000 mm/minfaceplate diameter: 2000 mmtable bore diameter: 700 mmtable turning speeds: 51 U/minpower capacity - milling spindle: 53 kWdrive motor for milling spindle: - kWaxial adjustment: 1200 mmmilling head swivable ca.: +/- 45 °control: Siemens 840D total power requirement: - kWweight of the machine ca.: 55 tdimensions of the machine ca.: - m- CNC Control Siemens 840D- Internal Hob Head IFK- External Hob HeadThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

槽宽度：125 mm拉丝长度：1250 mm拉力 - 最大：5 吨行程长度 最大：925 mm工作台夹紧面：550 x 700 mm工件重量：6000 kg切割速度：1 - 12 m/min返回速度：2 - 24 m/min进给：0.219 mm/DH总功率要求：约 5 kW机器重量 约：4 t空间要求：1.5 x 1.5 x 3 m配备：- 自动快速调整进给。重新调整- 带泵的油箱- 3个工具柜- 槽长工具：最大150 / 300 / 500 / 1000 / 1250mm- 拉丝刀 - 各种配件数据fü，此广告是用ModulMWS创建的 - LogoTech oHG的机器管理�

工作台长度： - mm工作台宽度： - mm砂轮直径： 400 mm砂轮宽度 最大： 50 mm总功率要求： 1.5 kW机器重量 约： 0.3 t空间要求 约： 1 x 1 x 1 m砂轮预矫直装置，用于预矫直机床外部的砂轮，特别 适用于双面磨削的仿形砂轮，最高可达模块 12 - 适用于所有 NILES 型号该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理�

max. wheel diameter: 650 mmgear width: 200 mmmax. module: 10 min. module: 1 work accuracy: DIN 6 clamping table diameter: 710 mmtable bore diameter: 150 mmnumber of strokes - stepless: 35,5 - 560 c/minmax. ram stroke: 230 mmfeeds: 3,55 - 40 mm/minradial feed: 0,8 - 9 mm/minwork-spindle diameter: 110 mmtotal power requirement: 28,2 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 3,8 x 2,3 x 2,5 mGear shaping machine for the production of spur gears, forInternal and external gears - Built under licence from LORENZ and identical in construction to LORENZ LS 630complete Modernisation + overhaul in 2012 with:- new painting- new electrical system from Telemecanique- Counter Holder- Chip conveyor- Coolant unit- change gearsNot used in production again after overhaulThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 80 mmgear width: 120 mmmax. module: 3 min. module: 1 control: SIEMENS 840 C total power requirement: 30 kWweight of the machine ca.: 7500 tdimensions of the machine ca.: mL I E B H E R RCNC – Controlled Gear Hobbing MachineType LC 82Baujahr 1995 Ser.-Nr. 0836______________________________________________________Gear-Diam. max. 80 mmModule Range 1 - 3 Helix Angle +/- 45 °Distance Table Center to Tool Center 15 – 160 mmHobbing Head Slide stroke vertical 250 mmTangential Travel / Shift Travel of Tool slide 180 mmMinimum Number of Teeth 3 (!)Hob Size max. Ø x length approx.  ...

max. wheel diameter: 900 mmgear width: 500 mmmax. module: 1 min. module: 10 total power requirement: 16 kWweight of the machine ca.: 8.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... 更多信息

max. wheel diameter: 400 mmgear width: 280 mmmax. module: 1 min. module: 4 total power requirement: 15 kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... 更多信息

hobbing length: 1750 mmmilling width: 260 mmmax. module: 10 min. module: 12 total power requirement: 8 kWweight of the machine ca.: 4500 kgdimensions of the machine ca.: mD O N A U - K N A P P (Germany)Universal Automatic Rack Milling MachineModel UZFM – V 300 H Year approx. 1980 Serial No. 80-234xMax. length of rack 1,750 mmMilling travel / milling width cross max. 260 mmModule, steel / cast iron 10 / 12Table clamping size 275 x 1,850 mmMounting height below cutter, depending on cutter Ø 136 – 410 mmCutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mmCutter width max. floating / with support 50 / 140 mmCutter mandrel Ø max.  ...

max. wheel diameter: 400 mmgear width: 75 mmmax. module: 0,5 min. module: 6 total power requirement: 25 kWweight of the machine ca.: 7000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... 更多信息

max. wheel diameter: 80 mmgear width: 150 mmmax. module: 2,5 min. module: total power requirement: 10 kWweight of the machine ca.: 2400 kgM I K R O N (Switzerland)Fully Automatic Gear Hobber for Worm GearsModel A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15_____________________________________________________ _______max. gear- without feed magazine approx. 80 mmmax. gear- with feed magazine approx. 50 mmModule max. 2, / 2,5 Axial milling length approx. 150 mmmax. workpiece-mounting length approx. 200 mmMilling slide can be swivelled up to 90 degreesMilling cutter - 24 - 50/63 mmMax. radial distance of milling slide 0-14/18 mmMilling cutter adjustment max. 25 mmMilling cutter speed 212 - 2.000 rpmAxial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation  ...

max. wheel diameter: 80 mmgear width: 44 mmmax. module: 5 min. module: Control: SIEMENS 840 C adjustment axis angle shaping sp. - wp table: -0,5 - +0,5 °stroke range: 250-1.500 DH/mincentre distance table/shaping spindle: -15 bis +170 mmmax. stroke length: 55 mmmax. helix angle: 45 max. tool diameter: 180 mmfeeds:: feed rotation axis of workpiece (100 mm wp diam.): mm/minfeed rotation axis of work piece (100 mm wp. diam.: 10-15.700 mm/minfeed center axis of machine column: 1 - 3.750 mm/min: 23 kwvoltage: 400 Voperating frequency: 50 Hzcontrol voltage: 24 V DCtotal power requirement: kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: 4,2 x 2,6 x 2,6 mequipment· stroke positioning adjustment controlled by CNC · stroke length adjustment mechanical-manually · machine is fixed to the ground with specific damping shoes (part of the delivery scope) · oil mist exhaust sys ...

最大砂轮直径： 180 mm 齿轮宽度： 45 mm 最大模块： 4 最小模块： 0,5 行程长度 最多： 0 - 52 mm 主轴锥度： innen MK 4 工作台直径： 160 mm 工作台孔径： 75 mm 行程数： 355 - 630 轮毂/最小进给范围：0.008 - 0.4 mm/轮毂尺寸 机器尺寸： 2.30 x 1.50 x 2.36 m功率容量： 6 kW机器重量约：2.500 kg

最大砂轮直径： 400 mm 齿轮宽度： 275 mm 齿轮宽度： 275 mm 最大模块数： 6 机器重量 CA.： 5,3 t变速： 100 mm 离心刀主轴 - 工件主轴： 40/265 mm滚刀车削速度： 50-400 U/min ... 更多信息

max. wheel diameter: 180 mmgear width: 45 mmmax. module: 4 min. module: 0,5 stroke length max.: 0 - 52 mmspindle taper: innen MK 4 table diameter: 160 mmtable bore diameter: 75 mmno. of strokes: 355 - 630 Hub/minfeed range: 0,008 - 0,4 mm/Hubdimensions of the machine ca.: 2,30 x 1,50 x 2,36 mpower capacity: 6 kWweight of the machine ca.: 2.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.