Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Punching machine manufacturer: Müller, single-column eccentric press type PDE30SLFHK -Pressure capacity: 30 tons -Stroke: adjustable 80mm -Stroke rate: 80-380 strokes/min -Table size: 800 x 420 mm -Table recess: 340 x 205 mm -Projection: 220 mm -Punching fixture: Ø 40 mm -Insertion height 395 mm -Roller feed manufacturer: ALBA type EVS200/0.1 -Feed/stroke: from 0.1 - 6500 mm -Material width: from 10 - 200 mm -Material thickness: from 0.5 - 2.0 mm -Punching device: incl. 4 column punching tool Matocapco MOR, see photos -Dimensions: 1650/1920/H2300mm, 420/1000/H980mm, 700/600/H1050mm -Total weight: approx. 3200 kg
压力:100 t 投影:300 mm 行程:10-100 mm 行程速率:80 行程/分钟 滑棒调整:60 mm 工作台面:900x600 mm Ram 区域:800x230 mm 工作台内腹泻开口:300x200 mm 柱塞中的针孔:50 mm 机器重量约:4.0 t 空间要求约:1700x1500x2700 mm 旋转楔形接头 手动润滑 滑枕 中的机械断裂 板 脚控制 仅批准用于安全工具 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。
pressure: 80 t throat: 280 mm stroke: 10-100 mm no. of strokes: 85 Hub/min ram - range of adjustment: 60 mm table surface area: 820x530 mm ram surface: 260x210 mm hole in the table: Ø 120 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 285 mm stroke: 10-100 mm no. of strokes: 65 Hub/min ram - range of adjustment: 60 mm table surface area: 850x640 mm ram surface: 420x210 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,2 t dimensions of the machine ca.: BxTxH 2500x2500x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 060 t throat: 280 mm stroke: 140 mm table-size: 750 x 520 mm Strole of rum/minute: 100 ram adjustable: 55 mm stroke adjustable from - to: 10 - 140 mm mould space: 340 mm hole in the table: 230 x 175 mm table adjustable: 220 mm tool hole in ram: 40 mm total power requirement: 2,95 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 1,5 x 1,2 x 2,4 m Condition: ready for operation: Video(s) available on our website.: Electric 380 Volt: Foot switch: adjustable table: Single column eccentric press with rotary wedge coupling, adjustable table, stroke + ram and flywheel drive. Approved only for safe tools and solid ones shields! Last test according to the test report July 2022: Everything is OK. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
压力:160 t 投影:350 mm 行程:20-140 mm 刀具滑块厚度:40-60 冲程/分钟 挺杆调整:75 mm 总功率要求:15 kW 机器重量 约:10 t 空间要求约:m 序列号 20279 技术数据是制造商或操作员的规格,因此对我们 无约束力。我们保留进行事先销售的权利,我们的业 和销售条款和条件仅适用 。 关于我们 超过400台自有机器在仓库 超过8500平方米的存储区域,起重机容量70吨 以上超过1000件配件为您的车间 如果您想出售机器生产线或您的公司, 请与我们联系。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。
pressure: 160 t throat: 360 mm stroke: 560 mm total power requirement: 33 kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: 2000x2400x3650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 45 t throat: 230 mm stroke: 4 - 80 mm strokes per minute: 120 table surface area: 690 x 460 mm ram surface: 360 x 185 mm ram adjustment: 55 mm daylight, max. stroke above - ram adjustment above: 340 mm total power requirement: 3 kW weight of the machine ca.: 2,95 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
压力: 63 t 投影: 280 mm 行程: 160 mm 工作台面: 560 x 500 mm Ram 面积: 280 x 280 mm 安装高度: 400 mm 油容量: 约 360 l 总功率要求: 22 kW 机器重量 约: 4 t 空间要求 约: 1.45 x 1.75 x 2.67 m - 带 Sick 光栅 的工作空间外壳- 带顶出器和销夹件 的大型柱塞- 脚踏开关 - 气缸 内电动深度停止装置该广告的数据是使用模态MWS创建 - 标识科技oHG的机器管理。
压力:100 t 投影:320 mm 行程:160 mm 工作台面:850 x 550 mm 安装高度:500 mm 油容量:约 500 l 冲压面积:560 x 450 mm 总功率要求:30 kW 机器重量约:6.5 t 空间要求约:1.5 x 2.0 x 3.0 m 机器于 2008 年进行了大修 -带 Sick 光栅 的工作空间外壳-带顶出器和销夹件 的大型柱塞该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。
pressure: 75 t throat: 290 mm stroke: 12 - 100 mm ram adjustment: 80 mm no. of strokes: 140 Hub/min table surface area: 830 x 560 mm ram surface: 630 x 300 mm total power requirement: kW weight of the machine ca.: 6,1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
压力:40 吨 支架宽度:600 毫米 行程:160 毫米 安装高度:360 毫米 工作台尺寸:560 x 400 毫米 柱塞孔:40 H 7 DIN 810 毫米 油含量:500 l 返回速度:200 毫米/秒 模垫液压。压力/行程: 60 顶出力: 25 t 总功率要求: 15 kW 空间要求 约: 1.44 x 0.95 x 2.54 m 压制速度: 27 mm/sec 返回速度: 200 mm/min 含氢.模具缓冲速度: 快速前进速度240 mm / s无 级可调 本广告的数据是用ModulMWS创建的 - LogoTech oHG的机器管理。
Pressing force: 100t, throat depth: 300mm, stroke speed: 60/min, stroke adjustment: 10-100mm, motor power: 7,5hp.
Max. ram force: 1600kN, length: 3170mm, width: 2500mm, height: 5080mm, weight: 23t, with documentation.
Max. working width: 2000mm, min. cutting width: 10mm, core diameter: 76/ 152mm, circular knife diameter: 100mm, max. wall thickness: 10mm, with documentation, the machine was hardly used.
Equipped with stepless speed controller; digital tachometer; electric 2 speeds; belt grinding block; Can be used for wood, plastic, metal