二手 ENGEL 出售

Injection moulding machine Manufacturer: Engel Model: ES 330 HL Year of manufacture: 2000 Capacity: 90 Tn Working hours: 50290 h

Engel Injection Moulding Machine With Robot Machine is in good working condition

Clamping force [kN] 23000 Dimensions of mounting plates (hxv) [mm] 2,900 x 2,500 Clearance between columns (hxv) [mm] 2.000x1.600 Maximum opening width [mm] 3000 injection unit Screw diameter [mm] 135 Injection volume [cm3] 8870 Dimensions and weight Net weight with control cabinet [t] 141

INJECTION UNIT Screw diameter: 30 mm Calculated injection volume: 98 cm³ Pressure on the material: 1450 bars CLOSING UNIT Mold thickness Mini / Max: 190/330 mm

Clamping force 120 tons. Ecodrive drive system -significant energy savings compared to a traditional drive. ! the control needs repair: an error occurs when the machine is turned on

Manufacturer: Engel Model: 100T / 310 E MOTION Year of manufacture: 2004 Capacity: 100 Tn

Control type: CC200 Number of hours: 8,000 hours Closing Closing force: 110 T Opening stroke: 350 mm Between columns: rotating table: 1,200 mm Plate dimensions: rotating plate: 1,200 mm Mini/maxi mold: 250 mm Max distance between trays: 600 mm Injection: Screw diameter: 18 mm Screw length: 18.7D cm3: 38 Bars: 2060 General: Motor power: 15KW Heating power: 5.3KW Closing weight: 10T Injection weight: Length dimensions: 2.62M Width dimensions: 1.68M Height dimensions: 4M Options: Bi metal: yes

Injection unit Screw diameter: 45 mm Calculated injection volume: 319 cm3 Pressure on the material: 1520 bars Closing unit Closing force: 1250 kN Dimensions of the trays: 740 x 700 mm General Heating power: 20 kW Weight: 9000 kg Other Equipment : Commissioned: 1999 Number of hours: 46241 h Tonnage: 125

Year of manufacture: 2007 Control Type: CC100 Number of hours: 39600 h Closing force: 50 T Distance between columns: 500 mm x 450 mm Injection volume: 69 cm3 Injection pressure: 2400 bar

Screw diameter: 40 mm Shot weight: 263.55 g Max. Injection volume: 251 cmᶟ Max. screw stroke: 200 mm Injection ratio: 198 cmᶟ / sec Closure components: Closing force: 130 t Clearance between columns: No columns Max dimensions of the table plates: 750x700 mm Ejector: hydraulic Closing system: hydraulic Control: CC 100 EBIAS 9.42 Working hours: 73276 Robot: ER-HLI 51 VC EP5

Closing unit Clamping force [kN] 400 Dimensions of mounting plates (hxv) [mm] 510 x 535 Clearance between columns (hxv) [mm] 320 x 320 min./ max. mold height [mm] 150 injection unit Screw diameter [mm] 22 Injection volume [cm3] 38 Injection pressure [bar] 2050 Electric-hydraulic equipment Nominal power of the pump motor [kW] 10 Heater power [kW] 5 Dimensions and weight Net weight with control cabinet [t] 2.5 Dimensions (L x W x H) [m] 3.30 x 1.18 x 1.67

Control type: CC 200 Number of hours: 28,100 hours Closing force: 400T Opening stroke: 1000 mm Between columns: 1300 x 1100 mm Tray dimensions: 1300 x 1100 mm Mini/maxi mold: 450 mm Max distance between trays: 1450mm Injection: Screw diameter: 55 mm Screw length: 20D cm3: 510 Bars: 2050 General: Motor power: 55kw Heating power: 12.9kw Closing weight: 29T Injection weight: Length dimensions: 8.60 m Width dimensions: 2.20m Height dimensions: 2.50 m Options: Cores: 2 Robot interface: yes Bi metal: yes Others: Magnetic plate, 6 hydraulic sequentials? Robot KUKA KR 60L30-40KS 2012

90T Engel ES 330/70H. Used but in excellent condition with very low hours (56171). The machine was originally a 70T but it was uprated to 90T by the previous owner. Clamping Force: 90 Up-rated Screw Diameter: 35mm DBTB: 470 X 470mm Core Pull: 2 Air Circuit: 2 Please note - The hopper dryer will be removed and not included in the sale.

