二手 MÜLLER 出售

编号 ： 6682 型号： PDE 100 RF-HK 导演： 穆勒 创建时间：2000年 参数： 控制系统：西门子SIMATIC 压缩力： 1000 kN 行程长度： 330 mm 每分钟最大冲程速率：55 1/分钟 柱塞调整： 100 mm 主机功率：11 kW 机器高度： 2600 mm 机器长度： 2200 mm 机器宽度： 2000 mm 机器重量： 7500 kg 设备： 技术文�

供应信息 24163 技术参数约： - 压缩力 135 t - 投影 350 mm - 工作台尺寸 1000 x 680 毫米 - 工作台上的通孔 mm - 最大安装高度约 460 毫米 - 柱塞面积 350 x 280 mm - 带横向悬臂，左 + 右，125 x 200 mm - 柱塞上的榫孔 50 mm - 柱塞可调性 65 mm - 行程调整 20 - 180 mm - 大约每搏率 50 /分钟 - 可移动屏蔽，1991年改装 - 肺。驱动旋转楔形联轴器 - 驱动 400 V / 7.5 kW - 大约需要空间 宽 1500 x 高 2550 x 深 1800 mm - 重量约 9000 千�

4 台 MüLLER 提花针织机，用于标签和装饰，带有编织软边，由以� ��部分组成： 1 MÜLLER MVC2 型 200 14/36 768/448,1998 年，塔夫绸机 1 MÜLLER型MVC 200 15/30,1995年，缎面机 1 MÜLLER MVC 200 20/20 型，1994 年，缎面机 1 MÜLLER MVC 150 8/46 型，1991 年，缎面�

1台LCFR2型穆勒标签切割和折叠机，2017�

1 MÜLLER 喷气式标签织机 MÜJET 2S 型 MBJL 2S 115，规格 SPE5 1536/1152 T， 10-2001年，2002年投产， 塔费塔机器， 8 色，740 转/分， MÜDATA 300， 机器配有 3 台送纬机、1 支经梁、1 支布辊、20 台热敏切割�

规格： - 压缩力 60 t - 投影 350 mm - 桌子大小约 900 x 600 毫米 - 工作台高度可调 - 腹泻洞在表约 300 x 200 毫米 - 最大安装高度约为 360 毫米 - 大约是斯托尔塞莱什 340 x 160 毫米 - 插头上的锥孔 40 mm - 插头可调节性 60 mm - 行程调整 10 - 90 mm - 行程速率 110 1/分钟 - 2 手动操作 - 气动连接 6 巴 - 飞轮驱动/速度无级可调 - 旋转楔形联轴器 - 驱动功率 400 V / 5.5 kW - 空间要求约为 宽 2000 x 高 2200 x 深 2400 mm - 重量约 4500公斤 - 机械夹进给 MABU 型 ZPL 11 带 3 辊矫直�

穆勒牛奶冷却罐 型号： RHS200 型号： 31886 800L不锈钢罐，RHS牛奶冷却器设计用于少量牛奶，R12制 冷剂，顶部安装的搅拌器，也可用于加热流体或简单� ��保持隔离和温/冷�

卧式带锯 / 穆勒 HBS 230G /斜切 Cjkvx8b8yz 带滚筒输送机前/后 切割区域 - 约 230mm 切割面积 - 方形 230x230mm 切割区域 - 平面/纵向 250x230mm 切割区域 - 平/平 280x170mm 在 45 度斜接时约 175mm 在45度正方形165x165mm 45度/平面/纵向145x230mm 在45度/平面175x170mm 60度/斜接圆170mm 在60度/方形90x90mm 在60度/托盘/纵向90x90mm 在60度/平面110x80mm 主机/功率1，1 KW 速度范围 30 - 60 米/分钟 带锯片尺寸 2700x27x0，9mm 尺寸： 长x宽x高 1400x800x1500mm 重量约300Kg

查询号码 390298 机器类型：穆勒磨刀机 UR4-4 工作范围线材和棒材：Ø 4 至 Ø 22 mm / 管材：Ø 4 至 Ø 44 mm 制作海因里希·穆勒（Heinrich Müller），型号：旋转捏合机UR4-4 建设年份 2004 地点： 索林根 原产地：德国 交货时间：立即可�

