二手 ZMM 出售

ZMM C11MB传统车床在保加利亚制造，用于加工最大长度为10 00 mm，直径为460 mm（床身上方车削）或350 mm（支撑上方车削）的工件。提供的坚不可摧设计的C- 11MB x 1000 mm万能车床配备了7.5 kW主电机和高速主轴，可为用户提供最大的生产率和� �靠性。 ZMM C11MB金属车床技术参数 - 最大工件直径（床身上方车削）：460 mm - 最大工件直径（翻转支撑）：350 mm - 象牙处的最大工件长度：1000 mm - 最大主轴转速：2000 rpm - 最低主轴转速：16 rpm - 主轴转速数：18 - ZMM C-11MB 车床电机功率： 7.5 kW

ZMM CU 502 - 万能车床 - 中心高度：250mm - 中心间距：1500毫米 - 床上方旋转直径：500 mm - 滑块上方的旋转直径：240 mm - 主轴孔径：72毫米 - 主轴转速：16 - 2000 rpm（18 级） - 发动机功率：10 kW - 工作电压： 400 V / 15 - 25 A - 宽x高x深尺寸：3100 x 1400x x 1250毫米 - 重量：约 3120 公斤

车床状况良好，机械性能如新。 技术数据： - 中心高度：417毫米 - 中心之间的距离：2000毫米 - 杆通道 113mm - 工作台宽度：560毫米 - 工作台车削直径：830 mm - 车子的车削直径：510毫米 -看 除非出售，否则可立即交付。 机器状况良好，像新的一样�

车床允许操作员在手动、自动或组合操作之间进行选� ��。借助直观的软件，操作员可以毫不费力地对操作� �循环进行编程，直至成品零件。 规格： 床身循环直径： 600 mm， 滑块循环直径： 400 mm， 棒材通道： 80 mm， 驱动功率：11 KW，3 个齿轮级主轴转速 8-2,000 rpm 标准配件： 纵向和平坦的快速移动，电子手轮，脚制动器，Multifi x C”，3 靴卡盘 250 mm

Description: Spindle speed: 16 - 2000 rpm Center length: approx. 1600 mm Center height above bed: approx. 300 mm Turning diameter above bed: approx. 600 mm Seat height above support: approx. 200 mm Turning diameter above support: approx. 400 mm The machine is equipped with a tailstock, a clamping holder and a three-jaw chuck (diameter: 250 mm) Spindle clearance: approx. 74 mm weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 1,000 x 1,800 mm

Description: Height of centers mm: 420 Swing diameter over bed mm: 830 Swing diameter over carriage mm: 585 Swing diameter over gap in bed mm: 1020 Width of ways mm: 520 Distance between centers mm: 3000 Spindle nose DIN 55027№11 Spindle nose taper mm: 103 Spindle bore mm: 120 Drehlänge: 3,000 mm, turning diameter over bed: 1,020 mm, turning diameter over slide: 585 mm, spindle bore: 120 mm, weight approx.: 5,500 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 5,500 x 1,600 mm

Description: Fabrication number 20454  , including: 3-jaw chuck steady rest , tailstock , existing documentation Drehlänge: 1,500 mm, turning diameter over bed: 500 mm, turning diameter over slide: 300 mm, spindle bore: 62 mm, weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 1,000 x 1,400 mm

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1000 bis 5000 mm spindle bore: 103 mm turning dia. in gap: 700 mm number of spindle speeds: 11,5 - 1400 metric threading: 0,5 - 120 thread - module: 0,125 - 30 mm Whitworth-thread: 0,25 - 60 TPI bed width: 400 mm spindle cone: Gr. 11 number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm thread: 64 Stufen face slide travel: 315 mm upper slide-adjustment: 130 kW diameter of quill: 130 mm : MTS quill stroke: 250 mm total power requirement: 11 kW weight of the machine ca.: 2800 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: 1,5m, 2m, 3m and 4m. variable speed, 3 steps rapid traverse throu ...

turning diameter over bed: 440 mm turning diameter over slide rest: 230 mm turning length: 2000 (or 1000, 1500 mm) mm spindle bore: 62 mm turning dia. in gap: 620 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 360 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 2150 mm upper slide-adjustment: 130 mm diameter of quill: 70 mm : MK 5 quill stroke: 180 mm total power requirement: 4,0 kW weight of the machine ca.: 2560 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU ...

