二手 ZMM 出售

turning diameter over bed: 1090 mm turning diameter over slide rest: 690 mm turning length: 1500 (bis 6000) mm spindle bore: 155 mm turning dia. in gap: 1250 mm spindle turning speed range: 5 - 1000 U/min thread: 80 Stufen metric threading: 0,5 - 480 thread - module: 0,125 - 120 mm thread - inch: 60 - 1 1/16 inch. Whitworth-thread: 240 - 1/4 TPI bed width: 700 mm spindle cone: Gr. 15 number of feeds: 160 longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm face slide travel: 525 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MK 6 quill stroke: 260 mm total power requirement: 22 (Option 30) kW weight of the machine ca.: ca. 6000 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: A ...

turning diameter over bed: 580 mm turning diameter over slide rest: 380 mm turning length: 3000 (1000 - 5000 mm) mm spindle bore: 72 mm turning dia. in gap: 780 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3210 kg LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also ...

turning diameter over bed: 660 mm turning diameter over slide rest: 420 mm turning length: 1500 (2m, 3m, 4m, 5m, 6m) mm turning dia. in gap: 850 mm bed width: 560 mm spindle nose: 11 spindle bore: 103 mm transmission ratio: 3 spindle turning speed - stepless: 9-55, 37-220, 220-1320 U/min thread: 76 Stufen metrical thread cutting: 0,5 - 180 mm thread - inch: 60 - 1/6 inch. thread - module: 0,125 - 45 Whitworth-thread: 240 - 2/3 DP number of feeds: 150 mm/U longitudinal feeds:: 0,039 - 18 mm/U face feeds: 0,02 - 9 mm/U face slide travel: 410 mm upper slide-adjustment: 150 mm diameter of quill: 105 mm : MK 6 quill stroke: 225 mm total power requirement: 15 kW weight of the machine ca.: 4170 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these ...

turning diameter over bed: 760 mm turning diameter over slide rest: 520 mm turning length: 4000 (1,5m,2m,3m,5m, 6m) mm turning dia. in gap: 950 mm bed width: 560 mm spindle nose: 11 spindle bore: 132 mm transmission ratio: 3 spindle turning speed - stepless: 12,5-100, 50-415,150-1250 U/min thread: 76 Stufen metrical thread cutting: 0,5 - 180 mm thread - inch: 60 - 1/6 inch. thread - module: 0,125 - 45 Whitworth-thread: 240 - 2/3 DP number of feeds: 150 mm/U rapid traverse longitudinal: 3800 mm/min longitudinal feeds:: 0,039 - 18 mm/U face feeds: 0,02 - 9 mm/U face slide travel: 410 mm upper slide-adjustment: 150 mm rapid traverse of cross-rail supports: 1900 mm/min diameter of quill: 105 mm : MK 6 quill stroke: 225 mm total power requirement: 15 (18,5) kW weight of the machine ca.: 5800 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. ...

turning diameter over bed: 660 mm turning diameter over slide rest: 420 mm turning length: 4000 (1,5m,2m,3m,5m, 6m) mm turning dia. in gap: 850 mm bed width: 560 mm spindle nose: 11 spindle bore: 103 mm transmission ratio: 3 spindle turning speed - stepless: 9-55, 37-220, 220-1320 U/min thread: 76 Stufen metrical thread cutting: 0,5 - 180 mm thread - inch: 60 - 1/6 inch. thread - module: 0,125 - 45 Whitworth-thread: 240 - 2/3 DP number of feeds: 150 mm/U longitudinal feeds:: 0,039 - 18 mm/U face feeds: 0,02 - 9 mm/U face slide travel: 410 mm upper slide-adjustment: 150 mm diameter of quill: 105 mm : MK 6 quill stroke: 225 mm total power requirement: 15 kW weight of the machine ca.: 5500 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these  ...

