制药及化妆品设备 二手 出售

Used bachiller model PC-200 stainless steel vacuum mixer. 338 litre total capacity, 126-200 litre working capacity. Mixing bowl approximately 866 mm diameter x 650 mm straight side. Flat top and inverted dished bottom rated full vacuum. Stainless steel jacket rated 3 bar pressure. Anchor agitator with teflon scrapers driven by 2.2 kw 220/380 volt 3/50 1415 rpm or 2.55 kw 440 volt 3/60 1715 rpm motor through sabre model mas55df gearbox 69:1 reduction ratio. Approximately 220 mm diameter dispersion blade mixer direct driven by 7.5 kw 380 volt 3/50 1450 rpm or 8.6 kw 440 volt 3/60 1755 rpm motor. Lid raised and lowered by 0.55 kw 220/380 volt 3/50 1400 rpm or 0.63 kw 440 volt 3/60 1695 rpm hydraulic power pack. New 1987.

Used circulation dissolver HUBBES type HMUD with a capacity of 2000 l The all-purpose mixer is suitable for the preparation of different masses, such as creams, fat masses, etc. The container is made of stainless steel, single-walled. Three suspension points are mounted on the container, on which the container is stored and has been provided with load cells, for automatic loading and exact display of the contents. A manhole with protective circuit mounted in the drive dome enables monitoring of the mixing process as well as cleaning and maintenance work. The drive for the central shaft with wall scraper and the rotating dissolver shaft are located in the drive dome. For HUBBES, the central shaft for the wall scraper is typically designed without floor support. Four feed nozzles and an outlet for emptying are installed for loading the individual components. Useful volume: 3,00 ...

• 包装尺寸 L 45-300 mm、W 40-190 mm、H 16-100 mm，具体取决于规格设置 • 最大输出 47 次/分钟，最大输出取决于规格和产品 • 适用于所有热封薄膜（PP/PVC/PE/玻璃纸） • 薄膜卷外径.max 320 mm，宽度最大 425 mm • 90度进料带 • 带新刀的刀桥 • 带卸料杆的Eltex薄膜卸料机 • 穿孔刀 • 无撕裂线装置 • 不带多层堆垛机 • 各种格式部件 • 接触器控制 • 电气。连接 230/400V/50Hz

Allgaier vibrating screen, Sieve diameter:: 490 mm, Number of sieves:: 1, Mesh size:: 1,2 mm, Electric:: 380/400V , Dimensions (mm): 1100x700 H 1150  ... 更多信息

库存号 U2064 描述： 亚历山大维克（德国）用于压实粉末的生产线。生产� ��包括： - 进料系统 - 包括：50升粉末容器，旋转阀，真空泵，管道和袋式� �滤器。 - 水平，双螺杆，喂料机，工作速度可调，范围为0-77 rpm。 - 造粒系统 - 包括 - 制备制粒机和两个精密制粒机，RFG 150N型。所有制粒机均在 0-112 rpm 的范围内以可调速度工作。 - 带螺杆式搅拌器的中间罐，工作速度可调，范围为0-20 rpm。 - 亚历山大辊压实机 WP170/120V 型号，采用不锈钢设计。机器有两个辊子，每个辊子� ��120 mm x 直径170 mm，垂直安装。辊子在0-20 rpm范围内以可调速度工作。由齿轮箱和电机驱动 7.5 kW。辊子通过液压装置施加压力。最大压紧力可达 20 吨（186 巴）。1 厘米卷材长度上的最大压力可达 1.83 吨  ...

This machine is used to process a wide variety of ampoules and vials, the diameter of which can be up to 30 mm and height up to 140 mm. The machine only processes self-adhesive (adhesive) labels. Apart from the label dispenser fitted as standard, the machine can be equipped with a large number of devices additional: Coded tag reader Hot encoder Luminescence detector Print control station Output: store full” check Label reserve monitoring, Elec: 220/380 V / 2.2 Kw / 50 Hz , Dimensions (mm): 1900x2050 H 195, Diameter of ampoules and vials: Max 30mm , Height of ampoules and vials: Max 140mm, Weight (kg): 345

Powder turbo mixer (1x), Make Drais, Type T-2000 FM1, Year of construction: 1989, Material Mild steel, Working pressure jacket 3 Bar, T-arms , Capacity 2000 Ltr, Trough sizes dia. 1200x1950mm, Top connections dia. 300mm + dia. 100mm + dia. 25mm, Inspection hatch 600x450mm + 300x200mm, Outlet dia. 200mm, With jacket (105 Ltr), Max. temperature 143 Degr. C., With adjustable

Powder Mill powder mill Manufacturer: Glatt Model: TR 160 ... 更多信息

HAMMERMILL JESMA OPTI-700 – 60 Cv – 1,500 RPM The machine is located in Spain. ... 更多信息

适用于漏斗安瓿 1-30 毫升，具体取决于规格集 预热和封盖站，无燃烧站 最大产量 6,000 安瓿瓶/小时，取决于安瓿瓶尺寸 2个加油站，2个封口站 气体 + 氧气连接 2 个运输螺钉，2 个格式星星，用于 2 毫升安瓿 1 个运输螺钉，1 个尺寸星轮，直径为 11.75/H29 mm 12 泵 0.2-2.1 ml，很少使用 各种灌装针 吸入装置 驱动 400V/50Hz 移�

