二手 SCM 出售

制造商： SCM ， 年份： 大约 1995， 控制： 手， 型材主轴数： 1， 示踪剂： 是， 最大工作高度 mm： 50， 主轴行程范围总 mm： 110， 铣削主轴数： 1， 铣削主轴 kW： 约.1，5， 铣削机转速： 10000/20000， 网格深度设置： 是， 表中的示踪剂引脚： 是， 工作台数量： 1， 工作台尺寸 mm： 7700 X 900， 免费文本： Tischub 每手拉 200 毫米/肺浮游， 年份 ：约 1995 �

制造商： 单片机， 类型： Routomat 3 ， 年份： 1994， 控制： scm， 工件宽度 最小-最大 mm： 2500 X 1400， 工作范围 X： 2500， 工作范围 Y 轴： 1400， 工作范围 Z： 约 350， C 轴： 是， 工件宽度最小-最大 mm： 2500 X 1400， 铣削主轴数： 1， 刀具适配器系统： ISO 30， 铣削发动机 1 小时功率： 7，5， 下午： 1500-18000， 下午： 1500-18000， 安扎尔·沃克泽格韦希斯勒： 1， 每个刀库的刀具数量： 6， 阿鲁-格莱蒂施： 阿鲁·努蒂施， 刀具夹紧系统： vakuum， 免费文本： C-Achse muss überholt werden Preis 约 3000 欧元， 年份 ：1994

制造商： 单片机， 类型： P64， 年份： 1988， 刨削宽度： 180， 刨削高度 mm： 105， 主轴数： 4， 主轴最大旋转.rpm： 6000， 每主轴独立发动机： 否， 主机 kW： 4， 全悬挂式驱动进给： 是， 进给 - kW： 2，5， 进给速度连续可调： 是， Tischlänge mm： 2000， 调整 - 电气化： 否， 隔音外壳： 是， 压缩空气条： 是的，怀特约公斤： 2000， 年份 ：1988

制造商： 单片机， 类型： 记录 130， 年份： 2001， 控制： 数， 工作范围 X： 3080， 工作范围 Y 轴： 1200， 工作范围 Z： 280， 铣削主轴数： 1， 刀具适配器系统： HSK 63， 铣床 1 小时功率： 约.9， 转速 1）： 9000-18000， 换刀装置数量： 1， 每个刀库的刀具数量： 12， 米特弗伦德-魏克希斯勒： 是， 真空泵 m³/h： 120， 年份 ：2001

制造商： 单片机， 类型： P64， 年份： 1988， 刨削宽度： 180， 刨削高度 mm： 105， 主轴数： 4， 主轴最大旋转.rpm： 6000， 每主轴独立发动机： 否， 主机 kW： 4， 全悬挂式驱动进给： 是， 进给 - kW： 2，5， 进给速度连续可调： 是， Tischlänge mm： 2000， 调整 - 电气化： 否， 隔音外壳： 是， 压缩空气条： 是的，怀特约公斤： 2000， 年份 ：1988

制造商： 单片机， 类型： 记录 100 AL XL TVN， 年份： 2010， 工作范围 X： 3110， 工作范围 Y 轴： 1240， 进料速度 最大米/分钟： X=60， Y=45， Z=30， 工作台数量： 1， 横移台： 是， 真空泵 m³/h： 250， 锯机单元： 是， 杂志数量： 12， 年份 ：2010

Description: Control system: SCM XILIA 900 Spindles bottom: 2 Spindles right: 1 Spindles left:1 Spindles top:1 Universal spindle: Yes Spindle speed: max. 6,000 rpm Main motor: 11 kW Pre-dressing cutter: Yes Separate motor per spindle: No Motorized adjustment: Planing height & width Infeed table length: 2,500 mm Table rollers: driven Lubricant pump: automatic Top pressure: pneumatic Infeed roller: cycled Feed rate: max. 24 m/min Feed: infinitely variable Feed rate: 3 kW Feed roller drive: Gear wheel Constant feed: Yes planing width: 230 mm, planing height: 120 mm, number of spindles: 6 pieces, spindle: u-r-l-o-u-uni, spindle diameter: 40 mm, total power: 40 kW, Approx. Onsite Dimension. (l x w x h): 4.500 x 2.100 x 1.700 mm, weight approx.: 3.750 kg