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1000 (or 1500, 2000 mm) mm spindle bore: 62 mm turning dia. in gap: 620 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 360 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 2150 mm upper slide-adjustment: 130 mm diameter of quill: 70 mm : MK 5 quill stroke: 180 mm total power requirement: 4,0 kW weight of the machine ca.: 2230 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU ...

turning diameter over bed: 400 mm turning diameter over slide rest: 236 mm turning length: 1500 (or 750, 1000) mm spindle bore: 52 mm turning dia. in gap: 550 mm spindle turning speed range: (12) 50 - 2240 U/min metric threading: 0,25 - 7,5 mm thread - inch: 120 - 4 inch. thread - module: 0,0625 - 1,875 Tpi Whitworth-thread: 480 - 16 DP bed width: 320 mm spindle cone: gr. 6 (DIN 55027) number of feeds: 80 mm/U longitudinal feeds:: 0,015 - 0,6 mm/U face feeds: 0,0075 - 0,3 mm cross adjustment: 235 mm upper slide-adjustment: 110 mm diameter of quill: 50 mm : MK 4 quill stroke: 100 mm total power requirement: 4,0 kW weight of the machine ca.: 1700 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. T ...

turning diameter over bed: 440 mm turning diameter over slide rest: 230 mm turning length: 1000 (or 1000, 2000 mm) mm spindle bore: 62 mm turning dia. in gap: 620 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 360 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 2150 mm upper slide-adjustment: 130 mm diameter of quill: 70 mm : MK 5 quill stroke: 180 mm total power requirement: 4,0 kW weight of the machine ca.: 2560 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU ...

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 2000 (or 1000, 1500 mm) mm spindle bore: 62 mm turning dia. in gap: 620 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 360 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 2150 mm upper slide-adjustment: 130 mm diameter of quill: 70 mm : MK 5 quill stroke: 180 mm total power requirement: 4,0 kW weight of the machine ca.: 2630 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU ...

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1500 (or 1000, 2000 mm) mm spindle bore: 62 mm turning dia. in gap: 620 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 360 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 2150 mm upper slide-adjustment: 130 mm diameter of quill: 70 mm : MK 5 quill stroke: 180 mm total power requirement: 4,0 kW weight of the machine ca.: 2430 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU ...

turning diameter over bed: 400 mm turning diameter over slide rest: 236 mm turning length: 1000 (or 750, 1500) mm spindle bore: 52 mm turning dia. in gap: 550 mm spindle turning speed range: (12) 50 - 2240 U/min metric threading: 0,25 - 7,5 mm thread - inch: 120 - 4 inch. thread - module: 0,0625 - 1,875 Tpi Whitworth-thread: 480 - 16 DP bed width: 320 mm spindle cone: gr. 6 (DIN 55027) number of feeds: 80 mm/U longitudinal feeds:: 0,015 - 0,6 mm/U face feeds: 0,0075 - 0,3 mm cross adjustment: 235 mm upper slide-adjustment: 110 mm diameter of quill: 50 mm : MK 4 quill stroke: 100 mm total power requirement: 4,0 kW weight of the machine ca.: 1400 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. T ...

turning diameter over bed: 440 mm turning diameter over slide rest: 230 mm turning length: 1500 mm(or 1000, 2000mm) mm spindle bore: 62 mm turning dia. in gap: 620 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 360 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 250 mm upper slide-adjustment: 130 mm diameter of quill: 70 mm : MK 5 quill stroke: 180 mm total power requirement: 4,0 kW weight of the machine ca.: 2350 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU ...