Engel ES 1350/275 HL ST Year of production: 1999 Injection components: Screw diameter [mm]: 60 Max injection weight PS [g]: 547 Injection pressure [bar]: 1834 Closure components: Closing force [kN]: 2750 Table plates dimensions [mm]: 1050 x 900 Min / max mold height [mm]: 350/850 Ejector stroke [mm]: 380 Control: EC100 Additional equipment: Robot: Engel ER-HLI71 Hot runners - 6 items Hydraulic cores 1 pc Pneumatic cores 1 pc Dimensions: Length / width / height [m]: 7.1 × 2.9 × 2.7 Weight [t]: 19.6 The machine is still in operation and can be inspected at the companys premises. You can make a purchase only after inspecting the machine at the companys premises

2005 model little used Very clean plastic injection machine Injection molding machine Engel Victory 500/150 Pro Tech Closing force - 150 tons Year: 2005 Column passage: 740 x 680 mold holder shelves Screw diameter: 40 Injection volume - 251 ccm Min/Max mold thickness: 300 Jacks: 1 Euromap: 500/120 Moving floor movement: 507 Min/Max die height - 300/900 mm Machine weight - 9600 kg Opening path - 600 mm Injection pressure - 1302 bar Machine with robot and safety cage Injection size - 231 g Roller dimensions - 750X520 mm Oil tank capacity - 450 liters

ENGEL 800 T injection press + ENGEL robot + Magnetic plates REF: 5550/800 Screw diameter: 105 mm L/D ratio: 20 Maximum material pressure: 1600 bars Injectable volume: 3720 cm3 Lamination: 183 g/s Dosing stroke: 430 mm

Machine dimensions Length 2800mm Width 1500mm Height 3500mm Weight 4500 kg Closing system Closing type vertical; column-less Clamping force 80t Injection system Screw diameter 18 mm Max injection pressure 11.50 Pa Max injection volume 50g Additional equipment cnc control Vertical injection Pressure measurement in the mold

Engel Victory 330/90 injection molding machine for sale. Year of production: 2009. Clamping force: 90 tons. Screw diameter 40 mm. Hours worked: approximately 60 thousand. The machine is in very good technical and visual condition. Working machine, possibility of testing on the buyers injection mold.

ENGEL VICTORY 330/110 Tech Injection moulding machine Year manufactured: 2001 Photos attached

screw diameter 55mm, max stroke volume 475 cm3, injection pressure 1179 bar, increased injection pressure 1579 bar, clamping plates 860x830mm, max mold height 700mm, max plate spacing 950mm, 146156 Mh, included in the sale and price is the manipulator ERC43/1-EA

Closing unit Clamping force [kN] 1500 Dimensions of mounting plates (hxv) [mm] 850 x 750 injection unit Screw diameter [mm] 40 Injection volume [cm3] 251 Injection pressure [bar] 2019 Electric-hydraulic equipment Nominal power of the pump motor [kW] 23 Heater power [kW] 16 Dimensions and weight Net weight with control cabinet [t] 9.60 Dimensions (L x W x H) [m] 5.54 x 1.86 x 2.20

Engel 330/90HL injection press Year 1996 Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Engel 600/145 injection molding machine Year 1995 Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Closing force: 50 T Opening stroke: 400 mm Between columns: 500 mm x 450 mm Tray dimensions: 500 mm x 450 mm Mini/maxi mould: 200 mm Max gap between trays: 600 mm Injection: Screw diameter: 25mm Screw length: 20D cm3: 45 Bars: 2400 General: Motor power: 15 kW Heating power: 5.3 kw Closing weight: 3T