Description: MACHINE DESCRIPTION WILL BE UPDATED & AMENDED if necessary 10.40.06 - European safety regulations (C.E. mark) 01.08.47 - Olimpic S 1000 - 'T-ERS' version (61) Basic equipment Ribbed steel machine stand with tubular reinforcements for optimum work unit support Pivoting control panel Support roller track with ball bushing guide along the entire length of the machine Protective hood with sound-absorbing material, complete with interior lighting for the cabin and gluing area Extraction nozzle arranged on the sound-absorbing hood Electrical system with lockable main switch and thermomagnetic motor protection switch Emergency/off button in the infeed and outfeed inverter 93.07.31 - Volt 400 EU 93.12.01 - Frequency 50 Hz 62.11.07 - Preparation for barcode reader allows the subsequent connection of a barcode reader in order to integrate the machine into the  ...

Description: Nesting table with table size 4,750 x 1,200 mm, electrospindle with HSK63F tool holder, 12-place tool magazine TOMASSINI Automatic panel magazine with suction cup loader, storage space 8,800 x 4,000 mm serial number: AA1/013639, Approx. Onsite Dimension. (l x w x h): 13,800 x 8,000 x 4,800 mm, weight approx.: 10,000 kg

Description: Max. panel width 900 mm Max forward speed 48 mt/min Number of shafts 1 Motor Power 18.5 KW Max. cutting height 110 mm Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Description: Max. panel width 4500 mm Max. panel length 3200 mm Main saw blade projection 90 mm No of Grippers 8 Max. saw blade projection 90 mm Front support tables yes no. tables 4 Grippers on pusher fence yes No. grippers 8 Max. forward feed speed 12 m/min Saw Carriage 1 SAW CARRIAGE 1 Saw Unit : yes motor power : 7.5 KW Scoring unit : yes motor power : 1.5 KW Max. forward feed speed : 27 m/min Safety standard CE mark yes Total installed power 22 KW Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Description: SCM Record 110 Al Prisma CNC Machine Specifications: Brand: SCM Model: Record 110 Al Prisma Year of Construction: 2010 Number of Axes: 5 Drilling Unit: Yes Groove Saw: Yes Tool Magazine: Yes Pods, Rails, and Clamps: Yes Safety Mats: Yes x-motion: 3,060 mm, y-motion: 1,240 mm, Approx. Onsite Dimension. (l x w x h): 6,200 x 3,800 x 2,400 mm, weight approx.: 4,000 kg

Description: serial number AA10002739 X axis working area 3115 mm Y axis working area 1320 mm pendulum workpiece length 1400 mm workpiece passage Y 1600 mm workpiece passage Z 180 mm flat type. Bar type machine type cantilever beam X-Y rack transmission air intake speed 25m/s centralized suction conveyor diameter 250 mm diameter of suction conveyor exiting the belt 120 mm suction consumption during work 5450 m3/h compressed air pressure 6.5 bar average compressed air consumption 300NL/min Pro-space” axis vector speed 56.00 m/min drilling head: type F23L RO.AX (13 vert., 6X+4Y horiz., X blade) 5-axis electrospindle: power - rpm (max) (S1-S6) 10/13.5 kW (13.6/18.4 HP) - 24,000 rpm 5-axis electrospindle: cooling - connection Liquid-cooled - HSK63F maximum installed current (400V) 56.30 A 38.90 KVA for futher technical detail please consult document ,PDF M 100.pd ...