turning diameter over bed: 860 mm turning diameter over slide rest: 620 mm turning length: 4000 (1,5m,2m,3m,5m, 6m) mm turning dia. in gap: 1050 mm bed width: 560 mm spindle nose: 11 spindle bore: 132 mm transmission ratio: 3 spindle turning speed - stepless: 12,5-100, 50-415,150-1250 U/min thread: 76 Stufen metrical thread cutting: 0,5 - 90 mm thread - inch: 60 - 1/3 inch. thread - module: 0,125 - 22,5 Whitworth-thread: 240 - 1 1/3 DP number of feeds: 150 mm/U rapid traverse longitudinal: 3800 mm/min longitudinal feeds:: 0,039 - 18 mm/U face feeds: 0,02 - 9 mm/U face slide travel: 432 mm upper slide-adjustment: 150 mm rapid traverse of cross-rail supports: 1900 mm/min diameter of quill: 105 mm : MK 6 quill stroke: 225 mm total power requirement: 18,5 kW weight of the machine ca.: 6300 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected.  ...

turning diameter over bed: 440 mm turning diameter over slide rest: 240 mm turning length: 1000 (1500, 2000- 5000mm) mm spindle bore: 72 mm turning dia. in gap: 640 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 2900 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use.  ...

turning diameter over bed: 325 mm turning diameter over slide rest: 190 mm turning length: 500, 750, 1000 mm spindle bore: 32 mm turning dia. in gap: 440 mm spindle turning speed range: (12) 85 - 2000 U/min metric threading: (48) 0,1 -28 mm thread - inch: (53) 75 -2,5 inch. thread - module: (19) 0,1 - 1,75 Tpi Whitworth-thread: (19) 70 - 4 DP bed width: 200 mm spindle cone: gr. 5 number of feeds: 48 mm/U longitudinal feeds:: 0,006 - 1,77 mm/U face feeds: 0,003 - 0,888 mm upper slide-adjustment: 95 mm diameter of quill: 40 mm : gr. 3 quill stroke: 100 mm total power requirement: 2,2 kW weight of the machine ca.: 770 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU 325 is ideal for small s ...

turning diameter over bed: 580 mm turning diameter over slide rest: 380 mm turning length: 1000 bis 5000 mm spindle bore: 72 mm turning dia. in gap: 780 mm spindle turning speed - stepless: 10 - 1200 U/min metric threading: 0,5 - 120 thread - module: 0,125 - 30 mm thread - inch: inch. Whitworth-thread: 0,25 -60 TPI bed width: 400 mm spindle cone: Gr. 8 number of feeds: 80 mm/U longitudinal feeds:: 0,04 -12 mm/U face feeds: 0,02 - 6 mm thread: 64 Stufen face slide travel: 315 mm upper slide-adjustment: 130 mm diameter of quill: 75 mm : MT5 quill stroke: 250 mm total power requirement: 11 kW weight of the machine ca.: 2710 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1,5m, 2 m - 6 m. v ...

turning diameter over bed: 325 mm turning diameter over slide rest: 190 mm turning length: 750 (500 o.1000) mm spindle bore: 32 mm turning dia. in gap: 440 mm spindle turning speed range: (12) 85 - 2000 U/min metric threading: (48) 0,1 -28 mm thread - inch: (53) 75 -2,5 inch. thread - module: (19) 0,1 - 1,75 Tpi Whitworth-thread: (19) 70 - 4 DP bed width: 200 mm spindle cone: gr. 5 number of feeds: 48 mm/U longitudinal feeds:: 0,006 - 1,77 mm/U face feeds: 0,003 - 0,888 mm upper slide-adjustment: 95 mm diameter of quill: 40 mm : gr. 3 quill stroke: 100 mm total power requirement: 2,2 kW weight of the machine ca.: 720 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU 325 is ideal for small ...

: neu : 2023 : 1675 : prompt, Zwischenverkauf v : Bulgarien : 21070 € : 431.94 € : 1 : 325 mm : 1000 mm : 165 mm : 32 mm : 190 mm : 200 mm : 5 : 4,5 M : 12 : 85 - 2.000 1/min : 48 : 0.006 - 1.77 mm/U : 0.003 - 0.885 mm/U : 0.1 - 28 mm : 75 - 2,5 Gänge/ : 0.1 - 1.75 : 4 - 70 : 150 mm : 95 mm : 40 mm : 3 MK : 100 mm : 2.2 kW : 2150 mm : 950 mm : 1350 mm : 770 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", incl. following optional equipment: 1 lenght stop FURTHER TURNING LENGTHS ON REQUEST The d ...