turning diameter over bed: 630 mm turning diameter over slide rest: 430 mm turning length: 1000, 1500 - 5000 mm spindle bore: 103 mm turning dia. in gap: 830 mm throat: 400 mm spindle turning speed - stepless: 15 / 11,5 - 1250 U/min metric threading: 0,5 - 120 thread - module: 0,125 - 30 mm thread - inch: 60 - 1/4 TPI Whitworth-thread: 240 - 1 DP bed width: 500 mm spindle cone: 120 Metrisch number of feeds: 64 mm/U longitudinal feeds:: 0,04 -12 mm/U face feeds: 0,02 - 6 mm thread: 64 Stufen face slide travel: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MT5 quill stroke: 230 mm total power requirement: 11 kW weight of the machine ca.: 3010 kg Very robust European lathes come from the ZMM program. The lathes are perfect for all industrial applications. These machines are very popular in 93 countries around the world. The CU 630 model is available in the turning lengths ...

turning diameter over bed: 890 mm turning diameter over slide rest: 490 mm turning length: 1500 bis 6000 mm spindle bore: 155 mm turning dia. in gap: 1050 mm spindle turning speed - stepless: 10 - 1200 U/min metric threading: 0,5 - 480 thread - module: 0,125 - 120 mm thread - inch: inch. Whitworth-thread: 0,0625 - 60 TPI bed width: 700 mm spindle cone: Gr. 15 number of feeds: 80 mm/U longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm thread: 80 Stufen face slide travel: 525 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MT6 quill stroke: 250 mm total power requirement: 250 kW weight of the machine ca.: 6550 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1 ...

turning diameter over bed: 1090 mm turning diameter over slide rest: 690 mm turning length: 3000 (1500 bis 6000) mm spindle bore: 155 mm turning dia. in gap: 1250 mm spindle turning speed range: 5 - 1000 U/min thread: 80 Stufen metric threading: 0,5 - 480 thread - module: 0,125 - 120 mm thread - inch: 60 - 1 1/16 inch. Whitworth-thread: 240 - 1/4 TPI bed width: 700 mm spindle cone: Gr. 15 number of feeds: 160 longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm face slide travel: 525 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MK 6 quill stroke: 260 mm total power requirement: 22 (0ption 30) kW weight of the machine ca.: 8000 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in:  ...

turning diameter over bed: 1320 mm turning diameter over slide rest: 940 mm turning length: 6000 (1500 bis 6000) mm spindle bore: 155 mm turning dia. in gap: 1500 mm spindle turning speed range: 5 - 1000 U/min metric threading: 0,5 - 480 mm thread: 80 Stufen thread - module: 0,125 - 120 mm thread - inch: 60 - 1/!16 inch. Whitworth-thread: 0,0625 - 60 TPI bed width: 700 mm spindle cone: Gr. 15 number of feeds: 160 mm/U longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm face slide travel: 685 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MT6 quill stroke: 250 mm total power requirement: 22 (30) kW weight of the machine ca.: ca. 11500 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also availabl ...

turning diameter over bed: 440 mm turning diameter over slide rest: 240 mm turning length: 1500 (1000, 5000mm) mm spindle bore: 72 mm turning dia. in gap: 640 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 3100 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3100 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The C ...

turning diameter over bed: 440 mm turning diameter over slide rest: 240 mm turning length: 2000 (1000, 1500 -5000mm) mm spindle bore: 72 mm turning dia. in gap: 640 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 3100 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3300 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. ...