Description: serial number AB00022204 Max. panel length mm 3.050 min. panel length mm 200, Max. panel width mm 900 min. panel width mm 80, Max. panel thickness mm 60 min. panel thickness mm 10 max. X axis speed m/min 40, Max.Y axis speed m/min 40 vertical spindles - drilling head F14L (vers. P/PR) no. 8 (5X-3Y) - drilling head F23L (vers.P F23/PR F23) no. 13 (7X – 6Y) horizontal spindles - drilling head F14L (vers. P/PR) no. 6 (2+2X-1+1Y) - drilling head F23L (vers.P F23/PR F23 no. 10 (3+3X-2+2Y) rotating spindles motor power kW (Hp) 2,2 (3) spindle speed rpm 4.200 fixed integrated disc cutter (direction) X max. diameter of disc cutter mm 125 disc cutter rotating speed rpm 5.500 ELECTROSPINDLE motor power KW (Hp) 5,5 min./max. speed rpm 1.000/18.000 tool changer manual max tool diameter mm 20 for futher technical detail please consult document ,PDF STARTE ...

Description: serial number AH00004035 variable track feed speed 12-18m/min panel thickness 8-60 mm thickness of edges in strips 0,4-8 mm thickness of rolled edges 0,4-3 mm max. section of rolled edges 135 mm² coil-holder plate diameter 780 mm distance between two successive panels 600 mm minimum panel length (100 mm min. width) 140 mm min. length of edge in rolls 180 mm min. length of edge in strips 220 mm min. panel width (210 mm min. length) (with unit adjustment modification) 60 mm opening for panel support roller 560 mm worktable height 900 mm Betriebsspannung 400 V, 3 phases, 50 Hz nennstrom 29A leistung 10 kA for futher technical detail please consult document ,PDF - OLIMPIC K 560 R PS 7.pdf serial number: AH00004035, Approx. Onsite Dimension. (l x w x h): 5,000 x 1,300 x 1,900 mm, weight approx.: 1,900 kg

Description: serial number AH00004898 track feed speed 11 m/min panel thickness 8-60 mm thickness of edges in strips 0,3-6mm thickness of rolled edges 0,3-3 mm max. section of rolled edges 135 mm² coil-holder plate diameter 780 mm exceeding material to the panel thickness 2+2 distance between two successive panels 600 mm minimum panel length (100 mm min. width) 140 mm min. length of edge in rolls 180 mm min. length of edge in strips 220 mm min. panel width (210 mm min. length) 90 mm opening for panel support roller 500 mm worktable height 900 mm Betriebsspannung 400 V, 3 phases, 50 Hz nennstrom 29A leistung 10 kA for futher technical detail please consult document PDF - OLIMPIC K 360 HP.pdf  , serial number: AH00004898, Approx. Onsite Dimension. (l x w x h): 4,800 x 1,300 x 1,800 mm, weight approx.: 1,400 kg

Description: Max. machinable height 120 mm Maximum machinable width 230 mm Lined sliding table yes Max. forward feed speed 25 m/min Operator shafts number 5 Min. machinable height 6 mm Maximum machinable height 120 mm Min. machinable length 620 mm Min. machinable width 25 mm Maximum machinable width 230 mm Lined sliding table yes Max. forward feed speed 25 m/min Forward feed wheels yes Operator units 5 OPERATOR UNITS 1 Cutting shaft : bottom shaft diameter : 40 mm shaft length : 250 mm max. tool diameter : 200 mm Motor power : 7.5 KW OPERATOR UNITS 2 Cutting shaft : Right shaft diameter : 40 mm shaft length : 195 mm max. tool diameter : 200 mm Motor power : 7.5 KW OPERATOR UNITS 3 Cutting shaft : left shaft diameter : 40 mm shaft length : 195 mm max. tool diameter : 200 mm with positioning from NC : yes Motor power : 11 KW OPERATOR UNITS 4 Cutting shaft : top shaft diameter : 40 mm shaft ...