新机器 用于加工：木材，塑料，PVC，玻璃钢，有机玻璃，有� ��金属，如铝，黄铜等。 规格： 分辨率：0.0018毫米 X-Y-Z 精密梯形螺纹主轴 12x3 mm 所有驱动主轴均为 3 倍无间隙滚珠轴承 表大小： 约 506 毫米 x 320 毫米 移动距离： x 约 215 毫米， y 约 375 毫米， 例如约 90 毫米 通道约 78 毫米 价格和其他尺寸可根据要求提�

数控雕刻机 穆勒LCF - 2 行程： X 375 毫米 Y 570 毫米 Z 90 毫米 技术0.321020121002 数据： 工作台尺寸 700 mm x 480 mm 重量： 50 千克 外形尺寸： 长度： 700 mm 宽度： 500 mm 高度： 350 mm 辅料： 计算机 屏幕 键盘 鼠 软件 控制 克雷斯铣刀 真空泵 阀门喷雾雾 参考资料夹头和铣刀 - �

规格： 容量 300 至 冲程率 35 冲程 柱塞宽度 1000 mm 投影 450 mm 柱塞行程 20 - 140 mm 柱塞调节 80 mm 发动机功率 30 马力 重量粗略估计18�

液压单机架拉丝机Müller型号CLZ.100.1.34，建于1994年，� �况良好，带UVV，西门子S7屏幕控制，投影400毫米，安� ��高度800毫米，工作台表面800 x 730毫米，行程600毫米，模具垫40至，模具垫行程200毫� ��

编号 2753 缪勒 MS16 HFV 建造年份/年份 1999 约。3900小时/小时 3.5 吨 振动器，带液压装置 MS-A360V，夹具 MSU140 钢板桩和 30 m 液压软管 振动器，带液压动力装置 MS-A360V，夹具 MSU140 钢板桩和 30 m 液压软�

机器类型：偏心压力机 制造商： MÜLLER 型号： Amp 100 建设年份：1967 条件：非常好 报价类型： 二手机器 规格： 压缩力： 100 t 投影： 310 mm 工作台： 910 x 600 mm 安装高度： 410 mm 行程： 10 – 100 mm 推进力： 5.5 kW 备注： 气动双手和脚驱动， 每分钟 80 次冲程， 柱塞调节 60 mm， 可调冲床， 附加冲孔板 890 x 595 x 85 mm 重量： 5300 kg 该机器状况非常好，可以立即使用，我们可以查看和� ��示。 如果您对我们的报价感兴趣，我们将非常高兴。 错误、修改和事先销售除外�

链茎穆勒 墙 长 x 宽 x 高： 60 x 40 x 170 厘米 重量约 270 kg 建造年份 1973 机器状况良好，可随时投入运行。 可能会有变化，错误，事先销售！ 服务/备件由 MATEC CH-4900 朗根塔尔/DE-79618 莱茵费尔登 马泰克系统+技术有限公司 机械工程 艾森巴街 25 CH-4900 朗根塔尔/瑞士 电话 0041 62 966 18 32 传真： 0041 62 966 21 12

穆勒标签织机（二手） 型号 MBJ3 2007年 提花 1152 钩 5800 纱线。 机器上的附件： - 6台送纬机 2 梁 2个布辊 新线束 滴管。

液压机400吨 额定功率 400 吨 滑动行程 800 mm 滑块尺寸 1300 x 1600 mm 工作台尺寸 1300 x 1600 mm 缓冲行程 350 mm . 电气系统于2020年完全重�

pressure:100 t distance between columns:1060 mm stroke:700 mm distance table/ram, max. stroke up, adjustment up:1250 mm table surface area:1000 x 700 mm pressure of drawing cushion in table:40 t stroke of drawing cushion in table:200 mm die cushion area:Ø 250 mm table height over floor:950 mm side window:580 x 750 mm ram surface:1000 x 700 mm oil volume:700 l power requirement:47,0 kW weight:13,0 t Dimensions (WxDxH):2,2 x 1,8 x 5,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:mechanical; motoric adjustable ram interlocking:SITEMA

