二手 WMW 出售

压缩力：40 t 投影： 250 mm 工作台尺寸： 440 x 530 mm 表中腹泻： 170 毫米 工作台调整： 220 mm 柱塞面积： 200 x 280 mm 挺杆调节： 60 mm 行程调整： 8 - 80 mm 行程速率：100次/分钟 驱动电机：380 V，2.5 kW 空间要求：950 x 1450 x 2050 mm 重量： 2400 kg

可用长度 2，000 mm 低碳钢的最大板材厚度 2.5 mm 上梁开口宽度 250 mm 弯曲梁的驱动功率 5.5 kW

C型框架压力机 功率：3音 安装高度： 355 mm 行程： 280 mm 冲击速度：0.1米/秒 机器重量：400公斤 原产国 德�

配有可拆卸�

品牌： WMW 年： 1988 型号： SI4 应用类型：研磨 位置： 德国 机器类型：磨床 可用性：立即 技术信息 一般数据 尺寸宽度： 2200 MM 测量深度： 1400 MM 测量高度： 2000 MM 机器重量： 5300 KG 主驱动器 主轴转速范围： 11 500 - 29 000 1/MIN 其他信息 机器优势 技术机器优势： - 回转直径： 315 / 450 MM - 磨削深度： 200 MM - 锥度磨削可达：60度 - 磨削直径 - 内径：最小/最大 5 / 200 MM - 工作台行程： 5 -560 MM - Z轴快速移动：工作台 12 M/MIN - 进纸路径：最多 0 个表。8 无级 MM - 砂轮尺寸：80 X 宽 80 MM - 工作台摆动行程： 5 - 185 MM - 摆动速度： 0. 5 - 6 M/MIN 定性机器优势： - 双冲程/分钟：200分钟 - 滑块调节行程： 168 MM - 进给速度：0.02-16 MM/MIN - 总功率要求：约14。0 KW -  ...

DP 800 饰面车�

一、工作能力 -面板直径 2000 毫米 -工件最大直径 2200 mm -工件最大高度： -在横轨下 1850 毫米 -工件最大重量 20 吨 二、活动横轨： - 立柱行程 1600 mm - 快速移动速度400毫米/分钟 - 慢速移动速度 10 毫米/分钟 III.面板主驱动在转弯模式下。 -主驱动电机功率 60 kW -面板速度范围 250 转/分钟 四、工作支持： -冲压行程 （Z 轴） 1500mm -冲压件截面 250x250 mm -冲压/锥度 ISO 50 -刀库，刀具编号 16（左刀库带铣刀，右刀库带车削刀具或混合刀） -铣削轴驱动电机功率 37 kW -最多一个刀柄重量 30-70 公斤 -铣削主轴转速 1 - 2000 转/分钟 五、饲料 -X，Z 轴工作进给 1 – 6.000 mm -C – 轴进给（面板铣削模式）0，001 + 2，7 转/分钟 -快速进给 10.000 毫米/分钟 六、总体尺寸（信息� ...

品牌：威马威 年份： 2008 型号： BP 160 数控 应用类型：镗孔 位置： 韩国 机床类型：镗床 可用性：立即 技术信息 控制单元 品牌：西门子 型号： 840D 主驱动器 主轴转速范围： 4 - 2500 1/分钟 主轴电机功率： 100 KW 刀具锥度：ISO 50 运动 X 轴运动：11000 MM Y 轴运动：5000 MM Z轴运动：1200毫米 V轴运动：2000毫米 W 轴运动：1000 MM 附加信息 机器优势 技术机器优势： - 最大主轴扭矩 12，000NM - 镗杆直径 160 - 内存部分 500 X 620MM - 进给速度为X，Y轴15，000MM/分钟 - Z轴进给速度，W轴6，000MM/分钟 - 转台尺寸 2，500 X 2，500MM - 转台承载能力40吨 - 楼板尺寸 6，000 X 6，000MM - 附件 U-TRONIC / 2 轴头 / 角头 / 柱塞�

turning diameter over bed:630 mm turning diameter over slide rest:360 mm turning length:2000 mm spindle speeds::22,5 - 1120 centre distance:2500 mm feeds - cross:0,018 - 1,25 mm/U spindle motor:15 kW total power requirement:18 kW weight of the machine ca.:6,0 t dimensions of the machine ca.:3,6 x 1,4 x 1,7 m - Heidenhain digital readout - rapid traverse - Multifix quick tool change with inserts - faceplate - 2 steaday rests, 3-jaw chuck - splash protection