Engel ERC 33 injection molding machine Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Clamping force [kN] 5500 Dimensions of mounting plates (hxv) [mm] 1345 x 1280 Clearance between columns (hxv) [mm] 915 x 860 Maximum opening width [mm] 850 injection unit Screw diameter [mm] 80 Injection volume [cm3] 1960 Injection weight [g] 1765 Injection pressure [bar] 1730

Engel 330/80 injection press Year 1990 Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Manufacturer : ENGEL Model: VICTORY 200-45T Year of manufacture: 2005 Number of hours: 42500 h Closing force: 45 T Control Type: CC100 Opening stroke: 400 mm Distance between columns: 500 x 450 mm Tray dimensions: 500 x 450 mm Mini/maxi mould: 200 mm Max gap between trays: 600 mm Screw diameter: 25mm Screw length: 20D Injection volume: 69 cm3 Injection pressure: 2400 bar Motor power: 15 kW Heating power: 12 kW Closing weight: 2.9 T Dimensions length: 3.4m Dimensions width: 1.3 m Dimensions height: 1.80 m Cores: 0 robot interface Bi-metal

Closing unit Clamping force [kN] 6500 Clearance between columns (hxv) [mm] 1025/930 Min./max. mold height [mm] 450/950 Maximum opening width [mm] 1800 Injection unit Screw diameter [mm] 90 Injection volume [cm3] 2480 Injection weight [g] 2254 Electrical and hydraulic equipment Rated power of the pump motor [kW] 55 Heater power [kW] 62

Engel Victory 200/50 Focus Shot weight: 89 g Closing force: 500 kN Screw diameter: 30 mm Injection pressure: 1451 (2205) bar Column spacing: No columns Plate size: 450 x 500 mm Type of control: EC 200 Language: German, Other Installed power: 31 kW Working hours: 79,044 h Weight: 2700 kg Dimensions: 3.5 x 1.4 m A string of cores

INJECTION UNIT Screw diameter: 45 mm Pressure on the material: 2400 bars CLOSING UNIT Closing force: 1800 kN Mold thickness Mini / Max: 250/600 mm Passage between columns: 580 x 580 mm Tray size: 780 x 780 mm With 1 hydraulic unit

Closing force: 110 T Opening stroke: 500 mm Between columns: 790 mm x 680 mm Tray dimensions: 790 mm x 680 mm Mini/maxi mould: 300mm Max gap between trays: 800 mm Motor power: 18.5 kW Heating power: 7.4kw

Engel ES 1350/400 HL injection molding machine Year of production - 2000 Screw diameter - 55 mm Injection volume - 618 ccm Injection weight - 556g Closing force - 4000 kN Min.form height - 250 mm Max. mold height - 900 mm Tie-bar-less machine Injection pressure - 2183 bar machine with a robot, a cage, two conveyor belts Weight - 30,000 kg Dimensions in: 7.8m x 2.25m x 2.33m

Control Type: CC200 Screw length: 20D Closing force: 40 T Opening stroke: 400 mm Between columns: 500 mm x 450 mm Tray dimensions: 500 mm x 450 mm Mini/maxi mould: 200 mm Max gap between trays: 600 mm

Machine: ENGEL 100T E ELECTRIC MOTION YEAR 2011 Year: 2011 Control type: CC200 Number of hours: 32 718H Closing Closing force: 100T Opening stroke: 460 mm Between columns: 520 x 520 mm Tray dimensions: 760 X 760 mm Mini / maxi mold: 250/600 mm Max distance between plates: 1060 mm Injection: Screw diameter: 35mm Screw length: 20D cm3: 168 Bars: 2400 General: Motor power: 21KW Heating power: 9.2KW Closing weight: 8t4 Dimensions length: 5.9m Dimensions width: 1.7m Dimensions height: 2.2m Options: Cores: NO Robot interface: YES Bi metal: YES