Description: Max. panel height 50 mm Min. edge thickness 0.4 mm Max. edge thickness 5 mm Max. forward feed speed 12 m/min Pressure with idle wheels NO. PANEL SIZING / MILLING UNITS , Unit : pre-milling unit automatic timed intervention motor power : 1.8 KW Edge coil magazine yes glue pot for EVA hot melt glue , premelter for EVA hot melt glue , Roller set to press the edge , no. pressure roller 4 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.35 KW NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming no. motors : 2 motor power : 0.65 KW NO. EDGE PROCESSING UNITS 3 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 0.65 KW NO. EDGE PROCESSING UNITS 4 Processing Unit : Corner rounding no. motors : 2 motor power : 0.5 KW NO. EDGE PROCESSING UNITS 5 Processing Unit : edge scraping NO ...

Description: serial number AA1/014869 min. piece length mm 230 max. piece length mm 3100 min. piece thickness mm 3 max. piece thickness mm 100 working height from the floor mm 920 movable beam positioning speed m/min 2 feed speed of chain tracks m/min 4-24 Betriebsspannung 400 V, 3 phases, 50 Hz nennstrom 163 A leistung 10 kA for futher technical detail please consult document PDF Concept NT.mod.pdf Approx. Onsite Dimension. (l x w x h): 5,000 x 4,000 x 2,000 mm, weight approx.: 6,800 kg

Description: SCM RECORD 220 CNC Machining Center 3 axis changing units - yes control - Num drilling spindels horizontal y-axis - yes drilling spindels vertical x-axis - yes drilling spindles horizontal x-axis - yes drilling spindles vertical y-axis - yes edge gluing unit - no Integrated C-axis - no Nesting machining - Flat table aluminium Number of vacuum pumps ,- 1 path-feed rate max. X-axis - 60 mts/min path-feed rate max. Y-axis - 60 mts/min path-feed rate max. Z-axis - 30 mts/min saw unit - no working height z-axis - 2500 mm working length x-axis - 1000 mm working width y-axis - 250 mm working width y-axis: 250 mm, working height z-axis: 2,500 mm, working length x-axis: 1,000 mm, Number of vacuum pumps: 1 pieces, Integrated C-axis: No, Nesting machining: Yes, path-feed rate max. X-axis: 60 m/min, path-feed rate max. Y-axis: 60 m/min, path-feed rate max. Z-axi ...

Description: Max panel size 3050x800x50 mm Min panel size 300x90x10 mm Maximum speed of X-Y axes m/min 25 Vertical spindles n.7 (4X+3Y) Horizontal spindles along Y/X axis n.2 (1+1) 1 Blade, diameter/thickness mm 100/5 Motor power kW (hp) 1.5 (2) Spindle/blade rotation speed rpm 3350/4300 Installed power kVA 4.5 Approx. Onsite Dimension. (l x w x h): 1,950 x 1,650 x 1,150 mm, weight approx.: 2,500 kg

Description: Max panel size: 1525 x 1525 mm Working table height from ground: 950 mm Table - tool clearance: 320 mm Clearance between uprights: 3450 mm Vacuum Pump capacity 100 mc/h Pump power (50 Hz): 3 kW (4 HP) Synchronisation by cnc of the 'X' and 'Y' strokes of the work tables for workpieces of the same size. Electrospindle - tool holder attachment: ISO 30 Spindle speed: 900 - 18.000 rpm Spindle power (at 12,000 rpm): 7.5 kW (10HP) Tool changer positions: 10 Maximum tool weight: 4.5 kg Maximum weight on tool changer: 30 kg Diameter of suction ports: Ø 150 mm  , working length x-axis: 1,525 mm, working width y-axis: 1,525 mm, x-motion: 3,700 mm, y-motion: 1,600 mm, z-motion: 300 mm, path-feed rate max. X-axis: 60 m/min, path-feed rate max. Y-axis: 60 m/min, path-feed rate max. Z-axis: 25 m/min, vacuum pump: 100 m³/h, Approx. Onsite Dimension. (l x w x h): 0 x 0 x 0 mm, weight a ...