pressure:315 t distance between columns:1620 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1000 mm table surface area:1600 x 1100 mm pressure of drawing cushion in ram:20 t stroke of drawing cushion in ram:100 mm drawing cushion area in ram:300 x 300 mm side window:600 x 1100 mm table height over floor:750 mm ram surface:1600 x 1100 mm oil volume:1500 l power requirement:110,0 kW weight:35,0 t dimensions (WxDxH):4,65 x 2,61 x 5,5 m height over floor:5,05 m height beneath floor:0,45 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in ram:hydraulic ram interlocking:pneumatic cutting impact cushioning:hydraulic

pressure:250 t distance between columns:1110 mm stroke:250 mm Distance table/ram, max. stroke up, adjustment up:500 mm Table surface area:1100 x 900 mm Table height above floor:950 mm Side window:690 mm Ram surface:1100 x 900 mm Oil volume:730 l Power capacity:56,0 kW Dimensions (WxDxH):2,3 x 1,55 x 3,96 m

pressure:2000 t distance between columns:975 mm stroke:400 mm distance table/ram, max. stroke up, adjustment up:1000 mm table surface area:1015 x 1050 mm table height over floor:800 mm capacity of ejector in table:6,3 t ejector stroke in table:100 mm capacity of ejector in ram:65 t ejector stroke in ram:100 mm ram surface:975 x 1050 mm return capacity:150 t speed down:235 mm/s speed up:250 mm/s working speed:5 - 20 mm/s oil volume:4000 l height over floor:3,65 m height beneath floor:3,75 m power requirement:194,0 kW weight:105,0 t dimensions (WxDxH):5,0 x 6,5 x 7,4 m

pressure:160 t throat:500 mm stroke:200 mm distance table/ram, max. stroke up, adjustment up:500 mm table surface area:1140 x 980 mm hole in the table:180 mm table height over floor:860 mm ram surface:1000 x 800 mm oil volume:1000 l power requirement:50,0 kW weight:18,0 t dimensions (WxDxH):1,3 x 2,6 x 3,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:mechanical cutting impact cushioning:hydraulic

pressure:200 t distance between columns:1100 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1100 mm table surface area:1000 x 1000 mm pressure of drawing cushion in table:63 t stroke of drawing cushion in table:250 mm die cushion area:800 x 750 mm table height over floor:800 mm ram surface:1000 x 1000 mm Speed down:400 mm/s speed up:250 mm/s working speed:22 - 56 mm/s power requirement:45,0 kW weight:24,0 t dimensions (WxDxH):2,4 x 1,5 x 5,9 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic

pressure:63 t throat:325 mm stroke:560 mm distance table/ram, max. stroke up, adjustment up:700 mm table surface area:640 x 640 mm pressure of drawing cushion in table:25 t stroke of drawing cushion in table:200 mm die cushion area:450 x 450 mm table height over floor:800 mm ram surface:560 x 560 mm oil volume:450 l power requirement:15,0 kW weight:7,0 t dimensions (WxDxH):1,2 x 2,0 x 3,1 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic

pressure:100 t throat:320 mm stroke:160 mm distance table/ram, max. stroke up, adjustment up:480 mm table surface area:630 x 550 mm hole in the table:200 mm table height over floor:860 mm ram surface:560 x 450 mm oil volume:500 l power requirement:30,5 kW weight:6,4 t dimensions (WxDxH):1,6 x 2,0 x 2,9 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact cushioning:hydraulic depth stop:mechanical

pressure:500 t distance between columns:1220 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1000 mm table surface area:1600 x 1200 mm pressure of drawing cushion in table:320 t stroke of drawing cushion in table:150 mm drawing cushion surface in table:750 x 625 mm pressure of drawing cushion in ram:180 t stroke of drawing cushion in ram:100 mm drawing cushion area in ram:750 x 625 mm ram surface:1600 x 1200 mm table height over floor:800 mm speed down:665 mm/s speed up:530 mm/s working speed:34 - 100 mm/s quantity of oil:2000 l power requirement:180,0 kW weight:40,0 t Dimensions (WxDxH):3,2 x 2,4 x 7,5 m Depth of foundation pit:4,1 m Height above floor:5,55 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