ENGEL 40T VERTICAL INSERT 200V40 + rotary table Control Type: CC200 Number of hours: 9000 H Closing force: 40T Opening stroke: 330 mm Rotary table: 1200 mm Tray dimensions: 1200 mm Mini/maxi mould: 190 mm Max gap between trays: 520 mm Injection: Screw diameter: 18mm Screw length: 20D cm3: 38 Bars: 2060 General: Motor power: 15KW Heating power: 5.3KW Cores: Robot interface: no Bi metal: yes Others: rotary table

- 欧洲地图：E12压力机，E67机器人，通过E12 / E67转换器连接 - 包括威特曼W733-0398机器人2007，X900，Y1800，Z3000，C-pneu - 螺杆直径：55毫米 - 注射体积：617厘米？ - 螺杆长径比：20 - 锁模力：3.500 kN - 模具高度最大：860 mm - 模具高度最小： 250 mm - 级联/顺序阀门：4 - 压板尺寸 （高 x v）： 1.080 x 1.080 mm - 拉杆之间的距离 （高 x v）： 735 x 735 mm - 喷射力：3.500 kN - 控制：CC100

Used machine in good condition. Available for immediate delivery. - Screw diameter: 30 mm - Shot weight max: 104 g - Injection rate: 111 cm?/s - Injection pressure: 2.400 bar - Injection volume: 113 cm? - Screw speed: 400 rpm - Screw L/D ratio: 23,6 - Nozzle stroke / force max.: 250 / 47 mm / kN - Nozzle stroke max: 160 mm - Clamping force: 1.600 kN - Mould opening stroke max: 600 mm - Mould height max: 300 mm - Mould height min: 300 mm - Daylight between platens max: 900 mm - Distance between tie-bars h: 550 mm - Distance between tie-bars v: 550 mm - Platen size h: 750 mm - Platen size v: 750 mm - Ejector force: 61 kN - Control: CC200 - Oil tank capacity: 460 l - Power: installed max: 30 kW - Operating hours: 28.140 - Dimensions (long x wide x high): 5.800 x 1.700 x 2.400 mm - Weight: 9.500 kg

- 恩格尔急诊室接口。 - 为 CC300 控制做好准备 - 与机器兼容： VC 从 28 到 220t EM 从 30 到 160t 电磁兼容从50-180吨 - 1 x 真空回路 - 1 x 压缩空气回路 - 兼容机器： VC88-220， EM30-160， EMC50-180 t - 行程 （Z）： 1.400 毫米 - 行程 （Y）： 800 毫米 - 行程 （X）： 400 毫米 - 有效载荷：5公斤 - 驱动方式： X， Y， Z： 伺服， C： 气�

- 恩格尔急诊室接口。 - 为 CC300 控制做好准备 - 与机器兼容： VC 从 28 到 220t EM 从 30 到 160t 电磁兼容从50-180吨 - 1 x 真空回路 - 1 x 压缩空气回路 - 兼容机器： VC88-220， EM30-160， EMC50-180 t - 行程 （X）： 400 毫米 - 行程 （Y）： 800 毫米 - 行程 （Z）： 1.400 毫米 - 有效载荷：5公斤 - 驱动方式： X， Y， Z： 伺服， C： 气�

Used machine in good condition. Available for immediate delivery. - Air Valves: n/a - Distance between tie-bars (h x v): 460 x 410 mm - Screw diameter: 25 mm - Shot weight max: 54 g - Injection rate: 108 cm?/s - Injection pressure: 2.400 bar - Injection volume: 59 cm? - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 225 / 28 mm / kN - Clamping force: 1.000 kN - Mould opening stroke max: 350 mm - Mould height max: 450 mm - Mould height min: 150 mm - Daylight between platens max: 800 mm - Platen size (h x v): 650 x 600 mm - Cascades / Sequential valve gates: n/a - Heating zones: 4 2 - Control: CC200 - Core pulls: n/a - Oil tank capacity: - l - Operating hours: 16.280 - Power: installed max: 22 kW - Weight: 4.500 kg - Dimensions (long x wide x high): 4.300 x 1.300 x 1.900 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 45 mm - Shot weight max: 293 g - Injection rate: 230 cm?/s - Injection pressure: 2.360 bar - Injection volume: 318 cm? - Screw speed: 230 rpm - Nozzle stroke / force max.: 350/67 mm / kN - Ejector stroke / force max.: 200/83 mm / kN - Clamping force: 3.000 kN - Mould opening stroke max: 850 mm - Mould height min: 350 mm - Daylight between platens max: 1.200 mm - Platen size (h x v): 1050 x 650 mm - Mold opening force: 196 kN - Control: CC100 - Oil tank capacity: 810 l - Power: installed max: 55 kW - Dimensions (long x wide x high): 6.700 x 2.000 x 2.300 mm - Weight: 21.000 kg