bore capacity in steel (diameter):10 mm throat:210 mm bore stroke:100 mm total power requirement:0,7 kW weight of the machine ca.:302 kg dimensions of the machine ca.: 620 x 800 x 1950 mm Table dimensions:350 x 250 mm spindle speeds::250, 355, 710, 1000, 1400, 2000, 2500 U/min

bore capacity in steel (diameter):10 mm throat:210 mm bore stroke:80 mm total power requirement:1,1 kW weight of the machine ca.:195 kg dimensions of the machine ca.:530 x 650 x 1850 mm spindle speeds::355, 710, 1400, 2800 U/min Table dimensions:340 x 280 mm

x-travel:850 mm y-travel:280 mm z-travel:355 mm total power requirement:8 kW weight of the machine ca.:4 t dimensions of the machine ca.:2 x 2 x2.40 m revolutions per minute: 28-1.400 U/min table-size:1.200 x 370 mm surface area:1.060 x 260 mm spindle taper:SK 50

pressure:10 t stroke:400 mm total power requirement:1,6 kW weight of the machine ca.:1,1 t dimensions of the machine ca.:1100 x650 x 2050 mm dayligth:500 mm table-size:400 x 450 mm Documents:vorhanden

grinding length:1000 mm grinding width:250 mm workpiece height:400 mm total power requirement:12 kW weight of the machine ca.:3,8 t dimensions of the machine ca.:3.300 x 1.800 x 2.300 mm hydraulic power unit:400 x1000 x 1500 mm control cabinet:2 Stück, 1000 x 1400 x 1500 mm

total power requirement:12 kW weight of the machine ca.:4,6 t

turning diameter over bed:630 mm turning diameter over slide rest:360 mm turning length:2000 mm centre distance:2500 mm spindle turning speed range:22,5 - 1120 U/min spindle motor:15 kW feeds - cross:0,018 - 1,25 mm/U weight of the machine ca.:6,0 t total power requirement:19 kW dimensions of the machine ca.:4,0 x 1,4 x 1,6 m Machine equiped with: - Heidenhain digital readout - 2 steady rests - rapid traverse - 3-jaw chuck, faceplate - splash cover - Multifix rapid tool changing system

max. workpiece diameter:160 mm min. workpiece diameter:20 mm workpiece length:3300 mm Sawn round material sections are clamped using prismatic hydraulic clamps left and right, and in one operation the two front surfaces can be milled to length and machined with a center hole and/or thread.

bore capacity in steel (diameter):40 mm arm length:1250 mm workpiece height max.:1390 mm Dist. spindle nose & working surface base:350 - 1260 Spindle travel:315 max. boring diameter:40 mm Distance between spindle axis and column:350 - 1260 spindle taper:4 MK Range of spindle speeds:22,4 - 2800 Number of spindle speeds:16 Number of spindle feeds:16 Table:500 x 630 Travel of spindle head:900 mm total power requirement:3,5 kW dimensions of the machine ca.:2150x1070x2840 m feed:0,09 - 1,5 m/min weight of the machine ca.:3 t

turning diameter:1600 mm turning length:12000 mm control:FAGOR 8050 Used CNC Lathe with FAGOR 8050 and extensive accessories. For further technical data and accessories, pls browse the Appendix. Parallellathe WMW mod. 4 GUIDE-WAYS ¦ CNC: FAGOR 8050 ¦ bed: monolithic ¦ centres height: 800 mm ¦ centres distance: 12000 mm ¦ swing over cross-slide: 1250 mm ¦ turret: automatic 4 positions ¦ tailstock: motorized ¦ tailstock connection: hydraulic ¦ platform: diam. 1000 mm ¦ steady rests: nr.02 ¦ chip conveyor Warranty: none Take advantage of the favorable leasing and hire-purchase terms from IKB Leasing. Ask us about it.