pressure:63 t throat:280 mm stroke:160 mm Distance table/ram, max. stroke up, adjustment up:360 mm table surface area:560 x 490 mm hole in the table:125 mm table height above floor:860 mm ram surface:280 x 280 mm power requirement:22,0 kW weight:3,6 t dimensions (W x D x H):0,8 x 1,7 x 2,8 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

pressure:315 t distance between columns:1750 mm stroke:700 mm distance table/ram, max. stroke up, adjustment up:1200 mm table surface area:1600 x 1500 mm pressure of drawing cushion in table:125 t stroke of drawing cushion in table:200 mm die cushion area:1200 x 1400 mm table height over floor:750 mm ram surface:1640 x 1500 mm power requirement:55,0 + 11,0 kW weight:29,5 t dimensions (WxDxH):3,2 x 4,5 x 5,8 m Height above floor:5,1 m German Safety: permitted for manual loading:CE-Norm - EN 692, BGR 500 drawing cushion in table:hydraulisch cutting impact absorption:hydraulic

pressure:315 t distance between columns:1800 mm stroke:400 mm Distance table/ram, max. stroke up, adjustment up:650 mm table surface area:1800 x 1000 mm table height over floor:900 mm die cushion pressure in table:80 t die cushion stroke in table:100 mm Die cushion area in table:1300 x 600 mm side window:600 mm ram surface:1800 x 1000 mm speed down:400 mm/s speed up:300 mm/s working speed:15 - 80 mm/s oil volume:1700 l power requirement:55,0 kW weight:27,5 t dimensions (WxDxH):3,1 x 2,2 x 4,6 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 die cushion in table:hydraulic foundation pit:not necessary

Pressure:1000 t distance between columns:4100 mm stroke:1200 mm Distance table/ram, stroke up:2100 mm Table surface area:4000 x 2200 mm pressure of drawing cushion in table:360 t Die cushion stroke in table:300 mm Die cushion area in table:3500 x 1600 mm Die cushion pressure in ram:100 t Die cushion stroke in ram:160 mm Die cushion area in ram:3250 x 1600 mm Ram surface:4000 x 2200 mm Side window:1300 mm Oil volume:8000 l Power capacity:300,0 kW Dimensions (WxDxH):5,75 x 4,3 x 9,55 m Height above floor:7,7 m die cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable cutting impact cushioning:hydraulic

Pressure:1600 t distance between columns:4100 mm slide stroke:1450 mm Distance table/ram, stroke up:2750 mm distance table/blank holder, stroke up:2200 Table surface area:4000 x 2200 mm ram pressure:1000 t Pressure of blank holder:600 t stroke of blankholder:1000 mm blank holder surface:4050 x 2200 mm Ram surface:3200 x 1650 mm pressure of drawing cushion in table:360 t Die cushion stroke in table:300 mm die cushion area:3500 x 1600 mm Side window:1100 mm Oil volume:9000 l Power capacity:390,0 kW Weight:250,0 t Dimensions (WxDxH):5,95 x 4,3 x 10,5 m Height above floor:8,6 m die cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable

Pressure:800 t distance between columns:3250 mm stroke:1100 mm Distance table/ram, stroke up:1900 mm Table surface area:3100 x 1900 mm pressure of drawing cushion in table:300 t Die cushion stroke in table:300 mm Die cushion area in table:2500 x 1800 mm Die cushion pressure in ram:80 t Die cushion stroke in ram:200 mm Die cushion area in ram:2200 x 1000 mm Ram surface:3100 x 1900 mm Side window:900 mm Oil volume:4700 l Power capacity:200,0 kW Dimensions (WxDxH):4,95 x 3,3 x 10,2 m Height above floor:7,05 m die cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable cutting impact absorption:hydraulic

