The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 330 mm turning length: 140x130 mm control: turning diameter over slide: 140 mm travel -x axis: 107 mm travel -z axis: 230 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power capacity: max 22 kW volt: V ampere: A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power capacity: max 22 kW volt: V ampere: A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
车削直径: 200 mm 车削长度: 508 mm X 轴: 176 mm Z轴: 520 mm 控制: 发那科系列 O-TD 总功率要求: kW 机器重量 约: 3,2 t 机器尺寸: 2,73x1,98x1,64 m
X 行程:700 毫米 Y行程:400毫米 Z 行程:330 毫米 控制:发那科 31iB5 工作台尺寸:850 x 410 毫米 :21 法赫 车削速度:10.000 U/分钟 内部冷却系统:20 巴 总功率要求:千瓦 机器重量 CA.: T 机器尺寸 CA.: M
罗博德里尔 MC 010 X 轴: 500 mm Y 轴: 380 mm Z 轴: 300 mm 主轴入院 (ISO): BT30 控制 : 发那科 16-M 工具转换器: 是 刀柄数量:10 位 转数: 10 > 8000 rpm
Fanuc Laser-model C3000 Type A04B-0811-B311 44 kVa - 130 amp Type A04B-0811-B511
Number of axes: 6, reach: 3100mm, max. load capacity: 125kg, controls: FANUC SYSTEM R-30iB Plus, weight: 1.115t, operating hours counter: ca. 100h, with control system, an inspection is possible.
This Fanuc Robodrill D21MiA5 Vertical Machining center was manufactured in the year 2014. It has 4 axis. The machine has a spindle speed of 21000 rpm. Open the attached PDF document to see all additional options of machine configuration (scroll down to access the document).
This FANUC Robocut Alpha 0iE CNC Wire Cut EDM Machine was manufactured in 2013 and is equipped with a FANUC 31i-WA control. It has 5 axes (X-axis: 370 mm / Y-axis: 270 mm / Z-axis: 255 mm / U-axis: 60 mm / V-axis: 60 mm) and can operate with a maximum workpiece weight of 500 kg. In total it has operated 17,500 hours from which 4,850 are cutting hours.
This FANUC Robocut α-1iA erosion machine was made in the year 2000 in Japan. It is equipped with a Fanuc Series 18i-W control unit. The machine has a max work table load of 1000 kg.
This Fanuc Robodrill a-T21iEL Vertical Machining center was manufactured in the year 2006 in Japan. It is equipped with a Fanuc Series 31i-A5 control unit. The machine has a spindle speed of 12000 rpm.
This FANUC ARC Mate 100i Robot machine was manufactured in 2000 in Netherlands. It has 6 axes and a payload capacity of 6 kg (13 lbs). It offers a reach of 1368 mm (54 in) with a repeatability of ±0.1 mm (.0039 in). It operates at the following motion speeds: J1-J3 at 120 °/s (2.09 rad/s), J4-J5 at 360 °/s (6.28 rad/s), and J6 at 450 °/s (7.85 rad/s). Its motion range includes J1 at -330°, J2 at -210°, J3 at -299°, J4 at -380°, J5 at -280°, and J6 at -640°. Contact us anytime for further information.
This FANUC Robocut ALPHA-0B Erosion machine was manufactured in the year 1995. It is equipped with a Fanuc Series 16-W control unit and has 4 axis. The machine has a wire tension: 0-2500 g.
Fanuc Robodrill D14LiB Plus Vertical Machining Center Machine is like new condition Table size : 850 mm x 410 mm X : 700 mm Y : 400 mm Z : 330 mm 10 pieces of tool holder, and some other tools will be given together with machine
控制面板/机器操作终端 中的CNC控制 数控卷筒纸控制 发那科 A14B 型 - 0048 - 0002 建造年份:1990- 机器控制面板 - 电子手轮 - 柔性硅胶 PC 键盘 宽 x 高 x 深:600 x 260 x 350 毫米 重量: 约 40 公斤 现货供应,功能未经测试,非常适合作为备件载体。 二
6轴交流伺服驱动器,伺服控制器,伺服变频器,伺服 放大器,伺服控制器,变频器, 机器人 驱动控制器 FANUC 型号 A06B-6105-H0003 编号 V07Z08282 输入电压: 200 - 240 VAC 额定功率: 1.5 kW 轴输出数量:6 输出电流:6 x 13 A 总输出电流:最大 78 A 手册号:B-81465 标准:EN50178 内置印刷电路板: A16B-2000-0063/07D A16B-3200-0440/05C - 不包括 Plexiglas盖 尺寸 宽 x 高 x 深 70 x 170 x 380 毫米 重量 16.5 千克 与新的/未使用的一样好 在开封的原始纸箱中 从库存溶解; 使
hours 76361 hours; 6-axis equipped with: rotator; fastening plate (1000x1000mm); transit hose (pneumatic/electrical connection); Fanuc System R-J3ib control box (180kg); Fanuc A05B-2301-C375 remote control (2005);
Equipped with ARC SR-A3510 welding machine. Includes Binzel welding torch cleaner.