Description: pillar drilling machine Drilling capacity in steel 50 mm Projection 365 mm Drill stroke 200 mm Recording MK 4 MK Table size 660 mm Feeds yes mm/rev Speed 63 - 1000 rpm Total power requirement 2.3 KW Machine weight approx. 0.95 t Dimensions L x W x H 1.2 x 0.8 x 2.46 m weight approx.: 950 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,460 mm

Description: Center lathe - Rapid traverse - Faceplate 400mm - Multifix steel holder - Coolant system - Feed protection - chip trays - Chip protection wall - Emergency stop facility - Machine light Turning diameter over bed 400 mm Turning diameter over support 200 mm Turning length 1500 mm Speed 28 - 1400 rpm Center height 200 mm Spindle bore 50 mm Total power requirement 10.4 kW Machine weight approx. 2.85 t Space requirement approx. 3.5 x 1.4 x 1.6 m weight approx.: 2,850 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 1,400 x 1,600 mm

Description: Connected load 8.9 kW , Nominal current of the machine 19.6 A Table dimensions 1900 x 450 mm Approx. Onsite Dimension. (l x w x h): 2,150 x 1,100 x 2,450 mm, weight approx.: 3,000 kg

Description: Fabrication number 330290 Diameter of grinding wheel approx. 200 mm Including existing documentation magnetic plate size: 600x205 mm, weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 1,300 x 1,900 mm

Tool holder, milling holder, milling tool -Number: 9x SK30 mount -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -with transport box -is only sold complete -Weight: 10 kg

Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe -Manufacturer: WMW, automatic lathe type DRT 50m -Turning length: 550 mm -Turning Ø over bed: 530 mm -Spindle bore: Ø 63 mm -Spindle speeds: 9 - 450 rpm -Three jaw chuck: Ø 200 mm -Turret: with accessories, see photos -Drive motor: 5.3 / 6.8 kW -Dimensions: 2420/1040 / H1460 mm -Weight: 2200 kg

Quick clamping device, hydraulic clamping device, electrohydraulic clamping device, clamping drive, motorized clamping device -Manufacturer: WMW, electric clamping drive -Type: EDU I 80 -Motor: VEM 0.55kW -Shaft: Ø22/18 x 101 mm, see photo -Dimensions: 300/137/H170 mm -Weight: 16 kg

Crimping pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end ferrules, wire end ferrules, cable lugs, manual crimping pliers -Manufacturer: WMW, manual crimping tool type PH 2.5C -Pressing: of cable lugs and cable connectors -Pressing force: 25.0 N -Press path: 15 mm -Transport case: including accessories, see photo -Number: 4x pressing pliers available -Price per piece -Dimensions tongs: 600/180/H25 mm -Weight compl.: 3,2kg/St

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: milling machine table -Table surface: 400 x 600 mm -T grooves: groove width 14 mm, groove spacing 50 mm -rotatable. by hand with 6x fastening screws -can be tilted and swivelled: via cranks -fits for Deckel Mikron WMW and other milling machines -Total dimensions: 700/600/H345 mm -Weight: 198 kg

Shell end milling cutters, milling cutters, milling cutters, shell milling cutters -Manufacturer: WMW, shell milling cutter, shell end milling cutter type N 9960 -Size: 160x63x50mm -Receptacle: Ø 50 mm -Dimensions of box: 175/175/H100 mm -Weight: 5.9 kg

Machine vice, vice, drill press vice -Jaw width: 155 mm -Back height: 80 mm Clamping depth: max. 200 mm -Dimensions: mm -Weight: 35 kg

Shell cutters, shell cutters, milling cutters, shell-type milling cutters -Manufacturer: WMW, shell mill -Inside: Ø 32/14 mm -Dimension: Ø 96 x 47 mm -Weight: 1.5 kg

Milling machine, universal milling machine, tool milling machine -Clamping table: 1600 x 400 mm -Travel: X/ Y/Z 1100/400/400 mm -electric tool clamping: -Spindle mount: SK50 -Quill stroke: 100 mm -Speeds: from 28 to 1400 rpm -Coolant device: -Dimensions: 2100/2320/H2700 mm -Weight: 4000 kg

Tool holder, milling holder, milling tool -Number: 7x SK40 mounts with tool carrier -Executions: different -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills -Sale: only complete -Dimensions: 590/120/H210 mm -Weight: 12 kg

Counter holder, counter bearing, bearing block, pillow block bearing, bearing for milling machine, horizontal milling machine -Manufacturer: WMW, counter bearing from milling machine FW 400 x 1600 -Dimensions: see the drawing in the photos -Transport dimensions: 1505/400/H345 mm -Weight: 370kg

live center, live center, live morse taper, live center, live lathe center, live center -Manufacturer: WMW, live center 2 pieces -Type: ZN 205 -Intake: MK5 -Price/delivery: complete -Total dimensions: 270/190/100 mm -Weight: 10kg