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1000 bis 4000 mm spindle bore: 72 mm turning dia. in gap: 700 mm spindle turning speed - stepless: 20 - 2000 U/min metric threading: 0,5 - 120 thread - module: 0,125 - 30 mm thread - inch: inch. Whitworth-thread: 0,25 - 60 TPI bed width: 400 mm spindle cone: Gr. 8 number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm thread: 64 Stufen face slide travel: 315 mm upper slide-adjustment: 130 kW diameter of quill: 75 mm : MTS quill stroke: 230 mm total power requirement: 11 kW weight of the machine ca.: 2650 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: 1,5m, 2m, 3m and 4m. variable speed ...

turning diameter over bed: 580 mm turning diameter over slide rest: 380 mm turning length: 1500 (1000 - 5000mm) mm spindle bore: 72 mm turning dia. in gap: 780 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 2910 kg LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also  ...

turning diameter over bed: 630 mm turning diameter over slide rest: 430 mm turning length: 1000 bis 5000 mm spindle bore: 103 mm turning dia. in gap: 830 mm spindle turning speed - stepless: 20 - 2000 U/min metric threading: 0,5 - 120 thread - module: 0,125 - 30 mm thread - inch: inch. Whitworth-thread: 0,25 -60 TPI bed width: 500 mm spindle cone: Gr. 11 number of feeds: 64 mm/U longitudinal feeds:: 0,04 -12 mm/U face feeds: 0,02 - 6 mm thread: 64 Stufen face slide travel: 315 mm upper slide-adjustment: 130 mm diameter of quill: 75 mm : MT5 quill stroke: MT5 mm total power requirement: 11 kW weight of the machine ca.: 3010 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1,5m, 2 m - 6 m.  ...

turning diameter over bed: 440 mm turning diameter over slide rest: 240 mm turning length: 5000 (1000 - 5000mm) mm spindle bore: 72 mm turning dia. in gap: 640 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 3500 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3900 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The  ...

turning diameter over bed: 580 mm turning diameter over slide rest: 380 mm turning length: 5000 (1000 - 5000 mm) mm spindle bore: 72 mm turning dia. in gap: 780 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3680 kg LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also ...

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1000 (1500 - 5000mm) mm spindle bore: 72 mm turning dia. in gap: 700 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 2950 kg LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also  ...

turning diameter over bed: 890 mm turning diameter over slide rest: 490 mm turning length: 6000 (1500 bis 6000) mm spindle bore: 155 mm turning dia. in gap: 1250 mm spindle turning speed range: 5 - 1000 U/min thread: 80 Stufen metric threading: 0,5 - 480 thread - module: 0,125 - 120 mm thread - inch: 60 - 1 1/16 inch. Whitworth-thread: 240 - 1/4 TPI bed width: 700 mm spindle cone: Gr. 15 longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm spindle cone MT: 160 face slide travel: 525 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MK 6 quill stroke: 260 mm total power requirement: 22 (0ption 30) kW weight of the machine ca.: ca. 9500 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available i ...

turning diameter over bed: 580 mm turning diameter over slide rest: 380 mm turning length: 4000 (1000 - 5000 mm) mm spindle bore: 72 mm turning dia. in gap: 780 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3480 kg LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also ...

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 5000 (1000 - 5000mm) mm spindle bore: 72 mm turning dia. in gap: 700 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3750 kg LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also  ...

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 2000 (1000 - 5000mm) mm spindle bore: 72 mm turning dia. in gap: 700 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3150 kg LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also  ...

turning diameter over bed: 890 mm turning diameter over slide rest: 490 mm turning length: 1500 (bis 6000) mm spindle bore: 155 mm turning dia. in gap: 1250 mm spindle turning speed range: 5 - 1000 U/min thread: 80 Stufen metric threading: 0,5 - 480 thread - module: 0,125 - 120 mm thread - inch: 60 - 1 1/16 inch. Whitworth-thread: 240 - 1/4 TPI bed width: 700 mm spindle cone: Gr. 15 longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm spindle cone MT: 160 face slide travel: 525 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MK 6 quill stroke: 260 mm total power requirement: 22 (0ption 30) kW weight of the machine ca.: ca. 5000 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Al ...

turning diameter over bed: 890 mm turning diameter over slide rest: 490 mm turning length: 5000 (1500 bis 6000) mm spindle bore: 155 mm turning dia. in gap: 1250 mm spindle turning speed range: 5 - 1000 U/min thread: 80 Stufen metric threading: 0,5 - 480 thread - module: 0,125 - 120 mm thread - inch: 60 - 1 1/16 inch. Whitworth-thread: 240 - 1/4 TPI bed width: 700 mm spindle cone: Gr. 15 longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm spindle cone MT: 160 face slide travel: 525 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MK 6 quill stroke: 260 mm total power requirement: 22 (0ption 30) kW weight of the machine ca.: ca. 9000 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available i ...

