- LF 32 a(1)
- LF 32a(2)
- LFV 3(1)
- SPANNZANGEN(1)
- SRS 400(2)
- VRP500(1)
- WF10(3)
- ZK 200/1-TE CNC(1)
- ZK 5(1)
- ZK 7(1)
- ZP 320B(1)
- ZS 120T(1)
- ZS 150T(1)
- ZSA 550/220(1)
二手
二手
二手
二手
二手
轮子直径 - 最大 300 mm 主轴转速 250 - 2800 rpm 最小/最大进给量 45/125 mm 模块 8 锥度主轴 ISO 40 部分头部角度 110º 总功率要求 3 kW 机器重量约 1.5 吨 空间要求：约 1.5 x 1.4 x 1.9 m
二手
生产年份: 1976
二手
diameter:500 mm workpiece weight:30 kg test dia. min.:200 mm total power requirement:0,03 kW weight of the machine ca.:1000 kg dimensions of the machine ca.:1x0,5x1,06 m
二手
35 € Description: for workpiece clamping on lathes, grinding machines and dividing heads with high concentricity and holding force, for workpiece clamping (bar or chuck work) in conventional single-spindle lathes and CNC lathes directly in the spindle or in the collet chuck, smooth bores are mainly used in the counter spindle of CNC lathes . - including accessories according to pictures, quantity= 49 PCS weight approx.: 10 kg, Approx. Onsite Dimension. (l x w x h): 350 x 220 x 250 mm
生产年份: 1985
二手
groove width: 16 mm x-travel: 16-200 mm table length: 1500 mm table width: 375 mm milling spindle: ISO 40 max. clampable toolpiece shaft diameter: 30 mm max. useable hobs, normal diameter: 40 mm distance between milling spindle and table: 150-250 mm axial move. of milling spindle (auto./manual): 120 mm vertical adjust. of milling slide (manual): 100 mm weight of the machine ca.: 3,1 t dimensions of the machine ca.: 2,00x1,40x2,40 m K4 - TECHDETAIL UK: 0,11 kW K4 - TECHDETAIL UK: 0,6/1,1 kW K4 - TECHDETAIL UK: 3 x 0,012-0,05 mm/U K4 - TECHDETAIL UK: 16x60 mm K4 - TECHDETAIL UK: 12 x 280 - 3550 U/min K4 - TECHDETAIL UK: 0,85 kW K4 - TECHDETAIL UK: 0-2,0 mm K4 - TECHDETAIL UK: 250 mm Condition: ready for production The machine is suitable for the manufacture of flutes and slots using undersize cutters with hydraulic adjustment. Roughing and finishing can be done in one single clamping. ...
生产年份: 1991
二手
砂轮直径 - 最大： 0 mm 齿数 - 最大值： 0 模块 - 最大： 模块 - 最小值： 总功率要求： kW 机器重量 约： t 空间要求 大约： m CNC控制的同步器环铣床 ，适用于同步器环， BWO Ctrl 785 H 数据 fü， 此广告是使用 ModulMWS 创建的 - LogoTech oHG 的机器管理。
生产年份: 1977
二手
max. grinding diameter: 400 mm grinding width: 0 mm max. module: min. module: total power requirement: 3 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: m Shaver cutter Ø, min./max. 64 - 320 mm Module range 1 - 12 Shaver cutter width, max. 40 mm No. of teeth 13 - 240 Pitch block Ø 73 - 320 mm Speeds of workpiece slide 5 / 20 / 30 / 40 teeth per min. Grinding slide speed 690 rpm Grinding slide Ø 762 mm Grinding wheel swivelling (pressure angle) 5 - 21 ° Grinding slide swivelling (helical angle) 2 x 35 ° Grinding slide adjustment, vertical 240 mm Cutting speed 1 / 0.5 / 0.25 m/min Spindle drive 1.1 kW Total electrical load, approx. 3 kW - 500 V - 50 Hz Weight, approx. 4,200 kg Accessories / Special Features Machine is suitable for grinding internal and external shaver cutters. It is also suitable for master gears as well as cutters for gear shapers. Unfortunat ...
生产年份: 1975
二手
max. wheel diameter: 280 mm max. number of teeth: 100 max. module: 6 min. module: 1 total power requirement: 6 kW weight of the machine ca.: 2500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
二手
amount: 49 STK weight: 10 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
生产年份: 1988
二手
生产年份: 1989
二手
二手
max. grinding diameter: 400 mm : 18010 shaving cutter - diameter: 64 - 320 mm indexing: schleifbar 1 -12 Modul shaving wheel width: max. 40 mm number of teeth: 13 - 240 roller bend diameter min./max.: 73 - 320 mm slide speeds: 5-20-30-40 Zähne/min. max. dia. of grinding wheel: 762 mm grinding wheel - swivable: 5-21 ° grinding slide swivable +/-: 2 x 35 ° total power requirement: 3 kW weight of the machine ca.: 4,2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
生产年份: 1967
二手
切屑离心机， 剃须刀用变速器， 2 点 1 液压剃须刀， 另一个手动式，最大 550mm / 离心机切屑， 可变速度剃须刀， 2 点为小或 1 液压和手动，最大 550mm， 高： 2200 mm， 长： 1650 mm， 宽度： 1450 mm， 模块： 8， 重量： 6，500 Kg.， 电压： 220/380 W.， 总功率： 6.5 Kw.， 刀具最大 / 最小： 260/180 mm， 切刀最大 / 最小长度： 30/20 mm， 工件最大长度： 250 mm， 最大/最小工件： 550/20 mm. ， 规格： 通