Description: Diameter disc: 360 mm - unverified. Thickness: 3.2 mm cutting length: 1,360 mm, cutting width: 800 mm, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,700 x 1,600 mm, weight approx.: 300 kg

Description: Serial Number: KK00018498 Type: B04 Max. working width: 2 mm max. board thickness 50 mm , Minimum board dimensions: 180x65 mm , Feed speed 6 m/min Machine with gluing unit Saw for cross-cutting Profiling unit Machine equipped with PLC Approx. Onsite Dimension. (l x w x h): 2,500 x 1,500 x 1,500 mm, weight approx.: 300 kg

jointer planer, dresser, flat planer, planer, jointer -Manufacturer: SCM surface planer type F4L -Working width: 400 mm -Number of knives: 4 pieces -Chip removal: 0 - 10 mm -Motor: 3 kW -Planer knife speed: 5500 rpm -Table: 2605 x 400 mm -Dimensions: 870/2605/H980 mm -Weight: 695kg

SCM 冷却装置，尺寸：760 mm x 900 mm x 1050 mm�

SCM冷却装置带3个风扇，型号：MCCV / B2 / 01，制造年份：2016，总尺寸：2800 mm x 1100 mm x 2000 mm�

SCM冷却装置带3个风扇，型号：MCCV / B2 / 01，制造年份：2016，总尺寸：2800 mm x 1100 mm x 2000 mm�

工作宽度： 410 mm 刨床长度： 2.200 mm 刀具数量：5 St.Motor 输出功率： 5 kW 机器重量 ca.： ca. 411 kg ： Tersa ： Ja 吸尘罩： 120 mm 转弯速度： 5.000 U/min

工作宽度： 410 mm 刨床长度： 2.600 mm 刀具数量： 4 St. 电机输出功率： 4 kW 尺寸（长/宽/高）： 2.600 x 1.400 x 1.200 mm 机器重量约： 561 kg ： Tersa ： Ja

工作宽度： 520 mm 工作高度： 240 mm 电机输出功率： 7 kW 刀数： 4 St. 进给速度： 5/8/12/16 米/分钟 机器重量 约： 约 500 kg ： 泰尔萨 ： 贾 吸尘罩： 120 mm

工作宽度： 520 mm 工作高度： 300 / 3,5 mm 电机输出功率： 7 kW 刀具数量： 4 St. 进给速度： 5/8/12/18 m/min. 机器重量约：680 kg 吸尘罩：150 mm ：Tersa 车削速度：4.500 U/min

锯片可耕作： 45 滚动工作台长度： 3.200 mm 切割宽度： 1.270 mm 电机输出功率： 5.5 kW 切割高度： 约 103 mm mm 锯片直径： 350 mm 速度： 4.000 U/min. 机器重量 ca.： ca. 800 kg： Ja ： Ja

Number of spindles: 6 St. Working width: 240 mm Working height: 120 mm Dimensions (L/W/H): 4900 x 1700 x 1700 mm weight of the machine ca.: 3500 kg Control: CNC SCM SUPERSET NTE 31 PLUS automatic profile milling machine with 6 shafts 14 axis control with touch screen - WINDOW VERSION Machine with 6 spindles Spindle speed 8,300 rpm Working width 240 mm, working height 120 mm Electronic horizontal and vertical positioning of the spindles Glazing bead cutting Touchscreen controls Detailed technical description, see adjacent PDF documents. Suction nozzle diameter: 1. Spindle down: 120mm 2nd spindle right: 120 mm 3. Left spindle: 120 mm 4. Spindle top: 150mm 5. Spindle top: 150mm 6. Spindle below: 120mm Option: workpiece return to the operator Images are from our archive of a machine of the same model. (Technical information according to the manufacturer - without guarantee!) The data for t ...