: neu : Bulgarien : 40800 € : 828.24 € : 500 mm : 1500 mm : 250 mm : 72 mm : 300 mm : 400 mm : 8 : 80 M : 21 : 20-2000 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 64 : 0.5 - 120 mm : 0.125 - 30 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 2950 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 39.720,- turning length2.000 mm € 42.390,- turning length3.000 mm € 46.740,- turning length4.000 mm € 51.830,- turning l ...

: gebraucht : 1991 : 1681 : ca. 2 Wochen ab Auftragse : Bulgarien : 7900 € : 1 : 580 mm : 2000 mm : 285 mm : 72 mm : 380 mm : 400 mm : DIN55022, Größe 8 : 80 M : 11,2 - 2000 1/min : 0.04 - 3 mm : 255 mm : 140 mm : 75 mm : 5 MK : 200 mm : 7.5 kW : 3550 mm : 1250 mm : 1630 mm : 3450 kg 3-axes digital read out RSF 3-jaw chuck Forkardt Dm. 315 mm steady rest 4x steel holder gap bed type chuck protection machine lamp coolant equipment operating manual in German WITH FOLLOWING DEFECT: the clockwise rotation does not engage, so the hand lever must remain held The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : Bulgarien : 49390 € : 1002.62 € : 630 mm : 2000 mm : 315 mm : 103 mm : 430 mm : 400 mm : 11 : 120 M : 21 : 12,5 - 1250 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 240 - 1 : 315 mm : 90 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3310 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 46.620,- turning length1.500 mm € 47.600,- turning length3.000 mm € 53.540,- turning ...

: gebraucht : 2020 : 1658 : prompt, Zwischenverkauf v : Bulgarien : 26500 € : 1 : 400 mm : 1000 mm : 200 mm : 52 mm : 235 mm : 320 mm : 6 : 6 M : 12 : 50-2.240 1/min : 80 : 0.015 - 0.6 mm/U : 0.0075 - 0.3 mm/U : 40 : 0.25 - 7.5 mm : 120 - 4 Gänge/ : 0.0625 - 1.875 : 16 - 480 : 235 mm : 110 mm : 50 mm : 4 MK : 100 mm : 4 kW : 2750 mm : 1100 mm : 1600 mm : 1540 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultifix Type Bwith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual  ...

: neu : Bulgarien : 71220 € : 1431.52 € : 760 mm : 3000 mm : 380 mm : 132 mm : 520 mm : 560 mm : 11 : 140 M : 17 : 7,5 - 1015 1/min : 150 : 0.039 - 18 mm/U : 0.02 - 9 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 410 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 4470 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: tu ...

: neu : 2022 : 1672 : prompt, Zwischenverkauf v : Bulgarien : 33100 € : 671.93 € : 1 : 1 : 400 mm : 1000 mm : 200 mm : 52 mm : 235 mm : 320 mm : 6 : 6 M : 12 : 50-2.240 1/min : 80 : 0.015 - 0.6 mm/U : 0.0075 - 0.3 mm/U : 40 : 0.25 - 7.5 mm : 120 - 4 Gänge/ : 0.0625 - 1.875 : 235 mm : 110 mm : 50 mm : 4 MK : 100 mm : 4 kW : 2750 mm : 1100 mm : 1600 mm : 1540 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultisuissewith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual mach ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 68840 € : 1383.68 € : 600 mm : 1500 mm : 300 mm : 80 mm : 400 mm : 400 mm : 8 : 90 M : 3 : 20 - 100, 80 - 400, 400 - U/Min : max. 8 m/min : max. 8 m/min : 290 mm : 90 mm : 5 MK : 225 mm : 11 kW : 3,5 / 22 kW/Nm : 1,75 / 11 kW/Nm : 120 Nm : 1250 daN : 1050 daN Fast and simple communication between the operator and the lathe. Simple workpieces are machined in the same way as on the universal lathe, but more efficient. Complicated workpieces are machined in the same way as on the universal lathe, but faster. Complicated workpieces are machined in the same way as on the CNC lathe, but easier. Based on the controller Schneider Magelis the intelligent, self-developed ZMM Sliven software leads the operator also without programming skills simple and fast to the finished workpiece. The interface is simple and with large icons, which is convenien ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 75720 € : 1521.97 € : 860 mm : 3000 mm : 430 mm : 132 mm : 620 mm : 560 mm : 11 : 140 M : 17 : 7,5 - 1015 1/min : 150 : 0.039 - 18 mm/U : 0.02 - 9 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 240 - 2/3 : 435 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 3470 mm : 1700 mm : 1730 mm : 4650 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating m ...