turning diameter over bed: 1320 mm turning diameter over slide rest: 940 mm turning length: 5000 (1500 bis 6000) mm spindle bore: 155 mm turning dia. in gap: 1500 mm spindle turning speed range: 5 - 1000 U/min thread: 80 Stufen metric threading: 0,5 - 480 mm thread - module: 0,125 - 120 mm thread - inch: 60 - 1/!16 inch. Whitworth-thread: 0,0625 - 60 TPI bed width: 700 mm spindle cone: Gr. 15 number of feeds: 160 mm/U longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm face slide travel: 685 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MT6 quill stroke: 250 mm total power requirement: 22 (30) kW weight of the machine ca.: ca. 10500 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also availabl ...

turning diameter over bed: 580 mm turning diameter over slide rest: 380 mm turning length: 2000 (1000 - 5000mm) mm spindle bore: 72 mm turning dia. in gap: 780 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3010 kg LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also  ...

turning diameter over bed: 1320 mm turning diameter over slide rest: 940 mm turning length: 1500 (bis 6000) mm spindle bore: 155 mm turning dia. in gap: 1500 mm spindle turning speed range: 5 - 1000 U/min metric threading: 0,5 - 480 mm thread: 80 Stufen thread - module: 0,125 - 120 mm thread - inch: 60 - 1/!16 inch. Whitworth-thread: 0,0625 - 60 TPI bed width: 700 mm spindle cone: Gr. 15 number of feeds: 160 mm/U longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm face slide travel: 685 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MT6 quill stroke: 250 mm total power requirement: 30 kW weight of the machine ca.: ca. 5000 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also  ...

turning diameter over bed: 1320 mm turning diameter over slide rest: 940 mm turning length: 3000 (1500 bis 6000) mm spindle bore: 155 mm turning dia. in gap: 1500 mm spindle turning speed range: 5 - 1000 U/min thread: 80 Stufen metric threading: 0,5 - 480 mm thread - module: 0,125 - 120 mm thread - inch: 60 - 1/!16 inch. Whitworth-thread: 0,0625 - 60 TPI bed width: 700 mm spindle cone: Gr. 15 number of feeds: 160 mm/U longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm face slide travel: 685 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MT6 quill stroke: 250 mm dimension: mm total power requirement: 22 (30) kW weight of the machine ca.: 8550 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also ...

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 3000 (1000 - 5000mm) mm spindle bore: 72 mm turning dia. in gap: 700 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3350 kg LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also  ...

turning diameter over bed: 1090 mm turning diameter over slide rest: 690 mm turning length: 3000 (1500 bis 6000) mm spindle bore: 155 mm turning dia. in gap: 1250 mm spindle turning speed range: 5 - 1000 U/min thread: 80 Stufen metric threading: 0,5 - 480 thread - module: 0,125 - 120 mm thread - inch: 60 - 1 1/16 inch. Whitworth-thread: 240 - 1/4 TPI bed width: 700 mm spindle cone: Gr. 15 number of feeds: 160 longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm face slide travel: 525 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MK 6 quill stroke: 260 mm total power requirement: 22 (0ption 30) kW weight of the machine ca.: 9000 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in:  ...

turning diameter over bed: 1320 mm turning diameter over slide rest: 940 mm turning length: 4000 (1500 bis 6000) mm spindle bore: 155 mm turning dia. in gap: 1500 mm spindle turning speed range: 5 - 1000 U/min metric threading: 0,5 - 480 mm thread: 80 Stufen thread - module: 0,125 - 120 mm thread - inch: 60 - 1/!16 inch. Whitworth-thread: 0,0625 - 60 TPI bed width: 700 mm spindle cone: Gr. 15 number of feeds: 160 mm/U longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm face slide travel: 685 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MT6 quill stroke: 250 mm total power requirement: 22 (30) kW weight of the machine ca.: ca. 9500 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available ...

turning diameter over bed: 580 mm turning diameter over slide rest: 380 mm turning length: 1000 (1500 - 5000mm) mm spindle bore: 72 mm turning dia. in gap: 780 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 2810 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 2800 kg LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also ...