Quick clamping device, hydraulic clamping device, electro-hydraulic clamping device, clamping drive, motor clamping device -Manufacturer: WMW, electrical clamping drive from milling machine FW 400 x 1600 -Type: EDU I 80 HDR EK IH -Motor: VEM 0.55 kW -Shaft: Ø 30 x 100 mm -Dimensions: 465/185 / H238 mm -Weight: 23 kg

Tool holder, milling holder, milling tool, long milling arbor -5x recordings: SK50 -3x diameter: Ø 40 x 1010 mm -1x diameter: Ø 32 x 1000 mm -1x diameter: Ø 27 x 830 mm -Sale: only complete -Weight: 109kg

Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch thread: 1/2 - 3/4 inch -Weight: 6 kg

Fan head, chamber ventilator, dorade ventilator, mushroom ventilator, ship ventilator, deck ventilator, ventilation, mushroom hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, multi-leaf damper, non-return damper, lamellar ventilator, mushroom hood -Manufacturer: WMW, fan head type MTK DN 150 GL 37081-86 HH -Bolt circle Ø 238 x 22 mm -Number: 1x hood available -Price per piece -Total dimensions: 310/200/H290 mm -Weight: 35 kg/pc.

Fan head, chamber ventilator, dorade ventilator, mushroom ventilator, ship ventilator, deck ventilator, ventilation, mushroom hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, multi-leaf damper, non-return damper, lamellar ventilator, mushroom hood -Manufacturer: WMW, fan head type MTK DN 80 GL 37081-86 HH -Flange: DIN 2576 ND10-NW80/88 -Bolt circle Ø 160 x 18 mm -Number: 5x hood available -Price per piece -Total dimensions: 310/200/H290 mm -Weight: 12.2 kg/pc.

Fan head, chamber ventilator, dorade ventilator, mushroom ventilator, ship ventilator, deck ventilator, ventilation, mushroom hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, multi-leaf damper, non-return damper, lamellar ventilator, mushroom hood -Manufacturer: WMW, fan head type MTK DN 65 GL 37081-86 HH -Flange: DIN 2576 ND10-NW65/76 -Bolt circle Ø 143 x 18 mm -Number: 2x hood available -Price per piece -Total dimensions: 280/185/H255 mm -Weight: 9 kg/pc.

Mushroom hood for ventilation, ventilation duct, ventilation flap, ventilation system, exhaust system, ventilation ducts and fittings, multi-leaf damper, non-return damper, lamellar fan, mushroom hood -Manufacturer: WMW, fan head type MTK DN 40 GL 37081-86 HH -Bolt circle Ø 110 x 18 mm -Number: 1x hood available -Price per piece -Total dimensions: 220/140/H220 mm -Weight: 5,4 kg/pc.

Fan head, chamber ventilator, dorade ventilator, mushroom ventilator, ship ventilator, deck ventilator, ventilation, mushroom hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, multi-leaf damper, non-return damper, lamellar ventilator, mushroom hood -Manufacturer: WMW, fan head type MTK DN 50 GL 37081-86 HH -Flange: DIN 2576 ND10-NW50/60 -Bolt circle Ø 126 x 18 mm -Number: 8x hood available -Price per piece -Total dimensions: 230/165/H225 mm -Weight: 6.5 kg/pc.

Tool holder, milling holder, milling tool -Quantity: 4x recording SK40 -1x Ø: 16 x 19 mm -1x Ø: 16 x 25 mm -1x Ø: 27 x 25 mm -1x: drill chuck - is only sold complete -Weight: 6kg

Bezel, stick, lynette -Max. Passage: Ø 210 mm -Tip height: 390 mm -Technical drawing: in the photos -Dimensions: 600/125/H625 mm -Weight: 53.5 kg

Compulsory mixer, agitator, mixer, mixing tool, stirrer -Nominal consumption: 1050 watts -Connection: 230 volts -Speed: 230 rpm -Dimensions: 1000/520/H130 mm -Weight: 10 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Admission thread: M20 -Pitch: 2.5 mm -Weight: 32 kg

Thread cutting head, thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, self-opening thread cutting heads type A2 13 pieces -Size: M16 x 1.75 recording MK3 2 pieces -Size: M10 x 1.5 1 piece -Size: Ø 17 mm 10 pieces -Price/tax: complete -Transport dimensions: 400/250/H270 mm -Weight: 22 kg

Crimping pliers, crimping pliers, cable lug pliers, mechanical crimping pliers -for: large cable lugs, hoses -to: 60 mm² -Number: 8x hand pressing teeth available -Price: per piece -Dimensions: 650/220/H45 mm -Weight: 8 kg