: neu : Bulgarien : 105460 € : 2098.65 € : 1090 mm : 3000 mm : 500 mm : 155 mm : 690 mm : 700 mm : 15 : 160 M : 24 : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 525 mm : 270 mm : 125 mm : 6 MK : 260 mm : 22 kW : 7500 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS turning length1.500 mm € 92.180,- turning length4.000 mm € 112.870,- turning length5.000 mm € 123.060,- turning length6.00 ...

: neu : Bulgarien : 121780 € : 2423.42 € : 1320 mm : 3000 mm : 625 mm : 155 mm : 940 mm : 700 mm : 15 : 160 M : 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 1/16 - 60 Gänge/ : 0.125 - 120 : 685 mm : 270 mm : 125 mm : 6 MK : 260 mm : 30 kW : 8550 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 108.130,- turnin ...

: neu : Bulgarien : 84100 € : 1690.41 € : 860 mm : 3000 mm : 430 mm : 135 mm : 620 mm : 560 mm : 11 : 140 M : 7 - 42, 28 - 170, 165 - 1 U/Min : 150 : 0.039 - 18 mm/U : 0.02 - 9 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 240 : 435 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 4650 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low volt ...

: neu : Bulgarien : 110020 € : 2189.4 € : 890 mm : 3000 mm : 400 mm : 155 mm : 490 mm : 700 mm : 15 : 160 M : 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 525 mm : 270 mm : 125 mm : 6 MK : 260 mm : 30 kW : 7500 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 96.170,- turning l ...

: neu : Bulgarien : 99560 € : 2001.16 € : 890 mm : 3000 mm : 400 mm : 155 mm : 490 mm : 700 mm : 15 : 160 M : 24 : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 525 mm : 270 mm : 125 mm : 6 MK : 260 mm : 22 kW : 7500 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 86.280,- turning length2.000 mm € 89.420,- turning length4.000 mm € 106.810,- turning length5.000  ...

: neu : Bulgarien : 115920 € : 2306.81 € : 1090 mm : 3000 mm : 500 mm : 155 mm : 690 mm : 700 mm : 15 : 160 M : 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 240 : 525 mm : 270 mm : 125 mm : 6 MK : 260 mm : 30 kW : 8050 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 102.070,-  ...

: neu : Bulgarien : 111510 € : 2219.05 € : 1320 mm : 3000 mm : 625 mm : 155 mm : 940 mm : 700 mm : 15 : 160 M : 5 - 1000 : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 685 mm : 270 mm : 125 mm : 6 MK : 260 mm : 8550 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 98.230,- turning length4.000 mm € 118.820,- turning length5.000 mm € 120.010,- turning length6.00 ...

: neu : ca. 6 Monate ab Auftragse : Bulgarien : 50600 € : 600 mm : 2000 mm : 300 mm : 80 mm : 400 mm : 400 mm : 8 : 90 M : 3 : 20 - 100, 80 - 400, 400 - U/Min : 120 : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3600 mm : 1500 mm : 1650 mm : 3110 kg In contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter. It is possible to ensure a ",constant cutting speed", (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer&apos,s request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display. driven by variable speed control (3 steps) 3-axes digital readout Fagor with CSS (con ...

: neu : ca. 6 Monate ab Auftragse : Bulgarien : 78300 € : 1566 € : 760 mm : 3000 mm : 380 mm : 132 mm : 520 mm : 560 mm : 11 : 140 M : 3 : 7 - 42, 28 - 170, 165 - 1 U/Min : 150 : 0.039 mm/U : 0.02 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 2 - 240 : 410 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 4470 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position steady and following rest coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill ...

: neu : ca. 6 Monate ab Auftragse : Bulgarien : 46190 € : 933.04 € : 500 mm : 1500 mm : 250 mm : 75 mm : 300 mm : 400 mm : 8 : 80 M : 3 : 25-100, 100-400, 500-2000 U/Min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 0.5 - 120 mm : 0.125 - 30 : 1 - 240 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 11 kW : 2950 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length 1.000 mm € 45.150,- turning  ...