Used Robot Palletizer Fanuc 2003 The Ultimate Solution for Palletizing Operations Are you looking for a reliable and efficient robot palletizer for your business operations Look no further than the 2003 Fanuc Robot Palletizer model M 410 iB 160 Equipped with a pick up head for cardboard and available base this palletizer is designed specifically for palletizing tasks With its intelligent cable routing inside the hollow wrist high operating speeds and high inertia and wrist moments this machine can handle large grippers and heavy payloads with ease Its 6 axis control servo gripper provides better adaptability in handling products of different sizes Operating within an optimized workspace and with high vertical travel this robot can develop pallets up to a height of almost 3 meters The integrated base and controller in the pedestal or the available non pedestal version saves floor space an ...
Used Robot Depalletizer Fanuc 2003 The Ultimate Solution for Depalletizing Operations Are you looking for a reliable and efficient robot depalletizer for your business operations Look no further than the 2003 Fanuc Robot Depalletizer model M 410 iB 160 Equipped with a pick up head for cardboard and an available base this depalletizer is designed specifically for depalletizing tasks With its intelligent cable routing inside the hollow wrist high operating speeds and high inertia and wrist moments this machine can handle large grippers and heavy payloads with ease Its 6 axis control servo gripper provides better adaptability in handling products of different sizes Operating within an optimized workspace and with high vertical travel this robot can depalletize products up to a height of almost 2 7 meters The integrated base and controller in the pedestal or the available non pedestal versio ...
Submerged Wire FANUC ROBOCUT Alpha 1-ib with auto wire thread, Information about technical data are not binding., Machine available subject to prior sale., X-y-z axes travel: 550x370x310 mm, U-v axes travel: 120x120 mm, Taper angle: ± 30°, Automatic wire threading and rethreading: yes, Maximum workpiece dimension: 1000x800x300 mm, Cnc: FANUC 180is - WB, Filter type: Cartridge, Weight: 3.000 Kg, Accessories: Chiller unit
[embed]https://youtu.be/tU4z-j-vDnw[/embed] FANUC ALPHA 0iB - 2003 线切割电火花
For sale wire EDM fanuc tape cut - w2 Year 1989 Kept and running well available immediately for viewing
Fanuc Robodrill a-T14 iB Vertical Machining Center Machine is in excellent condition
Fanuc W3 wire EDM machine Journeys: X-750, Y-450, Z-300, U-50, V-50 Max cutting angle: 10 degrees Max workpiece weight: 800 kg Programmable axes: X, Y, Z, U, V Max dimensions of the detail - 700 x 950 x 300
X axis: 550 mm Y axis: 370 mm U axis: 120 mm V axis: 120 mm Z axis: 310 mm Fast forward (X, Y, Z / U, V): 900 mm / min / 450 mm / min Max work piece weight: 1000 kgs Power: 13 KVA Year 2002 Equipped with: Control: FANUC 180 iS-W Refrigerator: Yes
Fanuc Robocut alpha-C600ib EDM Wire Cutting Machine Machine is in very good condition Maximum workpiece dimensions [mm]: 1050 Ã 820 Ã 300 Maximum workpiece weight [kg] : 1000
FANUC Robodrill Alpha T14iB vertical machining center from the year 2000 currently working. It is equipped with a Fanuc 16i-M CNC control unit. The machine has a spindle speed of 15000 rpm. Machine weight: 2100 kg CNC
Manufacturer: Fanuc Year of manufacture/SO/GO: 2000/-/- The machine is in good technical condition.