Workpiece dimensions: , mm Total length: 5500mm mm Feed speed: 37 m/min. Workpiece return RP-S NT --------------------------------- Return device with tubular steel construction with high resistance to guarantee of robustness and solidity over time. A powered conveyor belt for the Workpiece transport to the operator. The conveyor belt is equipped with brakes equipped with wheels. 9 rolls processing width 220 mm Length 2500mm adjustable height 900 mm Roller diameter 60 mm with adjustable Inclination 0°-15°, variable center distance, at least 200 mm Unloading chute depth 900 mm 9 inclined idler roller aggregates with adjustable width and variable center distance from at least 200 mm Driven belt with a width of 300 mm Length 5500mm Motor 0.37 KW speed 37 m/min --------------------------------- (Technical information according to the manufacturer - without guarantee! The data for this ad ...

Max. workpiece height: 280mm, tool cone: HSK 63F, weight: 6.5t, an inspection is possible.

Throat depth: 915mm, spindle stroke: 110mm, table stroke: 200mm, max. opening between table and spindle: 310mm, controls: FAGOR, length: 905mm, width: 1550mm, height: 1700mm, weight: 648kg.

X-travel: 3680mm, y-travel: 2040mm, z-travel: 1000mm, number of drilling spindles: 9, number of tool slots: 32, weight: 6.5t, operational hours counter: ca. 33,000h, the machine is slightly damaged.

Length: 2600mm, width: 685mm, height: 1000mm, weight: 840kg.

隔音桌唇----------技术 参数---------- 刨宽度：400毫米， 工作台长度：2600毫米， 刀数：4件 ;返回页首！经过车间测试，可立即使�

Saw blade adjustable 90° - 45°

equipped with foot control,

Equipped with cabinet with stock belt, glue, 2x HBM mobile moth extraction with flexible tube.

equipped with EUROPA 340 feeder; including shims

Equipped with an angled edge guide

SCM Topset XL planing and molding machine for four-sided planing and profiling of wood with CNC-controlled spindles and SCM T-Set quick release nuts., working width: 240 mm, working height: 120 mm, spindles: 7, spindle 1: Bottom / 7.5 kW / 8,300 rpm, spindle 2: Right / 11 kW / 8,300 rpm, spindle 3: Left / 11 kW / 8,300 rpm / CNC, spindle 4: Right / 11 kW / 8,300 rpm / CNC/, spindle 5: Top / 11 kW / 8,300 rpm / CNC, spindle 6: Below / 7.5 kW / 8,300 rpm / CNC), spindle 7: Universal / 7.5 kW / 8,300 rpm, feed: 5,5 kW, control: Control 100 PC Plus, table rollers: Driven table roller in the outlet, spindle diameter: 40 mm

可根据要求提供技术数据。用于自行拆卸和收集�

A description of the machine: RECORD 125 NESTING CNC machining centre with loading and unloading for milling, cutting, clearing, drilling, etc. The machine for sale has recently been taken out of service. It is in good working order. A twin machine can be seen on site, only the spindle is different between the two machines. Model RECORD 125 NESTING Power supply 400V - 50/60 Hz X-Y-Z axis travel 3700x1720x400mm X-Y-Z axis speed up to 80-55-22m/mn Real part passage (light) 335(310)mm OSAI system Water-cooled ELECTROMANDRIN power supply Electromandrel 6.6kW 24000rpm (no angular gear heads) Magasin Rapide12 - HSK 63 12-position automatic tool magazine 2 Becker 250m3 dry vane vacuum pumps Multiple chuck drilling head Movable control panel NUM1040PC control unit with Xilog Plus and Telesolve 3 safety mats Mesh protection perimeter Automatic slide lubrication Our in-stoc ...

Green SCM brand multiblade sold used but with virtually new motor and gears as it was purchased new but never operated.