: neu : ca. 6 Monate ab Auftragse : Bulgarien : 55600 € : 1112 € : 630 mm : 2000 mm : 315 mm : 103 mm : 430 mm : 400 mm : 11 : 120 M : 3 : 16 - 63, 63 - 250, 315 - U/Min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 0.5 - 120 mm : 060 - 1/4 Gänge/ : 0.125 - 30 : 1 - 240 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3310 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length 1.000 mm � ...

: neu : ca. 6 Monate ab Auftragse : Bulgarien : 23160 € : 472.46 € : 400 mm : 750 mm : 165 mm : 32 mm : 190 mm : 200 mm : 5 : 4,5 M : 2 : 85-405, 470-2200 U/Min : 48 : 0.006 - 1.77 mm/U : 0.003 - 0.885 mm/U : 0.1 - 28 mm : 0.1 - 1.75 : 4 - 70 : 150 mm : 95 mm : 40 mm : 3 MK : 100 mm : 2.2 kW : 770 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 23.480,- The data for this ad was created with ModulMWS  ...

: neu : ca. 6 Monate ab Auftragse : Bulgarien : 37580 € : 759.12 € : 400 mm : 750 mm : 200 mm : 52 mm : 235 mm : 320 mm : 6 : 6 M : 4 : 18-98, 48-265, 144-790, 3 U/Min : 80 : 0.015 - 0.6 mm/U : 0.0075 - 0.3 mm/U : 40 : 0.25 - 7.5 mm : 120 - 4 Gänge/ : 0.0625 - 1.875 : 16 - 480 : 235 mm : 110 mm : 50 mm : 4 MK : 100 mm : 7.5 kW : 1530 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length 1.000 mm € 38.210,- turning  ...

: neu : 2024 : 1682 : prompt, Zwischenverkauf v : Bulgarien : 43490 € : 882.85 € : 1 : 600 mm : 2000 mm : 300 mm : 80 mm : 400 mm : 400 mm : 8 : 90 M : 21 : 20 - 2000 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 7.5 kW : 3600 mm : 1250 mm : 1400 mm : 3110 kg driven by conventional gearbox 3-axes digital readout Fagor 40i quick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round) 3-jaw chuck Bison3204/DIN6350, Ø 250 mm spindle dead center four way rapid traverse device electromagnetic brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE&q ...

Spindle power: 15kW Incl. glasses

Height of centers : 400 mm Swing over bed : 890 mm Swing over cross slide : 490 mm Swing in gap : 1050 mm Width of bed : 700 mm Distance between centers : 1500 mm Spindle nose DIN 55027 : No. 15 Spindle bore : 155 mm Spindle taper : 160 Metric Number of spindle speeds : 24 Spindle speed ranges : 6,3 - 1250 Main motor power : 22 (30) kW Number of feeds : 160 Longitudinal feed range : 0,032 - 38,9 mm/rev Cross feed range : 0,016 - 19,45 mm/rev Number of threads : 80 (of each type) Metric thread range : 0,5 - 480 mm Inch thread range : 60 - 1/16 Tpi Module thread range : 0,125 - 120 Module DP thread range : 240 - 1/4 DP Cross slide travel : 525 mm Top slide travel : 270 mm Quill diameter : 125 mm Quill taper : No. 6 Morse Quill travel : 260 mm For DBC 3000 mm : 7500 kg

中心高度： 0 毫米 中心距离： 1500 毫米 主轴孔径： 155 毫米 使 ZMM 1.000 毫米 C 型 13 SH 2001年德莱班克德雷马希内车床 摆幅中心高度（毫米）= 1.000 中心距（毫米）DBC = 1.500 主轴孔径 = 155 速度 22 级 1.000 rpm 2轴数字读数 t4 卡盘 1.000 mm  

Center height: 160 mm Center distance: 750 mm Spindle bore: 0 mm MACH-id   3717 MAKE    ZMM Sliven TYPE    HU 310 VAC YEAR    1999 SPECIFICATIONS Swing over bed Ø  320 mm Swing over cross slide   185 mm Distance between centres   750 mm Work piece weight   100 kg Spindle bore    32 mm Spindle speeds / ranges    Vario 2200 Rpm Bed width   200 mm Power    2.2 Kw DIMENSIONS Length   1885 mm Width    1100 mm Height   1730 mm