Type: MATRA TAPE CUT W2 Parameters: 500 mm, 350 mm Manufacturer: Fanuc Year of production / SO / GO: 1991 / - / - Description: The machine is in good technical condition. X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 300 mm Voltage: 200V AC + -10%; three-phase; 50 / 60Hz Cooling water temperature: 10-25 ° C Water flow: 15-35 liters / minute Sold including: 1st filter SW37 D340xd46xH450mm - 3pcs 2.Savah RVH600 - anti-rusting workpiece - 5 liters 3.Eleion plus - resin to reduce the conductivity of working water - 50 liter barrel - full up to 3/4 volume 4. Various small spare parts - see. photo- Dimensions L x W x H: 3500 x 2400 x 2400 mm Weight: 2300kg Upon agreement, the possibility of a tour in progress.
GD-12 - electric scheme - user manual - programming with error codes - technical instruction with drawings GLD-12 - electric scheme - technical instruction BAR FEEDER IEMCA SHOP - electric scheme - operating instructions (setting, parameters, errors) BAR FEEDER FMB SHOP - electric scheme - operating instructions (setting, parameters, errors) Additionally - an original cable for connecting a computer to the GD-12 and GLD12 via RS-232, if there is no RS-232 on your computer, you need a USB-RS-232 adapter. PC and machine communication software and all machine parameters. As well as: - user manual; - programming instructions; - electric scheme; - drawings of mechanics. this is the original documentation. a couple more unnecessary books and CNC documentation (this can be downloaded on the Internet in Russian) There are 3 main shops for shops - mechanics, electric ...
GLD-12 - electric scheme - technical instruction BAR FEEDER IEMCA SHOP - electric scheme - operating instructions (setting, parameters, errors) BAR FEEDER FMB SHOP - electric scheme - operating instructions (setting, parameters, errors) Additionally - an original cable for connecting a computer to the GD-12 and GLD12 via RS-232, if there is no RS-232 on your computer, you need a USB-RS-232 adapter. PC and machine communication software and all machine parameters. As well as: - user manual; - programming instructions; - electric scheme; - drawings of mechanics. this is the original documentation. a couple more unnecessary books and CNC documentation (this can be downloaded on the Internet in Russian) There are 3 main shops for shops - mechanics, electrics, instruction manual.
Ref. -No.: 10370 Manufacturer: FANUC Year of construction: 1997 Type of control: CNC Control: FANUC Series 16-M Storage location: Halberstadt Country of origin: Irland X-Travel: 500 mm Y-Travel: 380 mm Z-Travel: 300 mm Machine length: 1560 mm Machine width: 2060 mm Machine Height: 2218 mm Rotary Table (Lxw): 650 x 380 mm Table Load: 200 kg Max. Tool Weight: 2 kg Max. Tool Length: 120 - 200 mm Max. Tool Diameter: 65 mm Tool change time: 1 s Tool Taper: MAS BT30, MAS P30T-1 (45°) Numbers Of Tools In Magazin: 10 Tool changer: Revolvertyp (Spindel unabhängig vom Revolver) Turning Speed Range - Stepless: 1-15000 mm / min Rapid Traverse X-Axis: 48 m / min Rapid Travel Y-Axis: 48 m / min Rapid Traverse Z-Axis: 48 m / min Weight Of The Machine Ca.: 1,7 t Max spindle speed: 8000 minâ»Â¹ Positioning accuracy in one direction (1): 0,006 / 300 mm Positioning repeatability (2): +/- 0,002 mm ...
Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: FANUC Series 16-W Technical data Max. dimensions of work piece: Length: 650 mm Width: 420 mm Height: 160 mm Table load max.: 250 kg Longitudinal traverse (X-axis): 320 mm Cross traverse (Y-axis): 110 mm Vertical travel (Z axis): 180 mm U axis: 120 mm V-axis: 120 mm Rapid traverse:: 900 / 450 mm/min Total volume of dielektric: 260 l Voltage 50 Hz 3x: 400 Volt Total power required: 11 kVA Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1800 mm Width: 1600 mm Height: 2000 mm
工件重量: 0 kg 控制轴数: 0 工件直径 最小: 0 mm 旋转半径最大: 0 mm (1) 单 /(2) 双夹具: 1 MACH-id 5482 制作 发那科+罗芬 类型 S- 420 iF / SM 2000