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 4000 (1000 - 5000mm) mm spindle bore: 72 mm turning dia. in gap: 700 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3550 kg LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also  ...

turning diameter over bed: 1090 mm turning diameter over slide rest: 690 mm turning length: 6000 mm spindle bore: 155 mm turning dia. in gap: 1250 mm spindle turning speed range: 5 - 1000 U/min thread: 80 Stufen metric threading: 0,5 - 480 thread - module: 0,125 - 120 mm thread - inch: 60 - 1 1/16 inch. Whitworth-thread: 240 - 1/4 TPI bed width: 700 mm spindle cone: Gr. 15 number of feeds: 160 longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm face slide travel: 525 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MK 6 quill stroke: 260 mm total power requirement: 22 (0ption 30) kW weight of the machine ca.: ca. 10500 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also availa ...

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1500 (1000 - 5000mm) mm spindle bore: 72 mm turning dia. in gap: 700 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3150 kg LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also  ...

turning diameter over bed: 890 mm turning diameter over slide rest: 490 mm turning length: 3000 (1500 bis 6000) mm spindle bore: 155 mm turning dia. in gap: 1250 mm spindle turning speed range: 5 - 1000 U/min thread: 80 Stufen metric threading: 0,5 - 480 thread - module: 0,125 - 120 mm thread - inch: 60 - 1 1/16 inch. Whitworth-thread: 240 - 1/4 TPI bed width: 700 mm spindle cone: Gr. 15 longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm spindle cone MT: 160 face slide travel: 525 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MK 6 quill stroke: 260 mm total power requirement: 22 (0ption 30) kW weight of the machine ca.: ca. 7500 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available i ...

turning diameter over bed: 890 mm turning diameter over slide rest: 490 mm turning length: 4000 (1500 bis 6000) mm spindle bore: 155 mm turning dia. in gap: 1250 mm spindle turning speed range: 5 - 1000 U/min thread: 80 Stufen metric threading: 0,5 - 480 thread - module: 0,125 - 120 mm thread - inch: 60 - 1 1/16 inch. Whitworth-thread: 240 - 1/4 TPI bed width: 700 mm spindle cone: Gr. 15 longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm spindle cone MT: 160 face slide travel: 525 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MK 6 quill stroke: 260 mm total power requirement: 22 (0ption 30) kW weight of the machine ca.: ca. 8500 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available i ...

turning diameter over bed: 1090 mm turning diameter over slide rest: 690 mm turning length: 5000 (1500 bis 6000) mm spindle bore: 155 mm turning dia. in gap: 1250 mm spindle turning speed range: 5 - 1000 U/min thread: 80 Stufen metric threading: 0,5 - 480 thread - module: 0,125 - 120 mm thread - inch: 60 - 1 1/16 inch. Whitworth-thread: 240 - 1/4 TPI bed width: 700 mm spindle cone: Gr. 15 number of feeds: 160 longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm face slide travel: 525 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MK 6 quill stroke: 260 mm total power requirement: 22 (0ption 30) kW weight of the machine ca.: ca.9700 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available i ...

turning diameter over bed: 440 mm turning diameter over slide rest: 240 mm turning length: 4000 (1000 - 5000mm) mm spindle bore: 72 mm turning dia. in gap: 640 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 3500 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3700 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The  ...

turning diameter over bed: 440 mm turning diameter over slide rest: 240 mm turning length: 3000 (1000, 1500 -5000mm) mm spindle bore: 72 mm turning dia. in gap: 640 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 3500 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3500 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. ...