成型膜最大宽度 ： 150 mm 最大成型深度 ： 12 mm 机械输出 ： 每分钟 65 次循环 泡罩输出 ： 每分钟 300 个泡罩 热成型薄膜卷筒 ： 450 mm 直径 盖膜卷筒 ： 250 mm 直径 空气消耗 ： 约 10 Nm3/h 工作压力 ： 6-7 bar 冷却水 ： 0.12 M3/h 功耗： 12 Kw 重量 ： 1600 片剂喂料系统 ： 专用喂料机，用于 3 种不同的片剂彩色相机系统，带自动放电功�

安装功率：11 Kw. 功耗：5，5 Kw. 生产：15，50冲程每分钟，12 mm深度成型 15，40 storke/分钟用于28 mm深度成型 指数：最大145，222 mm 规格范围：成型面积220 mm长188mm宽度成型深度：12和28毫米，成型卷盘：460毫� �，覆盖卷盘：最大300毫米成型厚度：最小 0.1 毫米，最大 0.5 毫米 覆盖箔宽度 ： 最小 90 毫米 最大 210 毫米， 内部卷轴 ： 70..76 耗水量 ： aprox.0，1 立方米/小时压缩空气消耗量：约氧化。6 Nm3/h ， 无预热：约14Nm3/h， 带预�

equipped with a LAETUS system flask tilter Was previously used on a syrup line, Elec: 380V 50Hz, A + B (mm): 140mm max, A (mm): 15 - 90mm, B (mm): 12 - 70mm, C (mm): 50 - 200mm, Dimensions (mm): 2280 x 1570 mm, Height (mm): 1755 mm, Documentation: X in Spanish ... 更多信息

电耗： 4.0 kW 平均功耗： 3.5 kW 机械速度 最大 100 纸箱/分钟 产品电源： 最大 300 泡罩/分钟 尺寸： A x B x H 最小 30x15x70 mm 最大 100 x 85 x 150 mm 折叠机 招股说明书 Guk 尺寸。3000 x 1300 x 1660 mm 压缩空气消耗量 4-6 bar 无海拔 1-2 Nm3/h 与招股说明书 5-8 Nm3/h 用于招股说明书代码、案例和招股说明书的存�

GIUSTI mixing vessel 300mm dia x 470mm deep with shallow dish base, gross capacity 33 litres approx working capacity range 5-25 litres, top entry Silverson model AX3 homogeniser with 60mm dia workhead, 0.26kw 2730rpm 415v 3ph supply flameproof motor. Scraped surface main mixer, 30mm dia bottom product outlet. Stainless steel heating jacket, insulated and clad in rigid stainless steel, rated at 3bar w.p. 6bar t.p; Stainless steel control panel with 2 x amp meters, motor stop/start, LCD display for temp, variable speed control with RPM display for main motor. Overall dimensions 1350mm x 800 x 1660mm high. Supplied new in 1990, previously used on cosmetic product manufacture, excellent condition.

Lodige FM130D ploughshare mixer, Serial: 12321, 130L ploughshare mixer, stainless internals with stainless breaker, bottom mounted discharge with manual discharge valve, 3Ph this extra information is standard for this model. Please always double-check the details during a visit The Lodige FM130D Multishaft mixer is a high-performance pharmaceutical machine designed for mixing and blending powders, granules, and other pharmaceutical ingredients with exceptional precision and efficiency. With a capacity of up to 130 liters, this model is suitable for small to medium-scale pharmaceutical production processes. Equipped with multiple mixing shafts and a unique mixing mechanism, the Lodige FM130D ensures thorough and homogeneous blending of ingredients, resulting in consistent product quality and uniform distribution of active pharmaceutical ingredients (APIs) throughout the mixture. ...

Used powder mixer LANCELIN-FR type M-100-L, with approx. 100 l useful capacity. ... 更多信息

• 有效容量 663 l • 双层夹克 48 升 • 工作温度 160C • 工作超压罐 -1/2 bar • 双层护套最大 6 bar • 容器可以倾斜进行清空 • 通过外部提升装置排空的提升盖（不包括在内） • 与不锈钢 1.4435 （AISI 316 L） 产品接触的部件 • 螺旋桨搅拌器 2.6 kW • 带侧刮刀的锚式搅拌器 2.2 kW • 温度显示 •压力计 • 压力盖中的软管连接，带矛形水龙头 • 视镜 •照明 • 压力接头 • 驱动 380V/50Hz

N of Station 35 每小时输出片剂 70.000 - 210.000 最大片剂直径 16 mm 最大填充深度 8.5 mm 上冲床入口 1.5 - 8 mm 模具类型 B 模具模具直径 30.1 mm 模具高度 22.22 mm 上/下冲头长度 133 mm 冲头体直径 19.05 mm 压缩力 80 kN 功率 3.75 kW 净重 1143 Kg 也可用于掺杂层�

• Format range folding box (5 inch) width 15-90, height 12-70, length 50-200 mm • Product length max. 155 mm • Output 20-120 cartons/min, clocked motion, the maximum speed depends on the format and product • Centrally adjustable product chain • Closure double-sided offset or equilateral tuck-in flaps • Leaflet folding and inserting machine from magazine GUK FA21/4, Cartonac 81 • Code reading Laetus Argus 4 (2x brochure, 1x folding box) • Colour embossing unit on both sides • Bad ejection with ejection counter control • Vacuum pump • Electronic cam gear retrofitted • SPS CAM • Various format parts (insertion hopper) • Various spare parts • Electr. connection 400V/50 Hz