二手 WMW 出售

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Fucking size: Ø 200 m -Admission thread: M40 -Pitch: 1.5 mm -Rezess: Ø 180 mm -Weight: 22.5 kg

Quill for jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Stroke: 60 mm -in: a wooden box -Dimensions: 390/340/H170 mm -Weight: 15.8 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Interchangeable jaws: without -Thread: Ø 65 mm outside -Incline: 8 Gg/1 55 ° -Weight: 24 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 360 x 660 mm -T grooves: 8x 12 mm -rotatable: by hand with 4x fastening screws -swivelling: via crank -Movable: via crank 200 mm -Number: 1 piece available

Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, adapter sleeves -Manufacturer: WMW, adapter sleeves 10 pieces, with plastic box -Sizes: Ø 4-20 mm with wrench, see photos -Sale: only for sale as a whole -Dimension box: 260/330/H80 mm -Weight: 2.3 kg

Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, adapter sleeves -Manufacturer: WMW, adapter sleeves 12 pieces, with plastic box -Sizes: Ø 3-18 mm, see photos -Sale: only for sale as a whole -Dimension box: 260/330/H80 mm -Weight: 2.2 kg

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Beeks: soft -Chuck size: Ø 200 mm -Weight: 22 kg

Centrifugal quick-release chucks, centrifugal chucks, three-jaw chucks -Outer diameter: 155 mm -Clamping range: Ø 12-30 mm -Taper cone: Ø 82 mm -Hole circle: Ø 105 mm -Number: 2x feed available -Price: per piece -Weight: 6 kg/piece

Centrifugal quick-release chucks, three-jaw centrifugal chucks -Outer diameter: 155 mm -Clamping range: Ø 25-45 mm -aper cone: Ø 62 mm -Hole circle: Ø 82 mm -Number: 2x feed available -Price: per piece -Weight: 6 kg/piece

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-grooved plate comes: from a WMW boring mill -Travel: approx. 1200 mm -Mounting plate width: 1405 x 1250 mm -Dimensions: 2900/1350/H940 mm -Weight: approx. 1200 kg

Lamellar aprons, samurai aprons, machine protection, protective cover, bellows, protective cover system, protection system, guide protection, -Cover comes: from a WMW boring mill -for guide inside dimensions: 100 x 725 mm -Extractable: mm -Dimensions: 950/820/H150 mm -Weight: 30 kg

Three-jaw chuck, three-jaw lathe chuck -clamping plate -Chuck size: Ø 160 mm -Number: 2x feed available -Price: per piece -Weight: 7 kg

Boring head, spindle head, drill head, grooving head, grooving head, spindle drilling head, boring head, spindle tool -Spindle head: spindle tool for bench type boring mill, plate type boring mill, tilt adjustable -Stroke: 225mm -Shaft: Ø 50 mm -Dimensions: 330/170/H415 mm -Weight: 48kg

Tool holder, milling holder, milling tool -Number: 3x SK50 holders -2x diameter: 40 x 630 mm -1x diameter: 32 x 630 mm -Sale: only complete -Weight: 44 kg

Machine vise, sturdy vise, drill vise -Jaw width: 170 mm -Clamping depth: max. 120 mm -Dimensions: 480/170/H130 mm -Weight: 30 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, tapping chuck holder MK2 -Type: A2 MK2 -Bore: Ø 13 mm -Dimensions: Ø 70 x 267 mm -Weight: 3.3 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, tapping chuck holder MK2 -Type: A2 MK2 -Bore: Ø 12 mm -Dimensions: Ø 70 x 267 mm -Weight: 3.3 kg

Tool holder, milling holder, milling tool -Number: 58x SK40 mounts -different designs -partly with pull studs -Spindle tools: different diameters -Sale: only complete -Weight: 108 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 400 x 600 mm -T grooves:groove width 12 mm -rotatable -tiltable and swiveling via cranks -fits for Deckel Mikron WMW and other milling machines -Weight: 200 kg -Number: 1x available -Price: per piece

