Edgebander SCM Olimpic S 1000
二手机
Description: MACHINE DESCRIPTION WILL BE UPDATED & AMENDED
if necessary 10.40.06 - European safety
regulations (C.E. mark) 01.08.47 - Olimpic S
1000 - 'T-ERS' version (61) Basic
equipment - Ribbed steel machine stand with
tubular reinforcements for optimum work unit support
- Pivoting
control panel
- Support roller track with ball bushing guide
along the entire length of the machine
- Protective hood with
sound-absorbing material, complete with interior lighting for the
cabin and gluing area
- Extraction nozzle arranged on the
sound-absorbing hood
- Electrical system with lockable main
switch and thermomagnetic motor protection switch
- Emergency/off button in the infeed and outfeed
- inverter
93.07.31 - Volt 400 EU
93.12.01 - Frequency 50 Hz 62.11.07
- Preparation for barcode reader allows the subsequent
connection of a barcode reader in order to integrate the machine into
the 'Net-Line' cell. 62.12.26 -
'iTouch' for ERL / T-ERL / T-ERS versions
Allows all necessary adjustments to be made from the control panel
during each machining change. - Pneumatic and independent
tilting of the cross-cut saw blades S624454 (front / rear)
- 2
pneumatic working positions for the cross-cut unit (with/without
material overhang)
- Pneumatic remote adjustment for the flush
trimming unit
- 2 pneumatic working positions on the Round SK
unit
 , 62.10.57 - Feeding aid for narrow
workpieces Device to facilitate the right-angled loading
of narrow workpieces. This fixture protrudes approx. 150 mm above the
machine stand and is easily removable. - Min. panel thickness
12 mm
- Min. panel width 220 mm
- Panel length 135 -
40
seller offer No. resale 909406
|