Pressure:800 t distance between columns:2560 mm stroke:1050 mm Distance table/ram, stroke up:1870 mm Table surface area:2500 x 1730 mm pressure of drawing cushion in table:300 t Die cushion stroke in table:395 mm Die cushion area in table:2300 x 1300 mm Ram surface:2500 x 1730 mm Die cushion pressure in ram:63 t Die cushion stroke in ram:150 mm Side window:1000 mm Oil volume:4300 l Power capacity:200,0 kW Dimensions (WxDxH):4,1 x 2,8 x 10,0 m Height above floor:7,0 m die cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable

Pressure:600 t distance between columns:2600 mm stroke:900 mm Distance table/ram, max. stroke up, adjustment up:1600 mm Table surface area:2500 x 1730 mm pressure of drawing cushion in table:250 t Die cushion stroke in table:400 mm Die cushion area in table:2300 x 1300 mm Die cushion pressure in ram:63 t Die cushion stroke in ram:160 mm Die cushion area in ram:1900 x 1300 mm Ram surface:2500 x 1730 mm Side window:1100 mm Oil volume:3500 l Power capacity:200,0 kW Dimensions (WxDxH):4,1 x 2,8 x 9,6 m Height above floor:6,4 m die cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable cutting impact absorption:hydraulic

Pressure:800 t distance between columns:3550 mm stroke:1100 mm Distance table/ram, max. stroke up, adjustment up:1900 mm Table surface area:3500 x 1800 mm pressure of drawing cushion in table:350 t Die cushion stroke in table:280 mm Die cushion pressure in ram:80 t Die cushion stroke in ram:160 mm Ram surface:3500 x 1800 mm Side window:1900 mm Weight:100,0 t Floor Space (WxD):5,3 x 4,3 m Height above floor:7,3 m Height below floor:5,0 - 6,0 m die cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable cutting impact cushioning:hydraulic sliding table:without rails for moving table

pressure:63 t throat:270 mm stroke:160 mm Distance table/ram, max. stroke up, adjustment up:360 mm table surface area:560 x 490 mm hole in the table:280 x 190 mm table height above floor:850 mm ram surface:450 x 360 mm oil volume:360 l power requirement:23,0 kW weight:4,6 t dimensions (W x D x H):1,2 x 1,8 x 2,9 m

pressure:40 t throat:285 mm stroke:500 mm Distance table/ram, stroke up:630 mm table surface area:560 x 560 mm pressure of drawing cushion in table:16 t stroke of drawing cushion in table:200 mm die cushion area:425 x 425 mm table height over floor:800 mm ram surface:450 x 450 mm power requirement:11,0 kW weight:4,0 t dimensions (WxDxH):1,15 x 1,8 x 2,85 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20 light guard:Sick

pressure:315 t distance between columns:1290 mm stroke:700 mm distance table/ram, max. stroke up, adjustment up:950 mm table surface area:1250 x 1100 mm pressure of drawing cushion in table:125 t stroke of drawing cushion in table:300 mm die cushion area:900 x 900 mm Capacity of ejector in ram:20 t Stroke of ejector in ram:250 mm table height over floor:800 mm ram surface:1250 x 1100 mm oil volume:1200 l power requirement:40,0 kW weight:22,0 t dimensions (WxDxH):2,6 x 1,6 x 5,2 m height over floor:4,05 m drawing cushion in table:hydraulic ejector in ram:hydraulic cutting impact cushioning:hydraulic

Pressure:315 t distance between columns:1350 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1000 mm table surface area:1200 x 1300 mm table height over floor:1245 mm side window:1250 mm ram surface:1200 x 1300 mm speed down:750 mm/s speed up:680 mm/s working speed:180 mm/s oil volume:2000 l power requirement:150,0 kW weight:35,0 t Dimensions (WxDxH):3,3 x 3,3 x 5,5 m height over floor:5,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact cushioning:motorisch verstellbar ram interlocking:hydraulisch

pressure:200 t throat:360 mm stroke:560 mm distance table/ram, max. stroke up, adjustment up:780 mm table surface area:740 x 720 mm pressure of drawing cushion in table:80 t stroke of drawing cushion in table:200 mm die cushion area:530 x 530 mm table height over floor:920 mm ram surface:560 x 560 mm slide drill hole x depth:70 mm power requirement:35,0 kW weight:10,0 t dimensions:1,3 x 2,0 x 3,4 m