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -hard: interchangeable jaws -Base plate for: machine table -Passage: Ø 54 mm -Weight: 22 kg

Bezel, stick, lynette -Max. Passage: Ø 65 mm -Tip height: 83 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 250/280/H65 mm -Weight: 6 kg

Profile steel shears, hand lever shears, hand sheet metal shears, sheet metal shears, sheet metal shears -Scissors: 185 mm -cutting: 40 mm angle iron -cutting: Ø mm round steel -Dimensions: 460/985/H2220 mm -Weight: 88 kg

Internal micrometers, micrometer screw, internal diameter, internal precision measuring device, cylinder gauge, -Measuring range: 35-60mm -Dimensions: 115/450/H60 mm -Weight 1.6kg

Thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: WMW thread rolling machine type UPW25X100Rm -Drive: 7.5 kW 955 rpm -Speed: 450 - 2025 rpm -Rolling force continuously adjustable: from 0 to 25 tons -built-in thread roller: pitch 1.5 mm -Dimensions: 1570/1510/H1800 mm -Weight: 3500 kg

Tapping chucks, thread chucks, tapping chucks, milling tools, tapping attachments -Manufacturer: WMW, thread cutting chuck mount MK3 -Types: GB3 -Dimension: Ø 80 x 270 mm -Weight: 3.7 kg

Bezel, stick, lynette -Transfer in current condition as seen -Max. Passage: Ø 260 mm -Tip height: 370 mm -without: quills -Technical drawing: in the photos -Dimensions: 680/135/H830 mm -Weight: 92 kg

Bezel, stick, lynette -Max. Passage: Ø 212 mm -Tip height: 319 mm -Edition: gray cast iron -Technical drawing: in the photos -Dimensions: 610/120/H650 mm -Weight: 59 kg

Bezel, steady rest, lynette -steady rest: from lathe WMW DLZ 800 -Max. Passage: Ø 260 mm -Tip height: 495 mm -Technical drawing: in the photos -Dimensions: 670/130 / H785 mm -Weight: 98 kg

Moving bezel, moving bezel, bezel, steady rest, lynette -Bezel. traveling, from a WMW DLZ 800 lathe -Max. Passage: Ø 210 mm -Technical drawing: in the photos -Dimensions: 440/430 / H700 mm -Weight: 66 kg

Shell end mills, shell mills, milling cutters -Number: 8 pieces finishing cutter/roughing cutter -Socket: Ø 40 mm -Various diameters: 120-125 mm -Different producers -Price: complete -Weight: 22 kg

Shell end mills, shell mills, milling cutters -Number: 18 pieces finishing cutter/roughing cutter -Socket: Ø 40 mm -Various diameters: 100-125 mm -Different producers -Price: complete -Weight: 57.6 kg

Shell end mills, shell mills, milling cutters -Number: 9 pieces finishing cutter/roughing cutter -Socket: Ø 32 mm -Various diameters: 76-100 mm -Different producers -Price: complete -Weight: 13.3 kg

Shell end mills, shell mills, milling cutters -Number: 28 pieces finishing cutter/roughing cutter -Socket: Ø 22 mm -Various diameters: 49-80 mm -Different producers -Price: complete -Weight: 10.5 kg

Shell end mills, shell mills, milling cutters -Number: 12 pieces finishing cutter/roughing cutter -Socket: Ø 32 mm -Various diameters: 75-110 mm -Different producers -Price: complete -Weight: 21.3 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table, clamping rail, guide rail, support rail -Clamping table: Clamping rail with T-slot -Length: 1300mm -Groove width: 14 mm, dimensions see photo techn. drawing -Dimension.: 1300/150/H45 mm -Weight: 37 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Take: Ø 32 -Tension sleeves: 4/6/10/12/14 mm -Weight: 1 kg

Collet collet sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Collet holders: Ø 1x12/2x18/2x20 mm -Weight: 1 kg

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 250 mm -Rezess: Ø 230 mm -Hole circle: Ø 200 mm -Number: 2x available -Price: per piece -Weight: 35 kg