Used machine in good condition. Available for immediate delivery. - Screw diameter: 25 mm - Clamping force: 1.200 kN - Shot weight max: 63 g - Injection rate: 104 cm?/s - Injection pressure: 2.400 bar - Injection volume: 69 cm? - Screw speed: 550 rpm - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 200 / 28 mm / kN - Ejector stroke / force max.: 130 / 40 mm / kN - Mould opening stroke max: 500 mm - Mould height min: 300 mm - Daylight between platens max: 800 mm - Platen size (h x v): 740 x 470 mm - Mold opening force: 38 kN - Control: CC200 - Oil tank capacity: 300 l - Power: installed max: 22 kW - Weight: 7.200 kg - Dimensions (long x wide x high): 4.400 x 1.500 x 2.000 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 25 mm - Clamping force: 1.200 kN - Shot weight max: 63 g - Injection rate: 104 cm?/s - Injection pressure: 2.400 bar - Injection volume: 69 cm? - Screw speed: 550 rpm - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 200 / 28 mm / kN - Ejector stroke / force max.: 130 / 40 mm / kN - Mould opening stroke max: 500 mm - Mould height min: 300 mm - Daylight between platens max: 800 mm - Platen size (h x v): 740 x 470 mm - Mold opening force: 38 kN - Control: CC200 - Oil tank capacity: 300 l - Power: installed max: 22 kW - Weight: 7.200 kg - Dimensions (long x wide x high): 4.400 x 1.500 x 2.000 mm

二手机器状况良好。可立即交付。 - 螺杆直径：90毫米 - 注射压力：1.919巴 - 注射体积：2.740厘米？ - 螺杆长径比：20 - 喷射器行程/力最大： 300 / - 毫米 / 千牛 - 锁模力：8000 kN - 最大开模行程： 1.350 mm - 模具最大高度：2.000 mm - 模具高度最小： 650 mm - 压板尺寸 （高 x v）： 1.570 x 1.480 毫米 - 拉杆间距 （高 x 低）： 1.025 x 935 mm - 核心拉力：5 - 营业时间：62.870 - 尺寸（长 x 宽 x 高）：10.085 x 5.300 x 2.120 mm - 重量：38.000公�

二手机器状况良好。可立即交付。 - 螺杆直径：55毫米 - 最大注射重量：460克 - 注射压力： 1.650 / 2.050 bar - 注射体积：510厘米？ - 锁模力：3.500 kN - 最大开模行程： 1.000 mm - 压板间距最大： 1.650 mm - 压板尺寸 （高 x v）： 1.200 x 1.100 mm - 拉杆之间的距离 （高 x v）： 无/a 毫米 - 控制：CC200 - 核心拉力：4 - 功率：安装功率最大：45千瓦 - 尺寸（长 x 宽 x 高）：7.500 x 2.200 x 2.400 mm - 重量：27.000公�

二手机器状况良好。可立即交付。 - 空气阀： 1 - 螺杆直径：50毫米 - 最大注射重量：353克 - 注射速度：217厘米/秒 - 注射压力：1.430巴 - 注射量：343厘米？ - 压板尺寸 （高 x v）： 820 x 750 mm - 喷射力：1750 kN - 核心拉力：1 - 功率：安装最大：15，3 + 30千瓦 - 营业时间：0 - 尺寸（长 x 宽 x 高）：5.750 x 1.680 x 2.190 毫米 - 重量：11.500公