pressure:250 t distance between columns:1125 mm stroke:250 mm distance table/ram, max. stroke up, adjustment up:800 mm table surface area:1100 x 900 mm pressure of drawing cushion in table:63 t stroke of drawing cushion in table:100 mm die cushion area:700 x 400 mm table height over floor:960 mm side window:700 mm ram surface:1080 x 900 mm oil volume:1000 l power requirement:35,0 kW weight:23,0 t Dimensions (WxDxH):2,5 x 2,3 x 4,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick foundation pit:not necessary

Description: Machine number 1800196 Outreach 360 mm Ram strokes 50/min Ram adjustment 100 mm Motor 18.5 kW Current voltage 400 V Max. pressing force: 160 to, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,400 x 3,200 mm, weight approx.: 13,000 kg, table surface area l x w : 1000x700 mm, stroke: 20 bis 140 mm

Description: Machine number 5391187 Ram strokes 110/min Ram adjustment 60 mm Max. pressing force: 60 to, stroke: 10 bis 90 mm, throat: 280 mm, table surface area l x w : 750x530 mm, total power requirement: 3 kW, weight approx.: 3,650 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 1,600 x 2,200 mm

Description: Machine number 6360290 Ram strokes 120/min Ram adjustment 55 mm Max. pressing force: 45 to, stroke: 4 bis 80 mm, throat: 230 mm, table surface area l x w : 690x460 mm, total power requirement: 3 kW, weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,400 x 200 mm

Description: Press line consiting of, 6x MÜLLER Hydraulic double column deep draw presses Type: (2x) ZE 630 Year of manufacture: 1962 and 1963 Capacity: 630 ton Ram weight: 19.000 kg Max. punch weight: 47.000 kg Max. tool dimensions: 2460 x 1900 mm Min. installation height: 710 mm Max. installation height (only for cutting tool): 1060 mm Machine dimensions: approx. 4000 x , 2000 x 5500 mm Machine weight: approx. 150.000 kg  , Type: (4x) ZE 400 Year of manufacture: (2x)1971, 1965 and 1960 Capacity: 400 ton Ram weight: (3x) 12.000 kg and (1x) 8.200 kg Max. punch weight: 16.400 kg Max. tool dimensions: (3x) 2460 x 1400 mm and (1x) 2040 x 1300 mm Min. installation height: 610 mm Max. installation height (only for cutting tool): 910 mm Machine dimensions: approx. 4000 x , 2000 x 5000 mm Machine weight: approx. 120.000 kg 7x Pick- and Place robots Manuf ...

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Tube diameter outside: 180 mm -Piston: Ø 115/145 mm -Stroke: 620 mm -Weight: 87 kg

NH fuse switch disconnector -NH2-400 A -500 V-630 A-AC22 B -690 V-630 A-AC-21B -Dimensions: 100/660/H190 mm -Weight: 5 kg

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Punching machine manufacturer: Müller, single-column eccentric press type PDE30SLFHK -Pressure capacity: 30 tons -Stroke: adjustable 80mm -Stroke rate: 80-380 strokes/min -Table size: 800 x 415 mm -Table recess: 195 x 340 mm - Projection: 220 mm -Punching fixture: Ø 40 mm -Insertion height 400 mm -Roller feed manufacturer: ALBA type EVS200/0.1 -Feed/stroke: from 0.1 - 6500 mm -Material width: from 10 - 200 mm -Material thickness: from 0.5 - 2.0 mm -Dimensions: 1620/1715/H2250mm, 420/1000/H1110mm, 700/630/H1050mm -Weight: 2860kg, 143kg, 104kg

Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press -Manufacturer: Müller, hydraulic single-column press type HEP15 -Pressing force: 15 tons -Clamping table: 900 x 500 mm -Projection: 265 mm -Max. Stroke: 430 mm -Operation: foot pedal -Motor: Siemens 4.0 kW -Dimensions: 1450/900/H2300 mm -Weight: 1646 kg