Shell end mills, shell mills, milling cutters -Outer diameter: 200/H60 mm -Tooth: 12 -Number: 1x available -Price: per piece -Weight: 9 kg

Tool holder, milling holder, milling tool -Number: 2x SK45 holders -1x recording inside: Ø 28 mm -1x recording outside: Ø 40 mm -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 4.5 kg

Tool holder, milling holder, milling tool -Number: 2x SK45 holders -Inside mount: Ø 36 x 90 mm -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 5.4 kg

Machine vice, vice, drill press vice -Jaw width: 160 mm -Back height: 50 mm -Clamping depth: max. 105 mm -Dimensions: 460/163/H123 mm -Weight: 38.3 kg

Tapping chucks, thread chucks, tapping chucks -Transfer in current condition as seen -Threading chucks without collets -with slip clutch -Cutting capacity: M24-M64 -Recording: MK5 -Number: 1x tapping chucks available -Weight: 13 kg

Dividing head, spiral milling device, dividing head, dividing attachment, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Part head -Distance between centers: 450 mm -Take: SK40 -suitable for: milling cutter grinding -Translation: 1:40 -swiveling -Weight: 60 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Adjustment: SK50 -without adapter sleeves -Manufacturer: WMW -Type: size 25 -Weight: 3 kg

Drill press, drill press, stand drill, pillar drill -Manufacturer: WMW, column drilling machine type CM 10S/55 -Motor: 630 W -Speeds: 460 - 2190 rpm -Translation: via V-belt -Table size: 220 x 280 mm -spindle taper: MK1 -Spindle stroke: 70 mm -Projection: 200 mm -Pillar Ø: 85 mm -Dimensions: 400/800/H1670 mm -Weight 206 kg

Automatic drill, drill press, drill press, stand drill, pillar drill -Spindle mount: MK 3 -Transmission -Automatic drill: with rapid traverse -Automatic drilling -Threading: automatic -Table size: 450 x 360 mm -Projection: 285 mm -Spindle stroke: 150 mm -Speed: 180-2000 rpm -Feed: 0.08-0.32 mm/rev -Dimensions: 900/1000/H2100 mm -Weight: 840 kg

turning diameter over bed: 400 mm turning diameter over slide rest: 200 mm turning length: 1500 mm turning diameter in the gap: mm turning speeds: 28 - 1400 U/min centre height: 200 mm spindle bore: 50 mm total power requirement: 10,4 kW weight of the machine ca.: 2,85 t dimensions of the machine ca.: 3,5 x 1,4 x 1,6 m Center lathe - Rapid traverse - Faceplate 400mm - Multifix steel holder - Coolant system - Feed protection - chip trays - Chip protection wall - Emergency stop facility - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

钢孔能力（直径）： 50 mm 喉部： 365 mm 孔冲程： 200 mm 锥度 MK： 4 MK 工作台尺寸： 660 mm 进给： 贾毫米/U 车削速度： 63 - 1000 U /min 总功率要求： 2，3 KW 机器重量 约： 0，95 t 尺寸： 1，2 x 0，8 x 2，46 m

grinding length: max. 630 mm grinding width: max. 200 mm workpiece height: . mm x-axis: max. 250 mm y-axis: max. 710 mm distance spindle center to table: max. 500 mm table surface area: 0,25 mm table load: max. 1,1 t table speed -stepless-: 2 - 18 m/min cross feed autom.: . dust exhaust: 0,25 kW coolant pump: 0,09 kW total power requirement: ca. 4,5 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: 2400 x 1600 x 1900 mm Adjustments Y axis: 1 scale value = 0.005 mm Z axis: 1 scale value = 0.002 mm Manual adjustment (within the range of 250 mm of the Y axis): 80 mm Speeds: automatic cross feed Adjustment path in Y direction: - intermittent 0.2 - 20 mm per stroke, - continuous: 0 - 4 m/min Grinding wheel Ø max. 200 mm Grinding wheel bore: 51 mm Grinding wheel width: 20 mm Diamond dressing unit Digitaldisplay for 2 advertisement vertical infeed The data for this ad was cr ...